This series enable shadow virtqueue for vhost-vdpa devices. This is a
new method of vhost devices migration: Instead of relay on vhost
device's dirty logging capability, SW assisted LM intercepts dataplane,
forwarding the descriptors between VM and device. Is intended for vDPA
devices with no dirty memory tracking capabilities.
In this migration mode, qemu offers a new vring to the device to
read and write into, and disable vhost notifiers, processing guest and
vhost notifications in qemu. On used buffer relay, qemu will mark the
dirty memory as with plain virtio-net devices. This way, devices does
not need to have dirty page logging capability.
This series is a POC doing SW LM for vhost-net and vhost-vdpa devices.
The former already have dirty page logging capabilities, but it is both
easier to test and uses different code paths in qemu.
For qemu to use shadow virtqueues the vhost-net devices need to be
instantiated:
* With IOMMU (iommu_platform=on,ats=on)
* Without event_idx (event_idx=off)
And shadow virtqueue needs to be enabled for them with QMP command
like:
{ "execute": "x-vhost-enable-shadow-vq",
"arguments": { "name": "dev0", "enable": true } }
The series includes some commits to delete in the final version. One
of them is the one that adds vhost_kernel_vring_pause to vhost kernel
devices. This is only intended to work with vhost-net devices, as a way
to test the solution, so don't use any other vhost kernel device in the
same test.
The vhost-vdpa devices should work the same way. However, vp_vdpa is
not working properly with intel iommu unmapping, so this series add two
extra commits to allow testing the solution enable SVQ mode from the
device start and forbidding any other vhost-vdpa memory mapping. The
causes of this are still under debugging.
For testing vhost-vdpa devices vp_vdpa device has been used with nested
virtualization, using a qemu virtio-net device in L0. To be able to
stop and reset status, features in RFC status has been implemented in
commits 5 and 6. After that, virtio-net driver in L0 guest is replaced
by vp_vdpa driver, and a nested qemu instance is launched using it.
This vp_vdpa driver needs to be also modified to support the RFCs,
mainly allowing it to removing the _S_STOPPED status flag and
implementing actual vp_vdpa_set_vq_state and vp_vdpa_get_vq_state
callbacks.
Just the notification forwarding (with no descriptor relay) can be
achieved with patches 7 and 8, and starting SVQ. Previous commits
are cleanup ones and declaration of QMP command.
Commit 17 introduces the buffer forwarding. Previous one are for
preparations again, and laters are for enabling some obvious
optimizations. However, it needs the vdpa device to be able to map
every IOVA space, and some vDPA devices are not able to do so. Checking
of this is added in previous commits.
Later commits allow vhost and shadow virtqueue to track and translate
between qemu virtual addresses and a restricted iommu range. At the
moment is not able to delete old translations, limit maximum range
it can translate, nor vhost add new memory regions from the moment
SVQ is enabled, but is somehow straightforward to add these.
This is a big series, so the idea is to send it in logical chunks once
all comments have been collected. As a first complete usecase, a SVQ
mode with no possibility of going back to regular mode would cover a
first usecase, and this RFC already have all the ingredients but
internal memory tracking.
It is based on the ideas of DPDK SW assisted LM, in the series of
DPDK's https://patchwork.dpdk.org/cover/48370/ . However, these does
not map the shadow vq in guest's VA, but in qemu's.
Comments are welcome!
TODO:
* Event, indirect, packed, and others features of virtio - Waiting for
confirmation of the big picture.
* vDPA devices: Grow IOVA tree to track new or deleted memory. Cap
IOVA limit in tree so it cannot grow forever.
* To sepparate buffers forwarding in its own AIO context, so we can
throw more threads to that task and we don't need to stop the main
event loop.
* IOMMU optimizations, so bacthing and bigger chunks of IOVA can be
sent to device.
* Automatic kick-in on live-migration.
* Proper documentation.
Thanks!
