Re: [PATCH 2/3] docs: Add skeletal documentation of the emcraft-sf2

[Philippe Mathieu-Daudé]

On 7/5/21 2:20 PM, Peter Maydell wrote:
> Add skeletal documentation of the emcraft-sf2 machine.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
>  docs/system/arm/emcraft-sf2.rst | 10 ++++++++++
>  docs/system/target-arm.rst      |  1 +
>  MAINTAINERS                     |  1 +
>  3 files changed, 12 insertions(+)
>  create mode 100644 docs/system/arm/emcraft-sf2.rst
> 
> diff --git a/docs/system/arm/emcraft-sf2.rst b/docs/system/arm/emcraft-sf2.rst
> new file mode 100644
> index 00000000000..9f10b86427a
> --- /dev/null
> +++ b/docs/system/arm/emcraft-sf2.rst
> @@ -0,0 +1,10 @@
> +Emcraft SmartFusion2 SOM kit (``emcraft-sf2``)
> +==============================================
> +
> +The ``emcraft-sf2`` board emulates the SmartFusion2 SOM kit from
> +Emcraft (M2S010). This is a System-on-Module from EmCraft systems,
> +based on the SmartFusion2 SoC FPGA from Microsemi Corporation.
> +The SoC is based on a Cortex-M4 processor.
> +
> +At the moment only the system timer, system registers and SPI
> +controller are modelled.

Also UART and EMAC :)

> diff --git a/docs/system/target-arm.rst b/docs/system/target-arm.rst
> index 0a3ef309472..d316e684106 100644
> --- a/docs/system/target-arm.rst
> +++ b/docs/system/target-arm.rst
> @@ -86,6 +86,7 @@ undocumented; you can get a complete list by running
>     arm/sabrelite
>     arm/digic
>     arm/cubieboard
> +   arm/emcraft-sf2
>     arm/musicpal
>     arm/gumstix
>     arm/nrf
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 76a2c608d1e..dbbd71958ac 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1007,6 +1007,7 @@ M: Peter Maydell <peter.maydell@linaro.org>
>  L: qemu-arm@nongnu.org
>  S: Maintained
>  F: hw/arm/msf2-som.c
> +F: docs/system/arm/emcraft-sf2.rst
>  
>  ASPEED BMCs
>  M: Cédric Le Goater <clg@kaod.org>
>