Re: [PATCH v5 3/4] Jobs based on custom runners: docs and gitlab-runner setup playbook

[Wainer dos Santos Moschetta]

Hi,

On 2/19/21 6:58 PM, Cleber Rosa wrote:
> To have the jobs dispatched to custom runners, gitlab-runner must
> be installed, active as a service and properly configured.  The
> variables file and playbook introduced here should help with those
> steps.
>
> The playbook introduced here covers a number of different Linux
> distributions and FreeBSD, and are intended to provide a reproducible
> environment.
>
> Signed-off-by: Cleber Rosa <crosa@redhat.com>
> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
> ---
>   docs/devel/ci.rst                  | 58 ++++++++++++++++++++++++++
>   scripts/ci/setup/.gitignore        |  1 +
>   scripts/ci/setup/gitlab-runner.yml | 65 ++++++++++++++++++++++++++++++
>   scripts/ci/setup/vars.yml.template | 13 ++++++
>   4 files changed, 137 insertions(+)
>   create mode 100644 scripts/ci/setup/.gitignore
>   create mode 100644 scripts/ci/setup/gitlab-runner.yml
>   create mode 100644 scripts/ci/setup/vars.yml.template
>
> diff --git a/docs/devel/ci.rst b/docs/devel/ci.rst
> index a556558435..9f9c4bd3f9 100644
> --- a/docs/devel/ci.rst
> +++ b/docs/devel/ci.rst
> @@ -56,3 +56,61 @@ To run the playbook, execute::
>   
>     cd scripts/ci/setup
>     ansible-playbook -i inventory build-environment.yml
> +
> +gitlab-runner setup and registration
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +The gitlab-runner agent needs to be installed on each machine that
> +will run jobs.  The association between a machine and a GitLab project
> +happens with a registration token.  To find the registration token for
> +your repository/project, navigate on GitLab's web UI to:
> +
> + * Settings (the gears like icon), then
> + * CI/CD, then
> + * Runners, and click on the "Expand" button, then
> + * Under "Set up a specific Runner manually", look for the value under
> +   "Use the following registration token during setup"
> +
> +Copy the ``scripts/ci/setup/vars.yml.template`` file to
> +``scripts/ci/setup/vars.yml``.  Then, set the
> +``gitlab_runner_registration_token`` variable to the value obtained
> +earlier.
> +
> +.. note:: gitlab-runner is not available from the standard location
> +          for all OS and architectures combinations.  For some systems,
> +          a custom build may be necessary.  Some builds are avaiable
> +          at https://cleber.fedorapeople.org/gitlab-runner/ and this
> +          URI may be used as a value on ``vars.yml``
FYI the latest version (13.8.0) provides a s390x build.
> +
> +To run the playbook, execute::
> +
> +  cd scripts/ci/setup
> +  ansible-playbook -i inventory gitlab-runner.yml
> +
> +Following the registration, it's necessary to configure the runner tags,
> +and optionally other configurations on the GitLab UI.  Navigate to:
> +
> + * Settings (the gears like icon), then
> + * CI/CD, then
> + * Runners, and click on the "Expand" button, then
> + * "Runners activated for this project", then
> + * Click on the "Edit" icon (next to the "Lock" Icon)
> +
> +Under tags, add values matching the jobs a runner should run.  For a
> +Ubuntu 20.04 aarch64 system, the tags should be set as::
> +
> +  ubuntu_20.04,aarch64
> +
> +Because the job definition at ``.gitlab-ci.d/custom-runners.yml``
> +would contain::
> +
> +  ubuntu-20.04-aarch64-all:
> +   tags:
> +   - ubuntu_20.04
> +   - aarch64
> +
> +It's also recommended to:
> +
> + * increase the "Maximum job timeout" to something like ``2h``
> + * uncheck the "Run untagged jobs" check box
> + * give it a better Description
> diff --git a/scripts/ci/setup/.gitignore b/scripts/ci/setup/.gitignore
> new file mode 100644
> index 0000000000..f112d05dd0
> --- /dev/null
> +++ b/scripts/ci/setup/.gitignore
> @@ -0,0 +1 @@
> +vars.yml
> \ No newline at end of file
> diff --git a/scripts/ci/setup/gitlab-runner.yml 
> b/scripts/ci/setup/gitlab-runner.yml
> new file mode 100644
> index 0000000000..ab1944965f
> --- /dev/null
> +++ b/scripts/ci/setup/gitlab-runner.yml
> @@ -0,0 +1,65 @@
> +---
> +- name: Installation of gitlab-runner
> +  hosts: all
> +  vars_files:
> +    - vars.yml
> +  tasks:
> +    - debug:
> +        msg: 'Checking for a valid GitLab registration token'
> +      failed_when: "gitlab_runner_registration_token == 
> 'PLEASE_PROVIDE_A_VALID_TOKEN'"
> +
> +    - name: Checks the availability of official gitlab-runner builds in the 
> archive
> +      uri:
> +        url: https://s3.amazonaws.com/gitlab-runner-downloads/v{{ 
> gitlab_runner_version  }}/binaries/gitlab-runner-linux-386

Where it checks for 386 then later it uses gitlab_runner_arch (amd64 by 
default). It is not consistent.

