[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH REBASED v5 1/2] spapr: nvdimm: Implement H_SCM_FLUSH hcall
|
From: |
David Gibson |
|
Subject: |
Re: [PATCH REBASED v5 1/2] spapr: nvdimm: Implement H_SCM_FLUSH hcall |
|
Date: |
Thu, 8 Jul 2021 16:12:37 +1000 |
On Wed, Jul 07, 2021 at 09:57:21PM -0500, Shivaprasad G Bhat wrote:
> The patch adds support for the SCM flush hcall for the nvdimm devices.
> To be available for exploitation by guest through the next patch.
>
> The hcall expects the semantics such that the flush to return
> with one of H_LONG_BUSY when the operation is expected to take longer
> time along with a continue_token. The hcall to be called again providing
> the continue_token to get the status. So, all fresh requests are put into
> a 'pending' list and flush worker is submitted to the thread pool. The
> thread pool completion callbacks move the requests to 'completed' list,
> which are cleaned up after reporting to guest in subsequent hcalls to
> get the status.
>
> The semantics makes it necessary to preserve the continue_tokens and
> their return status across migrations. So, the completed flush states
> are forwarded to the destination and the pending ones are restarted
> at the destination in post_load. The necessary nvdimm flush specific
> vmstate structures are added to the spapr machine vmstate.
>
> Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
> ---
> hw/ppc/spapr.c | 6 +
> hw/ppc/spapr_nvdimm.c | 240
> +++++++++++++++++++++++++++++++++++++++++
> include/hw/ppc/spapr.h | 11 ++
> include/hw/ppc/spapr_nvdimm.h | 13 ++
> 4 files changed, 269 insertions(+), 1 deletion(-)
>
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 4dd90b75cc..546d825dde 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -1622,6 +1622,8 @@ static void spapr_machine_reset(MachineState *machine)
> spapr->ov5_cas = spapr_ovec_clone(spapr->ov5);
> }
>
> + spapr_nvdimm_finish_flushes(spapr);
> +
> /* DRC reset may cause a device to be unplugged. This will cause troubles
> * if this device is used by another device (eg, a running vhost backend
> * will crash QEMU if the DIMM holding the vring goes away). To avoid
> such
> @@ -2018,6 +2020,7 @@ static const VMStateDescription vmstate_spapr = {
> &vmstate_spapr_cap_ccf_assist,
> &vmstate_spapr_cap_fwnmi,
> &vmstate_spapr_fwnmi,
> + &vmstate_spapr_nvdimm_states,
> NULL
> }
> };
> @@ -3014,6 +3017,9 @@ static void spapr_machine_init(MachineState *machine)
> }
>
> qemu_cond_init(&spapr->fwnmi_machine_check_interlock_cond);
> +
> + QLIST_INIT(&spapr->pending_flush_states);
> + QLIST_INIT(&spapr->completed_flush_states);
These need nvdimm in the variable names. There are any number of
things in the machine that could be the subject of some sort of flush.
> }
>
> #define DEFAULT_KVM_TYPE "auto"
> diff --git a/hw/ppc/spapr_nvdimm.c b/hw/ppc/spapr_nvdimm.c
> index 91de1052f2..4f8931ab15 100644
> --- a/hw/ppc/spapr_nvdimm.c
> +++ b/hw/ppc/spapr_nvdimm.c
> @@ -22,6 +22,7 @@
> * THE SOFTWARE.
