[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers |
Date: |
Thu, 24 Jun 2021 18:16:53 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0 |
On 6/24/21 6:01 PM, Philippe Mathieu-Daudé wrote:
> On 6/24/21 5:46 PM, Philippe Mathieu-Daudé wrote:
>> Hi Zoltan,
>>
>> On 2/21/21 3:34 PM, Philippe Mathieu-Daudé wrote:
>>> From: BALATON Zoltan <balaton@eik.bme.hu>
>>>
>>> The base address of the SMBus io ports and its enabled status is set
>>> by registers in the PCI config space but this was not correctly
>>> emulated. Instead the SMBus registers were mapped on realize to the
>>> base address set by a property to the address expected by fuloong2e
>>> firmware.
>>>
>>> Fix the base and config register handling to more closely model
>>> hardware which allows to remove the property and allows the guest to
>>> control this mapping. Do all this in reset instead of realize so it's
>>> correctly updated on reset.
>>
>> This commit broken running PMON on Fuloong2E:
>> https://www.mail-archive.com/qemu-devel@nongnu.org/msg752605.html
>> console: PMON2000 MIPS Initializing. Standby...
>> console: ERRORPC=00000000 CONFIG=00030932
>> console: PRID=00006302
>> console: DIMM read
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> console: 000000ff
>> ...
>>
>> From here the console loops displaying this value...
>
> Tracing:
>
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80490
> value 0xeee1 size 4
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe804d2
> value 0x1 size 2
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80404
> value 0x1 size 1
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80004
> value 0x7 size 4
> mr_ops_read mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80081
> value 0x0 size 1
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80081
> value 0x80 size 1
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80083
> value 0x89 size 1
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80085
> value 0x3 size 1
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe8005a
> value 0x7 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0x3f0 value 0xe2 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0x3f0 value 0xe3 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0x3f0 value 0xe6 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0x3f0 value 0xe7 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0x3f0 value 0xe8 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0x3f0 value 0xee size 1
> mr_ops_write mr 0x5583912b2e00 (south-bridge-pci-config) addr 0x1fe80085
> value 0x1 size 1
These are:
pci_cfg_write vt82c686b-pm 05:4 @0x90 <- 0xeee1
pci_cfg_write vt82c686b-pm 05:4 @0xd0 <- 0x1
pci_cfg_write vt82c686b-pm 05:4 @0x4 <- 0x1
pci_cfg_write vt82c686b-isa 05:0 @0x4 <- 0x7
pci_cfg_read vt82c686b-isa 05:0 @0x80 -> 0x0
pci_cfg_write vt82c686b-isa 05:0 @0x80 <- 0x80
pci_cfg_write vt82c686b-isa 05:0 @0x80 <- 0x89
pci_cfg_write vt82c686b-isa 05:0 @0x84 <- 0x3
pci_cfg_write vt82c686b-isa 05:0 @0x58 <- 0x7
pci_cfg_write vt82c686b-isa 05:0 @0x84 <- 0x1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0xeee4 value 0xa1 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0xeee3 value 0x0 size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0xeee2 value 0x8 size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0xeee0 value 0x1f size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee2 value 0xffffffffffffffff
> size 1
> mr_ops_write mr 0x558390ff4d00 (io) addr 0xeee2 value 0xff size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
> mr_ops_read mr 0x558390ff4d00 (io) addr 0xeee0 value 0xffffffffffffffff
> size 1
>
>> Expected:
>>
>> console: PMON2000 MIPS Initializing. Standby...
>> console: ERRORPC=00000000 CONFIG=00030932
>> console: PRID=00006302
>> console: DIMM read
>> console: 00000080
>> console: read memory type
>> console: read number of rows
>> ...
>>
>>> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
>>> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
>>> Message-Id:
>>> <f2ca2ad5f08ba8cee07afd9d67b4e75cda21db09.1610223397.git.balaton@eik.bme.hu>
>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>> ---
>>> hw/isa/vt82c686.c | 49 +++++++++++++++++++++++++++++++++------------
>>> hw/mips/fuloong2e.c | 4 +---
>>> 2 files changed, 37 insertions(+), 16 deletions(-)
>>>
>>> diff --git a/hw/isa/vt82c686.c b/hw/isa/vt82c686.c
>>> index fe8961b0573..9c4d1530225 100644
>>> --- a/hw/isa/vt82c686.c
>>> +++ b/hw/isa/vt82c686.c
>>> @@ -22,6 +22,7 @@
>>> #include "hw/i2c/pm_smbus.h"
>>> #include "qapi/error.h"
>>> #include "qemu/module.h"
>>> +#include "qemu/range.h"
>>> #include "qemu/timer.h"
>>> #include "exec/address-spaces.h"
>>> #include "trace.h"
>>> @@ -34,7 +35,6 @@ struct VT686PMState {
>>> ACPIREGS ar;
>>> APMState apm;
>>> PMSMBus smb;
>>> - uint32_t smb_io_base;
>>> };
