qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[RFC v6 21/38] target/arm: move aarch64_sync_32_to_64 (and vv) to cpu co


From: Claudio Fontana
Subject: [RFC v6 21/38] target/arm: move aarch64_sync_32_to_64 (and vv) to cpu code
Date: Thu, 11 Mar 2021 14:30:09 +0100

and arm_phys_excp_target_el since it is tied up inside the
same #ifdef block.

aarch64_sync_32_to_64 and aarch64_sync_64_to_32 are
mixed in with the TCG helpers, but they shouldn't, as they
are needed for KVM too.

kvm_arch_get_registers()
{
    if (!is_a64(env)) {
        aarch64_sync_64_to_32(env);
    }
    write_kvmstate_to_list(cpu);
    write_list_to_cpustate(cpu);
    ...
}

kvm_arch_put_registers()
{
    if (!is_a64(env)) {
        aarch64_sync_32_to_64(env);
    }
    write_cpustate_to_list(cpu, true);
    write_list_to_kvmstate(cpu, level)
    ...
}

Move to the cpu module.

Signed-off-by: Claudio Fontana <cfontana@suse.de>
---
 target/arm/cpu-sysemu.c | 217 +++++++++++++++++++++++++++++++++++++
 target/arm/cpu-user.c   |  11 ++
 target/arm/tcg/helper.c | 232 +---------------------------------------
 3 files changed, 231 insertions(+), 229 deletions(-)