> */
> #include "qemu/osdep.h"
> +#include "qemu/cutils.h"
> #include "qapi/error.h"
> #include "hw/ppc/spapr_drc.h"
> #include "hw/ppc/spapr_nvdimm.h"
> @@ -30,6 +31,7 @@
> #include "hw/ppc/fdt.h"
> #include "qemu/range.h"
> #include "hw/ppc/spapr_numa.h"
> +#include "block/thread-pool.h"
>
> /* DIMM health bitmap bitmap indicators. Taken from kernel's papr_scm.c */
> /* SCM device is unable to persist memory contents */
> @@ -375,6 +377,243 @@ static target_ulong h_scm_bind_mem(PowerPCCPU *cpu,
> SpaprMachineState *spapr,
> return H_SUCCESS;
> }
>
> +static uint64_t flush_token;
> +
> +static int flush_worker_cb(void *opaque)
> +{
> + int ret = H_SUCCESS;
> + SpaprNVDIMMDeviceFlushState *state = opaque;
> +
> + /* flush raw backing image */
> + if (qemu_fdatasync(state->backend_fd) < 0) {
> + error_report("papr_scm: Could not sync nvdimm to backend file: %s",
> + strerror(errno));
> + ret = H_HARDWARE;
> + }
> +
> + return ret;
> +}
> +
> +static void spapr_nvdimm_flush_completion_cb(void *opaque, int hcall_ret)
> +{
> + SpaprMachineState *spapr = SPAPR_MACHINE(qdev_get_machine());
> + SpaprNVDIMMDeviceFlushState *state = opaque;
> +
> + state->hcall_ret = hcall_ret;
> + QLIST_REMOVE(state, node);
> + QLIST_INSERT_HEAD(&spapr->completed_flush_states, state, node);
> +}
> +
> +static const VMStateDescription vmstate_spapr_nvdimm_flush_state = {
> + .name = "spapr_nvdimm_flush_state",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .fields = (VMStateField[]) {
> + VMSTATE_UINT64(continue_token, SpaprNVDIMMDeviceFlushState),
> + VMSTATE_INT64(hcall_ret, SpaprNVDIMMDeviceFlushState),
> + VMSTATE_UINT32(drcidx, SpaprNVDIMMDeviceFlushState),
> + VMSTATE_END_OF_LIST()
> + },
> +};
> +
> +static bool spapr_nvdimm_states_needed(void *opaque)
> +{
> + SpaprMachineState *spapr = (SpaprMachineState *)opaque;
> +
> + return (!QLIST_EMPTY(&spapr->pending_flush_states) ||
> + !QLIST_EMPTY(&spapr->completed_flush_states));
> +}
> +
> +static int spapr_nvdimm_post_load(void *opaque, int version_id)
> +{
> + SpaprMachineState *spapr = (SpaprMachineState *)opaque;
> + SpaprNVDIMMDeviceFlushState *state, *next;
> + PCDIMMDevice *dimm;
> + HostMemoryBackend *backend = NULL;
> + ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
> + SpaprDrc *drc;
> +
> + QLIST_FOREACH_SAFE(state, &spapr->completed_flush_states, node, next) {
> + if (flush_token < state->continue_token) {
> + flush_token = state->continue_token;
> + }
> + }
> +
> + QLIST_FOREACH_SAFE(state, &spapr->pending_flush_states, node, next) {
> + if (flush_token < state->continue_token) {
> + flush_token = state->continue_token;
> + }
> +
> + drc = spapr_drc_by_index(state->drcidx);
> + dimm = PC_DIMM(drc->dev);
> + backend = MEMORY_BACKEND(dimm->hostmem);
> + state->backend_fd = memory_region_get_fd(&backend->mr);
> +
> + thread_pool_submit_aio(pool, flush_worker_cb, state,
> + spapr_nvdimm_flush_completion_cb, state);
> + }
> +
> + return 0;
> +}
> +
> +const VMStateDescription vmstate_spapr_nvdimm_states = {
> + .name = "spapr_nvdimm_states",
> + .version_id = 1,
> + .minimum_version_id = 1,
> + .needed = spapr_nvdimm_states_needed,
> + .post_load = spapr_nvdimm_post_load,
> + .fields = (VMStateField[]) {
> + VMSTATE_QLIST_V(completed_flush_states, SpaprMachineState, 1,
> + vmstate_spapr_nvdimm_flush_state,
> + SpaprNVDIMMDeviceFlushState, node),
> + VMSTATE_QLIST_V(pending_flush_states, SpaprMachineState, 1,
> + vmstate_spapr_nvdimm_flush_state,
> + SpaprNVDIMMDeviceFlushState, node),
> + VMSTATE_END_OF_LIST()
> + },
> +};
> +
> +/*
> + * Assign a token and reserve it for the new flush state.
