[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 1/5] hw/virtio: add boilerplate for vhost-user-i2c device
From: |
Alex Bennée |
Subject: |
Re: [PATCH 1/5] hw/virtio: add boilerplate for vhost-user-i2c device |
Date: |
Mon, 29 Mar 2021 16:13:27 +0100 |
User-agent: |
mu4e 1.5.11; emacs 28.0.50 |
Viresh Kumar <viresh.kumar@linaro.org> writes:
> This creates the QEMU side of the vhost-user-i2c device which connects
> to the remote daemon. It is based of vhost-user-fs code.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> hw/virtio/Kconfig | 5 +
> hw/virtio/meson.build | 1 +
> hw/virtio/vhost-user-i2c.c | 286 ++++++++++++++++++++
> include/hw/virtio/vhost-user-i2c.h | 37 +++
> include/standard-headers/linux/virtio_ids.h | 1 +
> 5 files changed, 330 insertions(+)
> create mode 100644 hw/virtio/vhost-user-i2c.c
> create mode 100644 include/hw/virtio/vhost-user-i2c.h
>
> diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
> index 0eda25c4e1bf..35ab45e2095c 100644
> --- a/hw/virtio/Kconfig
> +++ b/hw/virtio/Kconfig
> @@ -58,3 +58,8 @@ config VIRTIO_MEM
> depends on LINUX
> depends on VIRTIO_MEM_SUPPORTED
> select MEM_DEVICE
> +
> +config VHOST_USER_I2C
> + bool
> + default y
> + depends on VIRTIO && VHOST_USER
> diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
> index fbff9bc9d4de..1a0d736a0db5 100644
> --- a/hw/virtio/meson.build
> +++ b/hw/virtio/meson.build
> @@ -25,6 +25,7 @@ virtio_ss.add(when: 'CONFIG_VHOST_USER_VSOCK', if_true:
> files('vhost-user-vsock.
> virtio_ss.add(when: 'CONFIG_VIRTIO_RNG', if_true: files('virtio-rng.c'))
> virtio_ss.add(when: 'CONFIG_VIRTIO_IOMMU', if_true: files('virtio-iommu.c'))
> virtio_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem.c'))
> +virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true:
> files('vhost-user-i2c.c'))
>
> virtio_pci_ss = ss.source_set()
> virtio_pci_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true:
> files('vhost-vsock-pci.c'))
> diff --git a/hw/virtio/vhost-user-i2c.c b/hw/virtio/vhost-user-i2c.c
> new file mode 100644
> index 000000000000..7b0dc24412a4
> --- /dev/null
> +++ b/hw/virtio/vhost-user-i2c.c
> @@ -0,0 +1,286 @@
> +/*
> + * Vhost-user i2c virtio device
> + *
> + * Copyright (c) 2021 Viresh Kumar <viresh.kumar@linaro.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +#include "hw/qdev-properties.h"
> +#include "hw/virtio/virtio-bus.h"
> +#include "hw/virtio/vhost-user-i2c.h"
> +#include "qemu/error-report.h"
> +#include "standard-headers/linux/virtio_ids.h"
> +
> +static void vu_i2c_start(VirtIODevice *vdev)
> +{
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> + BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
> + VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
> + int ret;
> + int i;
> +
> + if (!k->set_guest_notifiers) {
> + error_report("binding does not support guest notifiers");
> + return;
> + }
> +
> + ret = vhost_dev_enable_notifiers(&i2c->vhost_dev, vdev);
> + if (ret < 0) {
> + error_report("Error enabling host notifiers: %d", -ret);
> + return;
> + }
> +
> + ret = k->set_guest_notifiers(qbus->parent, i2c->vhost_dev.nvqs, true);
> + if (ret < 0) {
> + error_report("Error binding guest notifier: %d", -ret);
> + goto err_host_notifiers;
> + }
> +
> + i2c->vhost_dev.acked_features = vdev->guest_features;
> + ret = vhost_dev_start(&i2c->vhost_dev, vdev);
> + if (ret < 0) {
> + error_report("Error starting vhost-user-i2c: %d", -ret);
> + goto err_guest_notifiers;
> + }
> +
> + /*
> + * guest_notifier_mask/pending not used yet, so just unmask
> + * everything here. virtio-pci will do the right thing by
> + * enabling/disabling irqfd.