Changes from v2 RFC:
* Adding vhost-vdpa devices support
* Fixed some memory leaks pointed by different comments
Changes from v1 RFC:
* Use QMP instead of migration to start SVQ mode.
* Only accepting IOMMU devices, closer behavior with target devices
(vDPA)
* Fix invalid masking/unmasking of vhost call fd.
* Use of proper methods for synchronization.
* No need to modify VirtIO device code, all of the changes are
contained in vhost code.
* Delete superfluous code.
* An intermediate RFC was sent with only the notifications forwarding
changes. It can be seen in
https://patchew.org/QEMU/20210129205415.876290-1-eperezma@redhat.com/
* v1 at
https://lists.gnu.org/archive/html/qemu-devel/2020-11/msg05372.html
Eugenio Pérez (29):
virtio: Add virtio_queue_is_host_notifier_enabled
vhost: Save masked_notifier state
vhost: Add VhostShadowVirtqueue
vhost: Add x-vhost-enable-shadow-vq qmp
virtio: Add VIRTIO_F_QUEUE_STATE
virtio-net: Honor VIRTIO_CONFIG_S_DEVICE_STOPPED
vhost: Route guest->host notification through shadow virtqueue
vhost: Route host->guest notification through shadow virtqueue
vhost: Avoid re-set masked notifier in shadow vq
virtio: Add vhost_shadow_vq_get_vring_addr
vhost: Add vhost_vring_pause operation
vhost: add vhost_kernel_vring_pause
vhost: Add vhost_get_iova_range operation
vhost: add vhost_has_limited_iova_range
vhost: Add enable_custom_iommu to VhostOps
vhost-vdpa: Add vhost_vdpa_enable_custom_iommu
vhost: Shadow virtqueue buffers forwarding
vhost: Use vhost_enable_custom_iommu to unmap everything if available
vhost: Check for device VRING_USED_F_NO_NOTIFY at shadow virtqueue
kick
vhost: Use VRING_AVAIL_F_NO_INTERRUPT at device call on shadow
virtqueue
vhost: Add VhostIOVATree
vhost: Add iova_rev_maps_find_iova to IOVAReverseMaps
vhost: Use a tree to store memory mappings
vhost: Add iova_rev_maps_alloc
vhost: Add custom IOTLB translations to SVQ
vhost: Map in vdpa-dev
vhost-vdpa: Implement vhost_vdpa_vring_pause operation
vhost-vdpa: never map with vDPA listener
vhost: Start vhost-vdpa SVQ directly
qapi/net.json | 22 +
hw/virtio/vhost-iova-tree.h | 61 ++
hw/virtio/vhost-shadow-virtqueue.h | 38 ++
hw/virtio/virtio-pci.h | 1 +
include/hw/virtio/vhost-backend.h | 16 +
include/hw/virtio/vhost-vdpa.h | 2 +-
include/hw/virtio/vhost.h | 14 +
include/hw/virtio/virtio.h | 5 +-
.../standard-headers/linux/virtio_config.h | 5 +
include/standard-headers/linux/virtio_pci.h | 2 +
hw/net/virtio-net.c | 4 +-
hw/virtio/vhost-backend.c | 42 ++
hw/virtio/vhost-iova-tree.c | 283 ++++++++
hw/virtio/vhost-shadow-virtqueue.c | 643 ++++++++++++++++++
hw/virtio/vhost-vdpa.c | 73 +-
hw/virtio/vhost.c | 459 ++++++++++++-
hw/virtio/virtio-pci.c | 9 +
hw/virtio/virtio.c | 5 +
hw/virtio/meson.build | 2 +-
hw/virtio/trace-events | 1 +
20 files changed, 1663 insertions(+), 24 deletions(-)
create mode 100644 hw/virtio/vhost-iova-tree.h
create mode 100644 hw/virtio/vhost-shadow-virtqueue.h
create mode 100644 hw/virtio/vhost-iova-tree.c
create mode 100644 hw/virtio/vhost-shadow-virtqueue.c