> + */
> +static SpaprNVDIMMDeviceFlushState *spapr_nvdimm_init_new_flush_state(
> + SpaprMachineState
> *spapr)
> +{
> + SpaprNVDIMMDeviceFlushState *state;
> +
> + state = g_malloc0(sizeof(*state));
> +
> + flush_token++;
> + /* Token zero is presumed as no job pending. Handle the overflow to zero
> */
> + if (flush_token == 0) {
> + flush_token++;
> + }
> + state->continue_token = flush_token;
> +
> + QLIST_INSERT_HEAD(&spapr->pending_flush_states, state, node);
> +
> + return state;
> +}
> +
> +/*
> + * spapr_nvdimm_finish_flushes
> + * Waits for all pending flush requests to complete
> + * their execution and free the states
> + */
> +void spapr_nvdimm_finish_flushes(SpaprMachineState *spapr)
> +{
> + SpaprNVDIMMDeviceFlushState *state, *next;
> +
> + /*
> + * Called on reset path, the main loop thread which calls
> + * the pending BHs has gotten out running in the reset path,
> + * finally reaching here. Other code path being guest
> + * h_client_architecture_support, thats early boot up.
> + */
> + while (!QLIST_EMPTY(&spapr->pending_flush_states)) {
> + aio_poll(qemu_get_aio_context(), true);
> + }
> +
> + QLIST_FOREACH_SAFE(state, &spapr->completed_flush_states, node, next) {
> + QLIST_REMOVE(state, node);
> + g_free(state);
> + }
> +}
> +
> +/*
> + * spapr_nvdimm_get_flush_status
> + * Fetches the status of the hcall worker and returns
> + * H_LONG_BUSY_XYZ if the worker is still running.
> + */
> +static int spapr_nvdimm_get_flush_status(SpaprMachineState *spapr,
> + uint64_t token)
> +{
> + int ret = H_LONG_BUSY_ORDER_10_MSEC;
> + SpaprNVDIMMDeviceFlushState *state, *node;
> +
> + QLIST_FOREACH_SAFE(state, &spapr->pending_flush_states, node, node) {
> + if (state->continue_token == token) {
> + goto exit;
There's no need for an ugly goto here. Just return.
> + }
> + }
> + ret = H_P2; /* If not found in complete list too, invalid token */
> + QLIST_FOREACH_SAFE(state, &spapr->completed_flush_states, node, node) {
> + if (state->continue_token == token) {
> + ret = state->hcall_ret;
> + QLIST_REMOVE(state, node);
> + g_free(state);
Likewise you can return here.
> + break;
> + }
> + }
> +exit:
> + return ret;
And here, and you won't need the 'ret' variable any more.
> +}
> +
> +/*
> + * H_SCM_FLUSH
> + * Input: drc_index, continue-token
> + * Out: continue-token
> + * Return Value: H_SUCCESS, H_Parameter, H_P2, H_LONG_BUSY
> + *
> + * Given a DRC Index Flush the data to backend NVDIMM device.
> + * The hcall returns H_LONG_BUSY_XX when the flush takes longer time and
> + * the hcall needs to be issued multiple times in order to be completely
> + * serviced. The continue-token from the output to be passed in the
> + * argument list of subsequent hcalls until the hcall is completely serviced
> + * at which point H_SUCCESS or other error is returned.
> + */
> +static target_ulong h_scm_flush(PowerPCCPU *cpu, SpaprMachineState *spapr,
> + target_ulong opcode, target_ulong *args)
> +{
> + int ret;
> + uint32_t drc_index = args[0];
> + uint64_t continue_token = args[1];
> + SpaprDrc *drc = spapr_drc_by_index(drc_index);
> + PCDIMMDevice *dimm;
> + HostMemoryBackend *backend = NULL;
> + SpaprNVDIMMDeviceFlushState *state;
> + ThreadPool *pool = aio_get_thread_pool(qemu_get_aio_context());
> + int fd;
> +
> + if (!drc || !drc->dev ||
> + spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
> + return H_PARAMETER;
> + }
> +
> + if (continue_token != 0) {
> + goto get_status;
Again, not really an idiomatically justified use of goto. Just put
the body in an if block - it's pretty simple so that's not excessively
indented.
