qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 2/7] net/vmnet: add new netdevs to qapi/net


From: Vladislav Yaroshchuk
Subject: [PATCH 2/7] net/vmnet: add new netdevs to qapi/net
Date: Thu, 17 Jun 2021 17:32:41 +0300

Created separate netdev per each vmnet operating mode
because they use quite different settings. Especially since
macOS 11.0 (vmnet.framework API gets lots of updates)

Three new netdevs are added:
- vmnet-host
- vmnet-shared
- vmnet-bridged

Signed-off-by: Vladislav Yaroshchuk <yaroshchuk2000@gmail.com>
---
 net/clients.h |  11 +++++-
 net/net.c     |  10 +++--
 net/vmnet.c   |  14 ++++++-
 qapi/net.json | 100 ++++++++++++++++++++++++++++++++++++++++++++++++--
 4 files changed, 126 insertions(+), 9 deletions(-)

diff --git a/net/clients.h b/net/clients.h
index ac19843aab..c9157789f2 100644
--- a/net/clients.h
+++ b/net/clients.h
@@ -64,7 +64,14 @@ int net_init_vhost_user(const Netdev *netdev, const char 
*name,
 int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
                         NetClientState *peer, Error **errp);
 #ifdef CONFIG_VMNET
-int net_init_vmnet(const Netdev *netdev, const char *name,
+int net_init_vmnet_host(const Netdev *netdev, const char *name,
                           NetClientState *peer, Error **errp);
-#endif
+
+int net_init_vmnet_shared(const Netdev *netdev, const char *name,
+                          NetClientState *peer, Error **errp);
+
+int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
+                          NetClientState *peer, Error **errp);
+#endif /* CONFIG_VMNET */
+
 #endif /* QEMU_NET_CLIENTS_H */
diff --git a/net/net.c b/net/net.c
index 645c52ef6e..87a6f96665 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1002,8 +1002,10 @@ static int (* const 
net_client_init_fun[NET_CLIENT_DRIVER__MAX])(
         [NET_CLIENT_DRIVER_L2TPV3]    = net_init_l2tpv3,
 #endif
 #ifdef CONFIG_VMNET
-        [NET_CLIENT_DRIVER_VMNET] = net_init_vmnet,
-#endif
+        [NET_CLIENT_DRIVER_VMNET_HOST] = net_init_vmnet_host,
+        [NET_CLIENT_DRIVER_VMNET_SHARED] = net_init_vmnet_shared,
+        [NET_CLIENT_DRIVER_VMNET_BRIDGED] = net_init_vmnet_bridged,
+#endif /* CONFIG_VMNET */
 };
 
 
@@ -1091,7 +1093,9 @@ void show_netdevs(void)
         "vhost-vdpa",
 #endif
 #ifdef CONFIG_VMNET
-        "vmnet",
+        "vmnet-host",
+        "vmnet-shared",
+        "vmnet-bridged",
 #endif
     };
 
diff --git a/net/vmnet.c b/net/vmnet.c
index f8b64e2a27..3f25afd7e8 100644
--- a/net/vmnet.c
+++ b/net/vmnet.c
@@ -15,7 +15,19 @@
 
 #include <vmnet/vmnet.h>
 
-int net_init_vmnet(const Netdev *netdev, const char *name,
+int net_init_vmnet_host(const Netdev *netdev, const char *name,
+                    NetClientState *peer, Error **errp) {
+  error_setg(errp, "vmnet is not implemented yet");
+  return -1;
+}
+
+int net_init_vmnet_shared(const Netdev *netdev, const char *name,
+                    NetClientState *peer, Error **errp) {
+  error_setg(errp, "vmnet is not implemented yet");
+  return -1;
+}
+
+int net_init_vmnet_bridged(const Netdev *netdev, const char *name,
                     NetClientState *peer, Error **errp) {
   error_setg(errp, "vmnet is not implemented yet");
   return -1;
diff --git a/qapi/net.json b/qapi/net.json
index c5de234e2c..a548d7a7f4 100644
--- a/qapi/net.json
+++ b/qapi/net.json
@@ -452,6 +452,89 @@
     '*vhostdev':     'str',
     '*queues':       'int' } }
 
