qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v4 0/8] IOMMU: Add support for IOMMU Bypass Feature


From: Igor Mammedov
Subject: Re: [PATCH v4 0/8] IOMMU: Add support for IOMMU Bypass Feature
Date: Sat, 5 Jun 2021 14:32:38 +0200

On Tue, 25 May 2021 03:49:57 +0000
Wang Xingang <wangxingang5@huawei.com> wrote:

> From: Xingang Wang <wangxingang5@huawei.com>
> 
> These patches add support for configure bypass_iommu on/off for
> pci root bus, including primary bus and pxb root bus. At present,
> all root bus will go through iommu when iommu is configured,
> which is not flexible, because in many situations the need for using
> iommu and bypass iommu aften exists at the same time.

'many situations' doesn't describe why bypass is needed,
can you provide a use-cases here and what are security implications
when bypass is allowed.
(PS: the later probably should be documented somewhere in the docs/option 
description)
 
> So this add option to enable/disable bypass_iommu for primary bus
> and pxb root bus. The bypass_iommu property is set to false default,
> meaning that devcies will go through iommu if no explicit configuration
> is added. When bypass_iommu is enabled for the root bus, devices
> attached to it will bypass iommu, otherwise devices will go through
> iommu.
> 
> This feature can be used in this manner:
> arm: -machine virt,iommu=smmuv3,bypass_iommu=true
> x86: -machine q35,bypass_iommu=true
> pxb: -device pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,bypass_iommu=true 
> 
> History:
> 
> v3 -> v4:
> - simplify the logic in building the IORT idmap
> 
> v2 -> v3:
> - rebase on top of v6.0.0-rc4
> - Took into account Eric's comments, replace with a bypass_iommu
>   proerty 
> - When building the IORT idmap, cover the whole RID space
> 
> v1 -> v2:
> - rebase on top of v6.0.0-rc0
> - Fix some issues
> - Took into account Eric's comments, and remove the PCI_BUS_IOMMU flag,
>   replace it with a property in PCIHostState.
> - Add support for x86 iommu option
> 
> Xingang Wang (8):
>   hw/pci/pci_host: Allow bypass iommu for pci host
>   hw/pxb: Add a bypass iommu property
>   hw/arm/virt: Add a machine option to bypass iommu for primary bus
>   hw/i386: Add a pc machine option to bypass iommu for primary bus
>   hw/pci: Add pci_bus_range to get bus number range
>   hw/arm/virt-acpi-build: Add explicit IORT idmap for smmuv3 node
>   hw/i386/acpi-build: Add explicit scope in DMAR table
>   hw/i386/acpi-build: Add bypass_iommu check when building IVRS table
> 
>  hw/arm/virt-acpi-build.c            | 135 ++++++++++++++++++++++++----
>  hw/arm/virt.c                       |  26 ++++++
>  hw/i386/acpi-build.c                |  70 ++++++++++++++-
>  hw/i386/pc.c                        |  18 ++++
>  hw/pci-bridge/pci_expander_bridge.c |   3 +
>  hw/pci-host/q35.c                   |   1 +
>  hw/pci/pci.c                        |  33 ++++++-
>  hw/pci/pci_host.c                   |   2 +
>  include/hw/arm/virt.h               |   1 +
>  include/hw/i386/pc.h                |   1 +
>  include/hw/pci/pci.h                |   2 +
>  include/hw/pci/pci_host.h           |   1 +
>  12 files changed, 270 insertions(+), 23 deletions(-)
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]