>>>
>>> static void pm_io_space_update(VT686PMState *s)
>>> @@ -50,11 +50,22 @@ static void pm_io_space_update(VT686PMState *s)
>>> memory_region_transaction_commit();
>>> }
>>>
>>> +static void smb_io_space_update(VT686PMState *s)
>>> +{
>>> + uint32_t smbase = pci_get_long(s->dev.config + 0x90) & 0xfff0UL;
>>> +
>>> + memory_region_transaction_begin();
>>> + memory_region_set_address(&s->smb.io, smbase);
>>> + memory_region_set_enabled(&s->smb.io, s->dev.config[0xd2] & BIT(0));
>>> + memory_region_transaction_commit();
>>> +}
>>> +
>>> static int vmstate_acpi_post_load(void *opaque, int version_id)
>>> {
>>> VT686PMState *s = opaque;
>>>
>>> pm_io_space_update(s);
>>> + smb_io_space_update(s);
>>> return 0;
>>> }
>>>
>>> @@ -77,8 +88,18 @@ static const VMStateDescription vmstate_acpi = {
>>>
>>> static void pm_write_config(PCIDevice *d, uint32_t addr, uint32_t val, int
>>> len)
>>> {
>>> + VT686PMState *s = VT82C686B_PM(d);
>>> +
>>> trace_via_pm_write(addr, val, len);
>>> pci_default_write_config(d, addr, val, len);
>>> + if (ranges_overlap(addr, len, 0x90, 4)) {
>>> + uint32_t v = pci_get_long(s->dev.config + 0x90);
>>> + pci_set_long(s->dev.config + 0x90, (v & 0xfff0UL) | 1);
>>> + }
>>> + if (range_covers_byte(addr, len, 0xd2)) {
>>> + s->dev.config[0xd2] &= 0xf;
>>> + smb_io_space_update(s);
>>> + }
>>> }
>>>
>>> static void pm_update_sci(VT686PMState *s)
>>> @@ -103,6 +124,17 @@ static void pm_tmr_timer(ACPIREGS *ar)
>>> pm_update_sci(s);
>>> }
>>>
>>> +static void vt82c686b_pm_reset(DeviceState *d)
>>> +{
>>> + VT686PMState *s = VT82C686B_PM(d);
>>> +
>>> + /* SMBus IO base */
>>> + pci_set_long(s->dev.config + 0x90, 1);
>>> + s->dev.config[0xd2] = 0;
>>> +
>>> + smb_io_space_update(s);
>>> +}
>>> +
>>> static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
>>> {
>>> VT686PMState *s = VT82C686B_PM(dev);
>>> @@ -116,13 +148,9 @@ static void vt82c686b_pm_realize(PCIDevice *dev, Error
>>> **errp)
>>> /* 0x48-0x4B is Power Management I/O Base */
>>> pci_set_long(pci_conf + 0x48, 0x00000001);
>>>
>>> - /* SMB ports:0xeee0~0xeeef */
>>> - s->smb_io_base = ((s->smb_io_base & 0xfff0) + 0x0);
>>> - pci_conf[0x90] = s->smb_io_base | 1;
>>> - pci_conf[0x91] = s->smb_io_base >> 8;
>>> - pci_conf[0xd2] = 0x90;
>>> pm_smbus_init(DEVICE(s), &s->smb, false);
>>> - memory_region_add_subregion(get_system_io(), s->smb_io_base,
>>> &s->smb.io);
>>> + memory_region_add_subregion(pci_address_space_io(dev), 0, &s->smb.io);
>>> + memory_region_set_enabled(&s->smb.io, false);
>>>
>>> apm_init(dev, &s->apm, NULL, s);
>>>
>>> @@ -135,11 +163,6 @@ static void vt82c686b_pm_realize(PCIDevice *dev, Error
>>> **errp)
>>> acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
>>> }
>>>
>>> -static Property via_pm_properties[] = {
>>> - DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
>>> - DEFINE_PROP_END_OF_LIST(),
>>> -};
>>> -
>>> static void via_pm_class_init(ObjectClass *klass, void *data)
>>> {
>>> DeviceClass *dc = DEVICE_CLASS(klass);
>>> @@ -151,10 +174,10 @@ static void via_pm_class_init(ObjectClass *klass,
>>> void *data)
>>> k->device_id = PCI_DEVICE_ID_VIA_ACPI;
>>> k->class_id = PCI_CLASS_BRIDGE_OTHER;
>>> k->revision = 0x40;
>>> + dc->reset = vt82c686b_pm_reset;
>>> dc->desc = "PM";
>>> dc->vmsd = &vmstate_acpi;
>>> set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
>>> - device_class_set_props(dc, via_pm_properties);
>>> }
>>>
>>> static const TypeInfo via_pm_info = {
>>> diff --git a/hw/mips/fuloong2e.c b/hw/mips/fuloong2e.c
>>> index 1f3680fda3e..94f4718147f 100644
>>> --- a/hw/mips/fuloong2e.c
>>> +++ b/hw/mips/fuloong2e.c
>>> @@ -230,9 +230,7 @@ static void vt82c686b_southbridge_init(PCIBus *pci_bus,
>>> int slot, qemu_irq intc,
>>> pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci");
>>> pci_create_simple(pci_bus, PCI_DEVFN(slot, 3), "vt82c686b-usb-uhci");
>>>
>>> - dev = pci_new(PCI_DEVFN(slot, 4), TYPE_VT82C686B_PM);
>>> - qdev_prop_set_uint32(DEVICE(dev), "smb_io_base", 0xeee1);
>>> - pci_realize_and_unref(dev, pci_bus, &error_fatal);
>>> + dev = pci_create_simple(pci_bus, PCI_DEVFN(slot, 4),
>>> TYPE_VT82C686B_PM);
>>> *i2c_bus = I2C_BUS(qdev_get_child_bus(DEVICE(dev), "i2c"));
>>>
>>> /* Audio support */
>>>
>>
>>
>
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers,
Philippe Mathieu-Daudé <=
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, BALATON Zoltan, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, BALATON Zoltan, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, BALATON Zoltan, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
- Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, Philippe Mathieu-Daudé, 2021/06/24
Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, BALATON Zoltan, 2021/06/24
Re: [PULL 30/43] vt82c686: Fix SMBus IO base and configuration registers, BALATON Zoltan, 2021/06/24