diff --git a/target/arm/cpu-sysemu.c b/target/arm/cpu-sysemu.c
index 3add2c2439..d510382742 100644
--- a/target/arm/cpu-sysemu.c
+++ b/target/arm/cpu-sysemu.c
@@ -133,3 +133,220 @@ void switch_mode(CPUARMState *env, int mode)
     env->banked_r14[r14_bank_number(old_mode)] = env->regs[14];
     env->regs[14] = env->banked_r14[r14_bank_number(mode)];
 }
+
+
+
+/*
+ * Function used to synchronize QEMU's AArch64 register set with AArch32
+ * register set.  This is necessary when switching between AArch32 and AArch64
+ * execution state.
+ */
+void aarch64_sync_32_to_64(CPUARMState *env)
+{
+    int i;
+    uint32_t mode = env->uncached_cpsr & CPSR_M;
+
+    /* We can blanket copy R[0:7] to X[0:7] */
+    for (i = 0; i < 8; i++) {
+        env->xregs[i] = env->regs[i];
+    }
+
+    /*
+     * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12.
+     * Otherwise, they come from the banked user regs.
+     */
+    if (mode == ARM_CPU_MODE_FIQ) {
+        for (i = 8; i < 13; i++) {
+            env->xregs[i] = env->usr_regs[i - 8];
+        }
+    } else {
+        for (i = 8; i < 13; i++) {
+            env->xregs[i] = env->regs[i];
+        }
+    }
+
+    /*
+     * Registers x13-x23 are the various mode SP and FP registers. Registers
+     * r13 and r14 are only copied if we are in that mode, otherwise we copy
+     * from the mode banked register.
+     */
+    if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) {
+        env->xregs[13] = env->regs[13];
+        env->xregs[14] = env->regs[14];
+    } else {
+        env->xregs[13] = env->banked_r13[bank_number(ARM_CPU_MODE_USR)];
+        /* HYP is an exception in that it is copied from r14 */
+        if (mode == ARM_CPU_MODE_HYP) {
+            env->xregs[14] = env->regs[14];
+        } else {
+            env->xregs[14] = 
env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)];
+        }
+    }
+
+    if (mode == ARM_CPU_MODE_HYP) {
+        env->xregs[15] = env->regs[13];
+    } else {
+        env->xregs[15] = env->banked_r13[bank_number(ARM_CPU_MODE_HYP)];
+    }
+
+    if (mode == ARM_CPU_MODE_IRQ) {
+        env->xregs[16] = env->regs[14];
+        env->xregs[17] = env->regs[13];
+    } else {
+        env->xregs[16] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)];
+        env->xregs[17] = env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)];
+    }
+
+    if (mode == ARM_CPU_MODE_SVC) {
+        env->xregs[18] = env->regs[14];
+        env->xregs[19] = env->regs[13];
+    } else {
+        env->xregs[18] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)];
+        env->xregs[19] = env->banked_r13[bank_number(ARM_CPU_MODE_SVC)];
+    }
+
+    if (mode == ARM_CPU_MODE_ABT) {
+        env->xregs[20] = env->regs[14];
+        env->xregs[21] = env->regs[13];
+    } else {
+        env->xregs[20] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)];
+        env->xregs[21] = env->banked_r13[bank_number(ARM_CPU_MODE_ABT)];
+    }
+
+    if (mode == ARM_CPU_MODE_UND) {
+        env->xregs[22] = env->regs[14];
+        env->xregs[23] = env->regs[13];
+    } else {
+        env->xregs[22] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)];
+        env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)];
+    }
+
+    /*
+     * Registers x24-x30 are mapped to r8-r14 in FIQ mode.  If we are in FIQ
+     * mode, then we can copy from r8-r14.  Otherwise, we copy from the
+     * FIQ bank for r8-r14.
+     */
+    if (mode == ARM_CPU_MODE_FIQ) {
+        for (i = 24; i < 31; i++) {
+            env->xregs[i] = env->regs[i - 16];   /* X[24:30] <- R[8:14] */
+        }
+    } else {
+        for (i = 24; i < 29; i++) {
+            env->xregs[i] = env->fiq_regs[i - 24];
+        }
+        env->xregs[29] = env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)];
+        env->xregs[30] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)];
+    }
+
+    env->pc = env->regs[15];
+}
+
+/*
+ * Function used to synchronize QEMU's AArch32 register set with AArch64
+ * register set.  This is necessary when switching between AArch32 and AArch64
+ * execution state.
+ */
+void aarch64_sync_64_to_32(CPUARMState *env)
+{
+    int i;