+##
+# @NetdevVmnetHostOptions:
+#
+# vmnet (host mode) network backend.
+#
+# Allows the vmnet interface to communicate with
+# other vmnet interfaces that are in host mode and also with the native host.
+#
+# @dhcpstart: The starting IPv4 address to use for the interface. Must be in 
the
+#             private IP range (RFC 1918). Must be specified along
+#             with @dhcpend and @subnetmask.
+#             This address is used as the gateway address. The subsequent 
address
+#             up to and including dhcpend are  placed in the DHCP pool.
+#
+# @dhcpend: The DHCP IPv4 range end address to use for the interface. Must be 
in
+#           the private IP range (RFC 1918). Must be specified along
+#           with @dhcpstart and @subnetmask.
+#
+# @subnetmask: The IPv4 subnet mask to use on the interface. Must be specified
+#              along with @dhcpstart and @subnetmask.
+#
+#
+# Since: 6.1,
+##
+{ 'struct': 'NetdevVmnetHostOptions',
+  'data': {
+    '*dhcpstart':   'str',
+    '*dhcpend':     'str',
+    '*subnetmask':  'str'
+  },
+  'if': 'defined(CONFIG_VMNET)' }
+
+##
+# @NetdevVmnetSharedOptions:
+#
+# vmnet (shared mode) network backend.
+#
+# Allows traffic originating from the vmnet interface to reach the
+# Internet through a network address translator (NAT). The vmnet interface
+# can also communicate with the native host. By default, the vmnet interface
+# is able to communicate with other shared mode interfaces. If a subnet range
+# is specified, the vmnet interface can communicate with other shared mode
+# interfaces on the same subnet.
+#
+# @dhcpstart: The starting IPv4 address to use for the interface. Must be in 
the
+#             private IP range (RFC 1918). Must be specified along
+#             with @dhcpend and @subnetmask.
+#             This address is used as the gateway address. The subsequent 
address
+#             up to and including dhcpend are  placed in the DHCP pool.
+#
+# @dhcpend: The DHCP IPv4 range end address to use for the interface. Must be 
in
+#           the private IP range (RFC 1918). Must be specified along
+#           with @dhcpstart and @subnetmask.
+#
+# @subnetmask: The IPv4 subnet mask to use on the interface. Must be specified
+#              along with @dhcpstart and @subnetmask.
+#
+#
+# Since: 6.1,
+##
+{ 'struct': 'NetdevVmnetSharedOptions',
+  'data': {
+    '*dhcpstart':    'str',
+    '*dhcpend':      'str',
+    '*subnetmask':   'str'
+  },
+  'if': 'defined(CONFIG_VMNET)' }
+
+##
+# @NetdevVmnetBridgedOptions:
+#
+# vmnet (bridged mode) network backend.
+#
+# Bridges the vmnet interface with a physical network interface.
+#
+# @ifname: The name of the physical interface to be bridged.
+#
+# Since: 6.1
+##
+{ 'struct': 'NetdevVmnetBridgedOptions',
+  'data': { 'ifname': 'str' },
+  'if': 'defined(CONFIG_VMNET)' }
+
 ##
 # @NetClientDriver:
 #
@@ -460,11 +543,16 @@
 # Since: 2.7
 #
 #        @vhost-vdpa since 5.1
-#        @vmnet since 6.1
+#        @vmnet-host since 6.1
+#        @vmnet-shared since 6.1
+#        @vmnet-bridged since 6.1
 ##
 { 'enum': 'NetClientDriver',
   'data': [ 'none', 'nic', 'user', 'tap', 'l2tpv3', 'socket', 'vde',
-            'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa', 'vmnet' 
] }
+            'bridge', 'hubport', 'netmap', 'vhost-user', 'vhost-vdpa',
+            { 'name': 'vmnet-host', 'if': 'defined(CONFIG_VMNET)' },
+            { 'name': 'vmnet-shared', 'if': 'defined(CONFIG_VMNET)' },
+            { 'name': 'vmnet-bridged', 'if': 'defined(CONFIG_VMNET)' }] }
 
 ##
 # @Netdev:
@@ -478,6 +566,9 @@
 # Since: 1.2
 #
 #        'l2tpv3' - since 2.1
+#        'vmnet-host' - since 6.1
+#        'vmnet-shared' - since 6.1
+#        'vmnet-bridged' - since 6.1
 ##
 { 'union': 'Netdev',
   'base': { 'id': 'str', 'type': 'NetClientDriver' },
@@ -493,7 +584,10 @@
     'hubport':  'NetdevHubPortOptions',
     'netmap':   'NetdevNetmapOptions',
     'vhost-user': 'NetdevVhostUserOptions',
-    'vhost-vdpa': 'NetdevVhostVDPAOptions' } }
+    'vhost-vdpa': 'NetdevVhostVDPAOptions',
+    'vmnet-host': 'NetdevVmnetHostOptions',
+    'vmnet-shared': 'NetdevVmnetSharedOptions',
+    'vmnet-bridged': 'NetdevVmnetBridgedOptions' } }
 
 ##
 # @RxState:
-- 
2.23.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]