[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC] Adding the A64FX's HPC funtions.
From: |
Peter Maydell |
Subject: |
Re: [RFC] Adding the A64FX's HPC funtions. |
Date: |
Fri, 4 Jun 2021 10:00:07 +0100 |
On Fri, 4 Jun 2021 at 09:29, ishii.shuuichir@fujitsu.com
<ishii.shuuichir@fujitsu.com> wrote:
>
> Hi, Richard.
>
> > Well, Peter disagreed with having them enabled by default in -cpu max, so we
> > might need at least one extra property. I see no reason to have three
> > properties -- one property a64fx-hpc should be sufficient. But we might not
> > want any command-line properties, see below...
>
> I understood.
>
> > For comparison, in the Arm Cortex-A76 manual,
> > https://developer.arm.com/documentation/100798/0301/
> > section B2.4 "AArch64 registers by functional group", there is a concise
> > listing of all of the system registers and their reset values.
>
> Thank you for the information.
>
> > The most important of these for QEMU to create '-cpu a64fx' are the
> > ID_AA64{ISAR,MMFR,PFR} and MIDR values. These values determine all of
> > the
> > standard architectural features,
>
> The values of ID_AA64{ISAR,MMFR,PFR} and MIDR are not listed in the
> specifications published at this time.
> Of course, they are listed in the A64FX specification document managed within
> Fujitsu,
> but we cannot tell how far these setting values can be disclosed
> without checking with the A64FX specification staff within Fujitsu.
If somebody has access to A64 hardware they could write a minor kernel
patch to just print the values...
-- PMM