Re: [PATCH v5 02/10] ACPI ERST: specification for ERST support

Information on the implementation of the ACPI ERST support.

Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
---
docs/specs/acpi_erst.txt | 152 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 152 insertions(+)
create mode 100644 docs/specs/acpi_erst.txt

diff --git a/docs/specs/acpi_erst.txt b/docs/specs/acpi_erst.txt
new file mode 100644
index 0000000..79f8eb9
--- /dev/null
+++ b/docs/specs/acpi_erst.txt
@@ -0,0 +1,152 @@
+ACPI ERST DEVICE
+================
+
+The ACPI ERST device is utilized to support the ACPI Error Record
+Serialization Table, ERST, functionality. The functionality is
+designed for storing error records in persistent storage for
+future reference/debugging.
+
+The ACPI specification[1], in Chapter "ACPI Platform Error Interfaces
+(APEI)", and specifically subsection "Error Serialization", outlines
+a method for storing error records into persistent storage.
+
+The format of error records is described in the UEFI specification[2],
+in Appendix N "Common Platform Error Record".
+
+While the ACPI specification allows for an NVRAM "mode" (see
+GET_ERROR_LOG_ADDRESS_RANGE_ATTRIBUTES) where non-volatile RAM is
+directly exposed for direct access by the OS/guest, this implements
+the non-NVRAM "mode". This non-NVRAM "mode" is what is implemented
+by most BIOS (since flash memory requires programming operations
+in order to update its contents). Furthermore, as of the time of this
+writing, Linux does not support the non-NVRAM "mode".
+
+
+Background/Motivation
+---------------------
+Linux uses the persistent storage filesystem, pstore, to record
+information (eg. dmesg tail) upon panics and shutdowns. Pstore is
+independent of, and runs before, kdump. In certain scenarios (ie.
+hosts/guests with root filesystems on NFS/iSCSI where networking
+software and/or hardware fails), pstore may contain the only
+information available for post-mortem debugging.
+
+Two common storage backends for the pstore filesystem are ACPI ERST
+and UEFI. Most BIOS implement ACPI ERST. UEFI is not utilized in
+all guests. With QEMU supporting ACPI ERST, it becomes a viable
+pstore storage backend for virtual machines (as it is now for
+bare metal machines).
+
+Enabling support for ACPI ERST facilitates a consistent method to
+capture kernel panic information in a wide range of guests: from
+resource-constrained microvms to very large guests, and in
+particular, in direct-boot environments (which would lack UEFI
+run-time services).
+
+Note that Microsoft Windows also utilizes the ACPI ERST for certain
+crash information, if available.
+
+
+Invocation
+----------
+
+To utilize ACPI ERST, a memory-backend-file object and acpi-erst
+device must be created, for example:
+
+ qemu ...
+ -object memory-backend-file,id=erstnvram,mem-path=acpi-erst.backing,
+ size=0x10000,share=on
+ -device acpi-erst,memdev=erstnvram
+
+For proper operation, the ACPI ERST device needs a memory-backend-file
+object with the following parameters:
+
+ - id: The id of the memory-backend-file object is used to associate
+   this memory with the acpi-erst device.
+ - size: The size of the ACPI ERST backing storage. This parameter is
+   required.
+ - mem-path: The location of the ACPI ERST backing storage file. This
+   parameter is also required.
+ - share: The share=on parameter is required so that updates to the
+   ERST back store are written to the file immediately as well. Without
+   it, updates the the backing file are unpredictable and may not
+   properly persist (eg. if qemu should crash).
+
+The ACPI ERST device is a simple PCI device, and requires this one
+parameter:
+
+ - memdev: Is the object id of the memory-backend-file.
+
+
+PCI Interface
+-------------
+
+The ERST device is a PCI device with two BARs, one for accessing
+the programming registers, and the other for accessing the
+record exchange buffer.
+
+BAR0 contains the programming interface consisting of just two
+64-bit registers. The two registers are an ACTION (cmd) and a
+VALUE (data). All ERST actions/operations/side effects happen
+on the write to the ACTION, by design. Thus any data needed
+by the action must be placed into VALUE prior to writing
+ACTION. Reading the VALUE simply returns the register contents,
+which can be updated by a previous ACTION. This behavior is
+encoded in the ACPI ERST table generated by QEMU.
+
+BAR1 contains the record exchange buffer, and the size of this
+buffer sets the maximum record size. This record exchange
+buffer size is 8KiB.
+
+Backing File
+------------
+
+The ACPI ERST persistent storage is contained within a single backing
+file. The size and location of the backing file is specified upon
+QEMU startup of the ACPI ERST device.
+
+Records are stored in the backing file in a simple fashion.
+The backing file is essentially divided into fixed size
+"slots", ERST_RECORD_SIZE in length, with each "slot"
+storing a single record. No attempt at optimizing storage
+through compression, compaction, etc is attempted.
+NOTE that any change to this value will make any pre-
+existing backing files, not of the same ERST_RECORD_SIZE,
+unusable to the guest.
+
+Below is an example layout of the backing store file.
+The size of the file is a multiple of ERST_RECORD_SIZE,
+and contains N number of "slots" to store records. The
+example below shows two records (in CPER format) in the
+backing file, while the remaining slots are empty/
+available.
+
+ Slot   Record
+        +--------------------------------------------+
+    0   | empty/available                            |
+        +--------------------------------------------+
+    1   | CPER                                       |
+        +--------------------------------------------+
+    2   | CPER                                       |
+        +--------------------------------------------+
+ ...   |                                            |
+        +--------------------------------------------+
+    N   | empty/available                            |
+        +--------------------------------------------+
+        <-------------- ERST_RECORD_SIZE ------------>
+
+Not all slots need to be occupied, and they need not be
+occupied in a contiguous fashion. The ability to clear/erase
+specific records allows for the formation of unoccupied
+slots.
+
+
+References
+----------
+
+[1] "Advanced Configuration and Power Interface Specification",
+    version 4.0, June 2009.
+
+[2] "Unified Extensible Firmware Interface Specification",
+    version 2.1, October 2008.
+
--
1.8.3.1

From:	Eric DeVolder
Subject:	Re: [PATCH v5 02/10] ACPI ERST: specification for ERST support
Date:	Wed, 30 Jun 2021 19:26:39 +0000