qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [RFC PATCH 12/15] sd: emmc: Support boot area in emmc image


From: Alistair Francis
Subject: Re: [RFC PATCH 12/15] sd: emmc: Support boot area in emmc image
Date: Fri, 12 Feb 2021 14:16:45 -0800

On Thu, Feb 11, 2021 at 12:15 AM Sai Pavan Boddu
<sai.pavan.boddu@xilinx.com> wrote:
>
> From: Joel Stanley <joel@jms.id.au>
>
> This assumes a specially constructued image:
>
>   dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M
>   dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc
>   dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K
>   cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img
>   truncate --size 16GB mmc.img
>   truncate --size 128MB mmc-bootarea.img

Could we document this somewhere user accessible?

Alistair

>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> [clg: - changes on the definition names ]
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> [spb: use data_start property to access right emmc partition,
>       Clean up PARTITION_ENABLE support as incomplete,
>       Fix commit message to be generic.]
> Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
> ---
>  hw/sd/sd.c | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>
> diff --git a/hw/sd/sd.c b/hw/sd/sd.c
> index 54fba7b..55c1104 100644
> --- a/hw/sd/sd.c
> +++ b/hw/sd/sd.c
> @@ -1045,6 +1045,34 @@ static void sd_lock_command(SDState *sd)
>          sd->card_status &= ~CARD_IS_LOCKED;
>  }
>
> +/*
> + * This requires a disk image that has two boot partitions inserted at the
> + * beginning of it. The size of the boot partitions are configured in the
> + * ext_csd structure, which is hardcoded in qemu. They are currently set to
> + * 1MB each.
> + */
> +static uint32_t sd_bootpart_offset(SDState *sd)
> +{
> +    unsigned int access = sd->ext_csd[EXT_CSD_PART_CONFIG] &
> +        EXT_CSD_PART_CONFIG_ACC_MASK;
> +    unsigned int boot_capacity = sd->ext_csd[EXT_CSD_BOOT_MULT] << 17;
> +
> +    if (!sd->emmc) {
> +        return 0;
> +    }
> +
> +    switch (access) {
> +    case EXT_CSD_PART_CONFIG_ACC_DEFAULT:
> +        return boot_capacity * 2;
> +    case EXT_CSD_PART_CONFIG_ACC_BOOT0:
> +        return 0;
> +    case EXT_CSD_PART_CONFIG_ACC_BOOT0 + 1:
> +        return boot_capacity * 1;
> +    default:
> +         g_assert_not_reached();
> +    }
> +}
> +
>  static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
>  {
>      uint32_t rca = 0x0000;
> @@ -1360,6 +1388,9 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, 
> SDRequest req)
>                  return sd_r1;
>              }
>
> +            if (sd->emmc) {
> +                addr += sd_bootpart_offset(sd);
> +            }
>              sd->state = sd_sendingdata_state;
>              sd->data_start = addr;
>              sd->data_offset = 0;
> @@ -1379,6 +1410,9 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, 
> SDRequest req)
>                  return sd_r1;
>              }
>
> +            if (sd->emmc) {
> +                addr += sd_bootpart_offset(sd);
> +            }
>              sd->state = sd_sendingdata_state;
>              sd->data_start = addr;
>              sd->data_offset = 0;
> @@ -1435,6 +1469,9 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, 
> SDRequest req)
>                  return sd_r1;
>              }
>
> +            if (sd->emmc) {
> +                addr += sd_bootpart_offset(sd);
> +            }
>              sd->state = sd_receivingdata_state;
>              sd->data_start = addr;
>              sd->data_offset = 0;
> @@ -1465,6 +1502,9 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, 
> SDRequest req)
>                  return sd_r1;
>              }
>
> +            if (sd->emmc) {
> +                addr += sd_bootpart_offset(sd);
> +            }
>              sd->state = sd_receivingdata_state;
>              sd->data_start = addr;
>              sd->data_offset = 0;
> --
> 2.7.4
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]