> + */
> + for (i = 0; i < i2c->vhost_dev.nvqs; i++) {
> + vhost_virtqueue_mask(&i2c->vhost_dev, vdev, i, false);
> + }
> +
> + return;
> +
> +err_guest_notifiers:
> + k->set_guest_notifiers(qbus->parent, i2c->vhost_dev.nvqs, false);
> +err_host_notifiers:
> + vhost_dev_disable_notifiers(&i2c->vhost_dev, vdev);
> +}
> +
> +static void vu_i2c_stop(VirtIODevice *vdev)
> +{
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> + BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
> + VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
> + int ret;
> +
> + if (!k->set_guest_notifiers) {
> + return;
> + }
> +
> + vhost_dev_stop(&i2c->vhost_dev, vdev);
> +
> + ret = k->set_guest_notifiers(qbus->parent, i2c->vhost_dev.nvqs, false);
> + if (ret < 0) {
> + error_report("vhost guest notifier cleanup failed: %d", ret);
> + return;
> + }
> +
> + vhost_dev_disable_notifiers(&i2c->vhost_dev, vdev);
> +}
> +
> +static void vu_i2c_set_status(VirtIODevice *vdev, uint8_t status)
> +{
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> + bool should_start = status & VIRTIO_CONFIG_S_DRIVER_OK;
> +
> + if (!vdev->vm_running) {
> + should_start = false;
> + }
> +
> + if (i2c->vhost_dev.started == should_start) {
> + return;
> + }
> +
> + if (should_start) {
> + vu_i2c_start(vdev);
> + } else {
> + vu_i2c_stop(vdev);
> + }
> +}
> +
> +static uint64_t vu_i2c_get_features(VirtIODevice *vdev,
> + uint64_t requested_features, Error
> **errp)
> +{
> + /* No feature bits used yet */
> + return requested_features;
> +}
> +
> +static void vu_i2c_handle_output(VirtIODevice *vdev, VirtQueue *vq)
> +{
> + /*
> + * Not normally called; it's the daemon that handles the queue;
> + * however virtio's cleanup path can call this.
> + */
> +}
> +
> +static void vu_i2c_guest_notifier_mask(VirtIODevice *vdev, int idx, bool
> mask)
> +{
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> +
> + vhost_virtqueue_mask(&i2c->vhost_dev, vdev, idx, mask);
> +}
> +
> +static bool vu_i2c_guest_notifier_pending(VirtIODevice *vdev, int idx)
> +{
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> +
> + return vhost_virtqueue_pending(&i2c->vhost_dev, idx);
> +}
> +
> +static void do_vhost_user_cleanup(VirtIODevice *vdev, VHostUserI2C *i2c)
> +{
> + vhost_user_cleanup(&i2c->vhost_user);
> + virtio_delete_queue(i2c->req_vq);
> + g_free(i2c->vhost_dev.vqs);
> + virtio_cleanup(vdev);
> + g_free(i2c->vhost_dev.vqs);
This is a double free of the same queue.
> + i2c->vhost_dev.vqs = NULL;
> +}
> +
> +static int vu_i2c_connect(DeviceState *dev)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> +
> + if (i2c->connected) {
> + return 0;
> + }
> + i2c->connected = true;
> +
> + /* restore vhost state */
> + if (virtio_device_started(vdev, vdev->status)) {
> + vu_i2c_start(vdev);
> + }
> +
> + return 0;
> +}
> +
> +static void vu_i2c_disconnect(DeviceState *dev)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> +
> + if (!i2c->connected) {
> + return;
> + }
> + i2c->connected = false;
> +
> + if (i2c->vhost_dev.started) {
> + vu_i2c_stop(vdev);
> + }
> +}
> +
> +static void vu_i2c_event(void *opaque, QEMUChrEvent event)
> +{
> + DeviceState *dev = opaque;
> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> + VHostUserI2C *i2c = VHOST_USER_I2C(vdev);
> +
> + switch (event) {
> + case CHR_EVENT_OPENED:
> + if (vu_i2c_connect(dev) < 0) {
> + qemu_chr_fe_disconnect(&i2c->conf.chardev);
> + return;
> + }
> + break;
> + case CHR_EVENT_CLOSED:
> + vu_i2c_disconnect(dev);
> + break;
> + case CHR_EVENT_BREAK:
> + case CHR_EVENT_MUX_IN:
> + case CHR_EVENT_MUX_OUT:
> + /* Ignore */
> + break;
> + }
> +}
> +
> +static void vu_i2c_device_realize(DeviceState *dev, Error **errp)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> + VHostUserI2C *i2c = VHOST_USER_I2C(dev);
> + int ret;
> +
> + if (!i2c->conf.chardev.chr) {
> + error_setg(errp, "missing chardev");
> + return;
> + }
> +
> + if (!vhost_user_init(&i2c->vhost_user, &i2c->conf.chardev, errp)) {
> + return;
> + }
> +
> + virtio_init(vdev, "vhost-user-i2c", VIRTIO_ID_I2C, 0);
> +
> + i2c->req_vq = virtio_add_queue(vdev, 3, vu_i2c_handle_output);
> + i2c->vhost_dev.nvqs = 1;
> + i2c->vhost_dev.vqs = g_new0(struct vhost_virtqueue, i2c->vhost_dev.nvqs);
> + ret = vhost_dev_init(&i2c->vhost_dev, &i2c->vhost_user,
