qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 1/6] dp8393x: fix CAM descriptor entry index


From: Philippe Mathieu-Daudé
Subject: [PATCH 1/6] dp8393x: fix CAM descriptor entry index
Date: Sat, 3 Jul 2021 16:19:42 +0200

From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

Currently when a LOAD CAM command is executed the entries are loaded into the
CAM from memory in order which is incorrect. According to the datasheet the
first entry in the CAM descriptor is the entry index which means that each
descriptor may update any single entry in the CAM rather than the Nth entry.

Decode the CAM entry index and use it store the descriptor in the appropriate
slot in the CAM. This fixes the issue where the MacOS toolbox loads a single
CAM descriptor into the final slot in order to perform a loopback test which
must succeed before the Ethernet port is enabled.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/net/dp8393x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/hw/net/dp8393x.c b/hw/net/dp8393x.c
index 252c0a26641..11810c9b600 100644
--- a/hw/net/dp8393x.c
+++ b/hw/net/dp8393x.c
@@ -270,7 +270,7 @@ static void dp8393x_update_irq(dp8393xState *s)
 static void dp8393x_do_load_cam(dp8393xState *s)
 {
     int width, size;
-    uint16_t index = 0;
+    uint16_t index;
 
     width = (s->regs[SONIC_DCR] & SONIC_DCR_DW) ? 2 : 1;
     size = sizeof(uint16_t) * 4 * width;
@@ -279,6 +279,7 @@ static void dp8393x_do_load_cam(dp8393xState *s)
         /* Fill current entry */
         address_space_read(&s->as, dp8393x_cdp(s),
                            MEMTXATTRS_UNSPECIFIED, s->data, size);
+        index = dp8393x_get(s, width, 0) & 0xf;
         s->cam[index][0] = dp8393x_get(s, width, 1) & 0xff;
         s->cam[index][1] = dp8393x_get(s, width, 1) >> 8;
         s->cam[index][2] = dp8393x_get(s, width, 2) & 0xff;
@@ -291,7 +292,6 @@ static void dp8393x_do_load_cam(dp8393xState *s)
         /* Move to next entry */
         s->regs[SONIC_CDC]--;
         s->regs[SONIC_CDP] += size;
-        index++;
     }
 
     /* Read CAM enable */
-- 
2.31.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]