Also, why not use ansible_machine + jinja2 to convert x86_64 -> amd64, 
aarch64 -> arm64...etc?

> +        method: HEAD
> +        status_code:
> +          - 200
> +          - 403
> +      register: gitlab_runner_available_archive
> +
> +    - name: Update base url
> +      set_fact:
> +        gitlab_runner_base_url: 
> https://s3.amazonaws.com/gitlab-runner-downloads/v{{ gitlab_runner_version  
> }}/binaries/gitlab-runner-
> +      when: gitlab_runner_available_archive.status == 200
> +    - debug:
> +        msg: Base gitlab-runner url is {{ gitlab_runner_base_url  }}
> +
> +    - name: Create a group for the gitlab-runner service
> +      group:
> +        name: gitlab-runner
> +
> +    - name: Create a user for the gitlab-runner service
> +      user:
> +        user: gitlab-runner
> +        group: gitlab-runner
> +        comment: GitLab Runner
> +        home: /home/gitlab-runner
> +        shell: /bin/bash
> +
> +    - name: Remove the .bash_logout file when on Ubuntu systems
> +      file:
> +        path: /home/gitlab-runner/.bash_logout
> +        state: absent
> +      when: "ansible_facts['distribution'] == 'Ubuntu'"
> +
> +    - name: Downloads the matching gitlab-runner
> +      get_url:
> +        dest: /usr/local/bin/gitlab-runner
> +        url: "{{ gitlab_runner_base_url }}{{ gitlab_runner_os }}-{{ 
> gitlab_runner_arch }}"


And here instead of gitlab_runner_os, {{ ansible_system | lower }} 
should work out.

- Wainer

> +        owner: gitlab-runner
> +        group: gitlab-runner
> +        mode: u=rwx,g=rwx,o=rx
> +
> +    - name: Register the gitlab-runner
> +      command: "/usr/local/bin/gitlab-runner register --non-interactive --url {{ gitlab_runner_server_url }} 
> --registration-token {{ gitlab_runner_registration_token }} --executor shell  --description '{{ 
> ansible_facts[\"distribution\"] }} {{ ansible_facts[\"distribution_version\"] }} {{ 
> ansible_facts[\"architecture\"] }} ({{ ansible_facts[\"os_family\"] }})'"
> +
> +    - name: Install the gitlab-runner service using its own functionality
> +      command: /usr/local/bin/gitlab-runner install --user gitlab-runner 
> --working-directory /home/gitlab-runner
> +      register: gitlab_runner_install_service_result
> +      failed_when: "gitlab_runner_install_service_result.rc != 0 and \"already 
> exists\" not in gitlab_runner_install_service_result.stderr"
> +
> +    - name: Enable the gitlab-runner service
> +      service:
> +        name: gitlab-runner
> +        state: started
> +        enabled: yes
> diff --git a/scripts/ci/setup/vars.yml.template 
> b/scripts/ci/setup/vars.yml.template
> new file mode 100644
> index 0000000000..621435d030
> --- /dev/null
> +++ b/scripts/ci/setup/vars.yml.template
> @@ -0,0 +1,13 @@
> +# The version of the gitlab-runner to use
> +gitlab_runner_version: 13.1.1
> +# The base location of gitlab-runner binaries, this will be suffixed by 
> $OS-$ARCH
> +gitlab_runner_base_url: 
> https://gitlab-runner-downloads.s3.amazonaws.com/latest/binaries/gitlab-runner-
> +# The URL of the gitlab server to use, usually https://gitlab.com unless you're
> +# using a private GitLab instance
> +gitlab_runner_server_url: https://gitlab.com
> +# Defaults to linux, checks can be used to change this
> +gitlab_runner_os: linux
> +# Defaults to amd64 (x86_64), checks can be used to change this
> +gitlab_runner_arch: amd64
> +# A unique token made available by GitLab to your project for registering 
> runners
> +gitlab_runner_registration_token: PLEASE_PROVIDE_A_VALID_TOKEN