> + VHOST_BACKEND_TYPE_USER, 0);
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "vhost_dev_init() failed");
> + do_vhost_user_cleanup(vdev, i2c);
> + }
> +
> + qemu_chr_fe_set_handlers(&i2c->conf.chardev, NULL, NULL, vu_i2c_event,
> NULL,
> + dev, NULL, true);
> +}
> +
> +static void vu_i2c_device_unrealize(DeviceState *dev)
> +{
> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> + VHostUserI2C *i2c = VHOST_USER_I2C(dev);
> +
> + /* This will stop vhost backend if appropriate. */
> + vu_i2c_set_status(vdev, 0);
> +
> + vhost_dev_cleanup(&i2c->vhost_dev);
> +
> + do_vhost_user_cleanup(vdev, i2c);
> +}
> +
> +static const VMStateDescription vu_i2c_vmstate = {
> + .name = "vhost-user-i2c",
> + .unmigratable = 1,
> +};
> +
> +static Property vu_i2c_properties[] = {
> + DEFINE_PROP_CHR("chardev", VHostUserI2C, conf.chardev),
> + DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void vu_i2c_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> + VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
> +
> + device_class_set_props(dc, vu_i2c_properties);
> + dc->vmsd = &vu_i2c_vmstate;
> + set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
> + vdc->realize = vu_i2c_device_realize;
> + vdc->unrealize = vu_i2c_device_unrealize;
> + vdc->get_features = vu_i2c_get_features;
> + vdc->set_status = vu_i2c_set_status;
> + vdc->guest_notifier_mask = vu_i2c_guest_notifier_mask;
> + vdc->guest_notifier_pending = vu_i2c_guest_notifier_pending;
> +}
> +
> +static const TypeInfo vu_i2c_info = {
> + .name = TYPE_VHOST_USER_I2C,
> + .parent = TYPE_VIRTIO_DEVICE,
> + .instance_size = sizeof(VHostUserI2C),
> + .class_init = vu_i2c_class_init,
> +};
> +
> +static void vu_i2c_register_types(void)
> +{
> + type_register_static(&vu_i2c_info);
> +}
> +
> +type_init(vu_i2c_register_types)
> diff --git a/include/hw/virtio/vhost-user-i2c.h
> b/include/hw/virtio/vhost-user-i2c.h
> new file mode 100644
> index 000000000000..a5fffcb6096c
> --- /dev/null
> +++ b/include/hw/virtio/vhost-user-i2c.h
> @@ -0,0 +1,37 @@
> +/*
> + * Vhost-user i2c virtio device
> + *
> + * Copyright (c) 2021 Viresh Kumar <viresh.kumar@linaro.org>
> + *
> + * SPDX-License-Identifier: GPL-2.0-or-later
> + */
> +
> +#ifndef _QEMU_VHOST_USER_I2C_H
> +#define _QEMU_VHOST_USER_I2C_H
> +
> +#include "hw/virtio/virtio.h"
> +#include "hw/virtio/vhost.h"
> +#include "hw/virtio/vhost-user.h"
> +#include "chardev/char-fe.h"
> +
> +#define TYPE_VHOST_USER_I2C "vhost-user-i2c-device"
> +OBJECT_DECLARE_SIMPLE_TYPE(VHostUserI2C, VHOST_USER_I2C)
> +
> +typedef struct {
> + CharBackend chardev;
> +} VHostUserI2CConf;
> +
> +struct VHostUserI2C {
> + /*< private >*/
> + VirtIODevice parent;
> + VHostUserI2CConf conf;
> + struct vhost_virtqueue *vhost_vq;
> + struct vhost_dev vhost_dev;
> + VhostUserState vhost_user;
> + VirtQueue *req_vq;
> + bool connected;
> +
> + /*< public >*/
> +};
> +
> +#endif /* _QEMU_VHOST_USER_I2C_H */
> diff --git a/include/standard-headers/linux/virtio_ids.h
> b/include/standard-headers/linux/virtio_ids.h
> index bc1c0621f5ed..aba00c54b9cd 100644
> --- a/include/standard-headers/linux/virtio_ids.h
> +++ b/include/standard-headers/linux/virtio_ids.h
> @@ -54,5 +54,6 @@
> #define VIRTIO_ID_FS 26 /* virtio filesystem */
> #define VIRTIO_ID_PMEM 27 /* virtio pmem */
> #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */
> +#define VIRTIO_ID_I2C 34 /* virtio i2c */
This should come in as a separate patch. Generally I run:
./scripts/update-linux-headers.sh ~/lsrc/linux.git
and tag the patch as (!MERGE) as a place holder until it can get picked
up with one of the regular UAPI updates.
>
> #endif /* _LINUX_VIRTIO_IDS_H */
--
Alex Bennée
- [PATCH 0/5] virtio: Implement generic vhost-user-i2c backend, Viresh Kumar, 2021/03/24
- [PATCH 1/5] hw/virtio: add boilerplate for vhost-user-i2c device, Viresh Kumar, 2021/03/24
- Re: [PATCH 1/5] hw/virtio: add boilerplate for vhost-user-i2c device,
Alex Bennée <=
- [PATCH 2/5] hw/virtio: add vhost-user-i2c-pci boilerplate, Viresh Kumar, 2021/03/24
- [PATCH 3/5] tools/vhost-user-i2c: Add backend driver, Viresh Kumar, 2021/03/24
- Re: [PATCH 3/5] tools/vhost-user-i2c: Add backend driver, Jie Deng, 2021/03/25
- Re: [PATCH 3/5] tools/vhost-user-i2c: Add backend driver, Arnd Bergmann, 2021/03/25