+    uint32_t mode = env->uncached_cpsr & CPSR_M;
+
+    /* We can blanket copy X[0:7] to R[0:7] */
+    for (i = 0; i < 8; i++) {
+        env->regs[i] = env->xregs[i];
+    }
+
+    /*
+     * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12.
+     * Otherwise, we copy x8-x12 into the banked user regs.
+     */
+    if (mode == ARM_CPU_MODE_FIQ) {
+        for (i = 8; i < 13; i++) {
+            env->usr_regs[i - 8] = env->xregs[i];
+        }
+    } else {
+        for (i = 8; i < 13; i++) {
+            env->regs[i] = env->xregs[i];
+        }
+    }
+
+    /*
+     * Registers r13 & r14 depend on the current mode.
+     * If we are in a given mode, we copy the corresponding x registers to r13
+     * and r14.  Otherwise, we copy the x register to the banked r13 and r14
+     * for the mode.
+     */
+    if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) {
+        env->regs[13] = env->xregs[13];
+        env->regs[14] = env->xregs[14];
+    } else {
+        env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13];
+
+        /*
+         * HYP is an exception in that it does not have its own banked r14 but
+         * shares the USR r14
+         */
+        if (mode == ARM_CPU_MODE_HYP) {
+            env->regs[14] = env->xregs[14];
+        } else {
+            env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)] = 
env->xregs[14];
+        }
+    }
+
+    if (mode == ARM_CPU_MODE_HYP) {
+        env->regs[13] = env->xregs[15];
+    } else {
+        env->banked_r13[bank_number(ARM_CPU_MODE_HYP)] = env->xregs[15];
+    }
+
+    if (mode == ARM_CPU_MODE_IRQ) {
+        env->regs[14] = env->xregs[16];
+        env->regs[13] = env->xregs[17];
+    } else {
+        env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[16];
+        env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[17];
+    }
+
+    if (mode == ARM_CPU_MODE_SVC) {
+        env->regs[14] = env->xregs[18];
+        env->regs[13] = env->xregs[19];
+    } else {
+        env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)] = env->xregs[18];
+        env->banked_r13[bank_number(ARM_CPU_MODE_SVC)] = env->xregs[19];
+    }
+
+    if (mode == ARM_CPU_MODE_ABT) {
+        env->regs[14] = env->xregs[20];
+        env->regs[13] = env->xregs[21];
+    } else {
+        env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)] = env->xregs[20];
+        env->banked_r13[bank_number(ARM_CPU_MODE_ABT)] = env->xregs[21];
+    }
+
+    if (mode == ARM_CPU_MODE_UND) {
+        env->regs[14] = env->xregs[22];
+        env->regs[13] = env->xregs[23];
+    } else {
+        env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)] = env->xregs[22];
+        env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23];
+    }
+
+    /*
+     * Registers x24-x30 are mapped to r8-r14 in FIQ mode.  If we are in FIQ
+     * mode, then we can copy to r8-r14.  Otherwise, we copy to the
+     * FIQ bank for r8-r14.
+     */
+    if (mode == ARM_CPU_MODE_FIQ) {
+        for (i = 24; i < 31; i++) {
+            env->regs[i - 16] = env->xregs[i];   /* X[24:30] -> R[8:14] */
+        }
+    } else {
+        for (i = 24; i < 29; i++) {
+            env->fiq_regs[i - 24] = env->xregs[i];
+        }
+        env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[29];
+        env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[30];
+    }
+
+    env->regs[15] = env->pc;
+}
diff --git a/target/arm/cpu-user.c b/target/arm/cpu-user.c
index a72b7f5703..0225089e46 100644
--- a/target/arm/cpu-user.c
+++ b/target/arm/cpu-user.c
@@ -22,3 +22,14 @@ void switch_mode(CPUARMState *env, int mode)
         cpu_abort(CPU(cpu), "Tried to switch out of user mode\n");
     }
 }
+
+void aarch64_sync_64_to_32(CPUARMState *env)
+{
+    g_assert_not_reached();
+}
+
+uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
+                                 uint32_t cur_el, bool secure)
+{
+    return 1;
+}
diff --git a/target/arm/tcg/helper.c b/target/arm/tcg/helper.c
index 2e6edc96a8..b050bfda18 100644
--- a/target/arm/tcg/helper.c
+++ b/target/arm/tcg/helper.c
@@ -658,22 +658,10 @@ uint32_t HELPER(rbit)(uint32_t x)
     return revbit32(x);
 }
 
-#ifdef CONFIG_USER_ONLY
+#ifndef CONFIG_USER_ONLY
 
-uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx,
-                                 uint32_t cur_el, bool secure)
-{
-    return 1;
-}
-
-void aarch64_sync_64_to_32(CPUARMState *env)
-{
-    g_assert_not_reached();
-}
-
-#else
-
-/* Physical Interrupt Target EL Lookup Table
+/*
+ * Physical Interrupt Target EL Lookup Table
  *
  * [ From ARM ARM section G1.13.4 (Table G1-15) ]
  *
@@ -822,220 +810,6 @@ void arm_log_exception(int idx)
     }
 }
 
-/*
- * Function used to synchronize QEMU's AArch64 register set with AArch32
- * register set.  This is necessary when switching between AArch32 and AArch64
- * execution state.
- */
-void aarch64_sync_32_to_64(CPUARMState *env)
-{
-    int i;
-    uint32_t mode = env->uncached_cpsr & CPSR_M;
-
-    /* We can blanket copy R[0:7] to X[0:7] */
-    for (i = 0; i < 8; i++) {
-        env->xregs[i] = env->regs[i];
-    }
-
-    /*
-     * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12.
-     * Otherwise, they come from the banked user regs.
-     */
-    if (mode == ARM_CPU_MODE_FIQ) {
-        for (i = 8; i < 13; i++) {
-            env->xregs[i] = env->usr_regs[i - 8];
-        }
-    } else {
-        for (i = 8; i < 13; i++) {
-            env->xregs[i] = env->regs[i];
-        }
-    }
-
-    /*
-     * Registers x13-x23 are the various mode SP and FP registers. Registers
-     * r13 and r14 are only copied if we are in that mode, otherwise we copy
-     * from the mode banked register.
-     */
-    if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) {
-        env->xregs[13] = env->regs[13];
-        env->xregs[14] = env->regs[14];
-    } else {
-        env->xregs[13] = env->banked_r13[bank_number(ARM_CPU_MODE_USR)];
-        /* HYP is an exception in that it is copied from r14 */
-        if (mode == ARM_CPU_MODE_HYP) {
-            env->xregs[14] = env->regs[14];
-        } else {
-            env->xregs[14] = 
env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)];
-        }
-    }
-
-    if (mode == ARM_CPU_MODE_HYP) {
-        env->xregs[15] = env->regs[13];
-    } else {
-        env->xregs[15] = env->banked_r13[bank_number(ARM_CPU_MODE_HYP)];
-    }
-
-    if (mode == ARM_CPU_MODE_IRQ) {
-        env->xregs[16] = env->regs[14];
-        env->xregs[17] = env->regs[13];
-    } else {
-        env->xregs[16] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)];
-        env->xregs[17] = env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)];
-    }
-
-    if (mode == ARM_CPU_MODE_SVC) {
-        env->xregs[18] = env->regs[14];
-        env->xregs[19] = env->regs[13];
-    } else {
-        env->xregs[18] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)];
-        env->xregs[19] = env->banked_r13[bank_number(ARM_CPU_MODE_SVC)];
-    }
-
-    if (mode == ARM_CPU_MODE_ABT) {
-        env->xregs[20] = env->regs[14];
-        env->xregs[21] = env->regs[13];
-    } else {
-        env->xregs[20] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)];
-        env->xregs[21] = env->banked_r13[bank_number(ARM_CPU_MODE_ABT)];
-    }
-
-    if (mode == ARM_CPU_MODE_UND) {
-        env->xregs[22] = env->regs[14];
-        env->xregs[23] = env->regs[13];
-    } else {
-        env->xregs[22] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)];
-        env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)];
-    }
-
-    /*
-     * Registers x24-x30 are mapped to r8-r14 in FIQ mode.  If we are in FIQ
-     * mode, then we can copy from r8-r14.  Otherwise, we copy from the
-     * FIQ bank for r8-r14.
-     */
-    if (mode == ARM_CPU_MODE_FIQ) {
-        for (i = 24; i < 31; i++) {
-            env->xregs[i] = env->regs[i - 16];   /* X[24:30] <- R[8:14] */
-        }
-    } else {
-        for (i = 24; i < 29; i++) {
-            env->xregs[i] = env->fiq_regs[i - 24];
-        }
-        env->xregs[29] = env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)];
-        env->xregs[30] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)];
-    }
-
-    env->pc = env->regs[15];
-}
-
-/*
- * Function used to synchronize QEMU's AArch32 register set with AArch64
- * register set.  This is necessary when switching between AArch32 and AArch64
- * execution state.
- */
-void aarch64_sync_64_to_32(CPUARMState *env)
-{
-    int i;
-    uint32_t mode = env->uncached_cpsr & CPSR_M;
-
-    /* We can blanket copy X[0:7] to R[0:7] */
-    for (i = 0; i < 8; i++) {
-        env->regs[i] = env->xregs[i];
-    }
-
-    /*
-     * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12.
-     * Otherwise, we copy x8-x12 into the banked user regs.
-     */
-    if (mode == ARM_CPU_MODE_FIQ) {
-        for (i = 8; i < 13; i++) {
-            env->usr_regs[i - 8] = env->xregs[i];
-        }
-    } else {
-        for (i = 8; i < 13; i++) {
-            env->regs[i] = env->xregs[i];
-        }
-    }
-
-    /*
-     * Registers r13 & r14 depend on the current mode.
-     * If we are in a given mode, we copy the corresponding x registers to r13
-     * and r14.  Otherwise, we copy the x register to the banked r13 and r14
-     * for the mode.
-     */
-    if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) {
-        env->regs[13] = env->xregs[13];
-        env->regs[14] = env->xregs[14];
-    } else {
-        env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13];
-
-        /*
-         * HYP is an exception in that it does not have its own banked r14 but
-         * shares the USR r14
-         */
-        if (mode == ARM_CPU_MODE_HYP) {
-            env->regs[14] = env->xregs[14];
-        } else {
-            env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)] = 
env->xregs[14];
-        }
-    }
-
-    if (mode == ARM_CPU_MODE_HYP) {
-        env->regs[13] = env->xregs[15];
-    } else {
-        env->banked_r13[bank_number(ARM_CPU_MODE_HYP)] = env->xregs[15];
-    }
-
-    if (mode == ARM_CPU_MODE_IRQ) {
-        env->regs[14] = env->xregs[16];
-        env->regs[13] = env->xregs[17];
-    } else {
-        env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[16];
-        env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[17];
-    }
-
-    if (mode == ARM_CPU_MODE_SVC) {
-        env->regs[14] = env->xregs[18];
-        env->regs[13] = env->xregs[19];
-    } else {
-        env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)] = env->xregs[18];
-        env->banked_r13[bank_number(ARM_CPU_MODE_SVC)] = env->xregs[19];
-    }
-
-    if (mode == ARM_CPU_MODE_ABT) {
-        env->regs[14] = env->xregs[20];
-        env->regs[13] = env->xregs[21];
-    } else {
-        env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)] = env->xregs[20];
-        env->banked_r13[bank_number(ARM_CPU_MODE_ABT)] = env->xregs[21];
-    }
-
-    if (mode == ARM_CPU_MODE_UND) {
-        env->regs[14] = env->xregs[22];
-        env->regs[13] = env->xregs[23];
-    } else {
-        env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)] = env->xregs[22];
-        env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23];
-    }
-
-    /* Registers x24-x30 are mapped to r8-r14 in FIQ mode.  If we are in FIQ
-     * mode, then we can copy to r8-r14.  Otherwise, we copy to the
-     * FIQ bank for r8-r14.
-     */
-    if (mode == ARM_CPU_MODE_FIQ) {
-        for (i = 24; i < 31; i++) {
-            env->regs[i - 16] = env->xregs[i];   /* X[24:30] -> R[8:14] */
-        }
-    } else {
-        for (i = 24; i < 29; i++) {
-            env->fiq_regs[i - 24] = env->xregs[i];
-        }
-        env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[29];
-        env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[30];
-    }
-
-    env->regs[15] = env->pc;
-}
-
 static void take_aarch32_exception(CPUARMState *env, int new_mode,
                                    uint32_t mask, uint32_t offset,
                                    uint32_t newpc)
-- 
2.26.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]