> + }
> +
> + dimm = PC_DIMM(drc->dev);
> + backend = MEMORY_BACKEND(dimm->hostmem);
> + fd = memory_region_get_fd(&backend->mr);
> +
> + if (fd < 0) {
> + return H_UNSUPPORTED;
> + }
> +
> + state = spapr_nvdimm_init_new_flush_state(spapr);
> + if (!state) {
> + return H_HARDWARE;
> + }
> +
> + state->drcidx = drc_index;
> + state->backend_fd = fd;
> +
> + thread_pool_submit_aio(pool, flush_worker_cb, state,
> + spapr_nvdimm_flush_completion_cb, state);
> +
> + continue_token = state->continue_token;
> +
> +get_status:
> + ret = spapr_nvdimm_get_flush_status(spapr, continue_token);
> + if (H_IS_LONG_BUSY(ret)) {
> + args[0] = continue_token;
> + }
> +
> + return ret;
> +}
> +
> static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, SpaprMachineState
> *spapr,
> target_ulong opcode, target_ulong *args)
> {
> @@ -523,6 +762,7 @@ static void spapr_scm_register_types(void)
> spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem);
> spapr_register_hypercall(H_SCM_UNBIND_ALL, h_scm_unbind_all);
> spapr_register_hypercall(H_SCM_HEALTH, h_scm_health);
> + spapr_register_hypercall(H_SCM_FLUSH, h_scm_flush);
> }
>
> type_init(spapr_scm_register_types)
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index f05219f75e..1684d72546 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -12,10 +12,12 @@
> #include "hw/ppc/spapr_xive.h" /* For SpaprXive */
> #include "hw/ppc/xics.h" /* For ICSState */
> #include "hw/ppc/spapr_tpm_proxy.h"
> +#include "hw/ppc/spapr_nvdimm.h"
>
> struct SpaprVioBus;
> struct SpaprPhbState;
> struct SpaprNvram;
> +struct SpaprNVDIMMDeviceFlushState;
>
> typedef struct SpaprEventLogEntry SpaprEventLogEntry;
> typedef struct SpaprEventSource SpaprEventSource;
> @@ -248,6 +250,11 @@ struct SpaprMachineState {
> uint32_t numa_assoc_array[MAX_NODES + NVGPU_MAX_NUM][NUMA_ASSOC_SIZE];
>
> Error *fwnmi_migration_blocker;
> +
> + /* nvdimm flush states */
> + QLIST_HEAD(, SpaprNVDIMMDeviceFlushState) pending_flush_states;
> + QLIST_HEAD(, SpaprNVDIMMDeviceFlushState) completed_flush_states;
> +
> };
>
> #define H_SUCCESS 0
> @@ -328,6 +335,7 @@ struct SpaprMachineState {
> #define H_P7 -60
> #define H_P8 -61
> #define H_P9 -62
> +#define H_UNSUPPORTED -67
> #define H_OVERLAP -68
> #define H_UNSUPPORTED_FLAG -256
> #define H_MULTI_THREADS_ACTIVE -9005
> @@ -542,8 +550,9 @@ struct SpaprMachineState {
> #define H_SCM_UNBIND_MEM 0x3F0
> #define H_SCM_UNBIND_ALL 0x3FC
> #define H_SCM_HEALTH 0x400
> +#define H_SCM_FLUSH 0x44C
>
> -#define MAX_HCALL_OPCODE H_SCM_HEALTH
> +#define MAX_HCALL_OPCODE H_SCM_FLUSH
>
> /* The hcalls above are standardized in PAPR and implemented by pHyp
> * as well.
> diff --git a/include/hw/ppc/spapr_nvdimm.h b/include/hw/ppc/spapr_nvdimm.h
> index 764f999f54..24d8e37b33 100644
> --- a/include/hw/ppc/spapr_nvdimm.h
> +++ b/include/hw/ppc/spapr_nvdimm.h
> @@ -11,6 +11,7 @@
> #define HW_SPAPR_NVDIMM_H
>
> #include "hw/mem/nvdimm.h"
> +#include "migration/vmstate.h"
>
> typedef struct SpaprDrc SpaprDrc;
> typedef struct SpaprMachineState SpaprMachineState;
> @@ -21,5 +22,17 @@ void spapr_dt_persistent_memory(SpaprMachineState *spapr,
> void *fdt);
> bool spapr_nvdimm_validate(HotplugHandler *hotplug_dev, NVDIMMDevice *nvdimm,
> uint64_t size, Error **errp);
> void spapr_add_nvdimm(DeviceState *dev, uint64_t slot);
> +void spapr_nvdimm_finish_flushes(SpaprMachineState *spapr);
> +
> +typedef struct SpaprNVDIMMDeviceFlushState {
> + uint64_t continue_token;
> + int64_t hcall_ret;
> + int backend_fd;
> + uint32_t drcidx;
> +
> + QLIST_ENTRY(SpaprNVDIMMDeviceFlushState) node;
> +} SpaprNVDIMMDeviceFlushState;
> +
> +extern const VMStateDescription vmstate_spapr_nvdimm_states;
>
> #endif
>
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature