qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v1 1/3] target/microblaze: Add use-non-secure property


From: Edgar E. Iglesias
Subject: Re: [PATCH v1 1/3] target/microblaze: Add use-non-secure property
Date: Tue, 26 Jan 2021 12:16:16 +0100
User-agent: Mutt/1.10.1 (2018-07-13)

On Thu, Jan 21, 2021 at 04:18:53PM -0800, Joe Komlodi wrote:
> This property is used to control the security of the following interfaces
> on MicroBlaze:
> M_AXI_DP - data interface
> M_AXI_IP - instruction interface
> M_AXI_DC - dcache interface
> M_AXI_IC - icache interface
> 
> It works by enabling or disabling the use of the non_secure[3:0] signals.
> 
> Interfaces and their corresponding values are taken from:
> https://www.xilinx.com/support/documentation/sw_manuals/xilinx2020_2/ug984-vivado-microblaze-ref.pdf
> page 153.

Thanks Joe!

Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>



> 
> Signed-off-by: Joe Komlodi <komlodi@xilinx.com>
> ---
>  target/microblaze/cpu.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
>  target/microblaze/cpu.h | 11 +++++++++++
>  2 files changed, 57 insertions(+)
> 
> diff --git a/target/microblaze/cpu.c b/target/microblaze/cpu.c
> index c8e754c..accfb23 100644
> --- a/target/microblaze/cpu.c
> +++ b/target/microblaze/cpu.c
> @@ -98,6 +98,38 @@ static bool mb_cpu_has_work(CPUState *cs)
>  }
>  
>  #ifndef CONFIG_USER_ONLY
> +static void mb_cpu_ns_axi_dp(void *opaque, int irq, int level)
> +{
> +    MicroBlazeCPU *cpu = opaque;
> +    bool en = cpu->cfg.use_non_secure & USE_NON_SECURE_M_AXI_DP_MASK;
> +
> +    cpu->ns_axi_dp = level & en;
> +}
> +
> +static void mb_cpu_ns_axi_ip(void *opaque, int irq, int level)
> +{
> +    MicroBlazeCPU *cpu = opaque;
> +    bool en = cpu->cfg.use_non_secure & USE_NON_SECURE_M_AXI_IP_MASK;
> +
> +    cpu->ns_axi_ip = level & en;
> +}
> +
> +static void mb_cpu_ns_axi_dc(void *opaque, int irq, int level)
> +{
> +    MicroBlazeCPU *cpu = opaque;
> +    bool en = cpu->cfg.use_non_secure & USE_NON_SECURE_M_AXI_DC_MASK;
> +
> +    cpu->ns_axi_dc = level & en;
> +}
> +
> +static void mb_cpu_ns_axi_ic(void *opaque, int irq, int level)
> +{
> +    MicroBlazeCPU *cpu = opaque;
> +    bool en = cpu->cfg.use_non_secure & USE_NON_SECURE_M_AXI_IC_MASK;
> +
> +    cpu->ns_axi_ic = level & en;
> +}
> +
>  static void microblaze_cpu_set_irq(void *opaque, int irq, int level)
>  {
>      MicroBlazeCPU *cpu = opaque;
> @@ -248,6 +280,10 @@ static void mb_cpu_initfn(Object *obj)
>  #ifndef CONFIG_USER_ONLY
>      /* Inbound IRQ and FIR lines */
>      qdev_init_gpio_in(DEVICE(cpu), microblaze_cpu_set_irq, 2);
> +    qdev_init_gpio_in_named(DEVICE(cpu), mb_cpu_ns_axi_dp, "ns_axi_dp", 1);
> +    qdev_init_gpio_in_named(DEVICE(cpu), mb_cpu_ns_axi_ip, "ns_axi_ip", 1);
> +    qdev_init_gpio_in_named(DEVICE(cpu), mb_cpu_ns_axi_dc, "ns_axi_dc", 1);
> +    qdev_init_gpio_in_named(DEVICE(cpu), mb_cpu_ns_axi_ic, "ns_axi_ic", 1);
>  #endif
>  }
>  
> @@ -277,6 +313,16 @@ static Property mb_properties[] = {
>      DEFINE_PROP_BOOL("use-msr-instr", MicroBlazeCPU, cfg.use_msr_instr, 
> true),
>      DEFINE_PROP_BOOL("use-pcmp-instr", MicroBlazeCPU, cfg.use_pcmp_instr, 
> true),
>      DEFINE_PROP_BOOL("use-mmu", MicroBlazeCPU, cfg.use_mmu, true),
> +    /*
> +     * use-non-secure enables/disables the use of the non_secure[3:0] 
> signals.
> +     * It is a bitfield where 1 = non-secure for the following bits and their
> +     * corresponding interfaces:
> +     * 0x1 - M_AXI_DP
> +     * 0x2 - M_AXI_IP
> +     * 0x4 - M_AXI_DC
> +     * 0x8 - M_AXI_IC
> +     */
> +    DEFINE_PROP_UINT8("use-non-secure", MicroBlazeCPU, cfg.use_non_secure, 
> 0),
>      DEFINE_PROP_BOOL("dcache-writeback", MicroBlazeCPU, cfg.dcache_writeback,
>                       false),
>      DEFINE_PROP_BOOL("endianness", MicroBlazeCPU, cfg.endi, false),
> diff --git a/target/microblaze/cpu.h b/target/microblaze/cpu.h
> index c1c2641..199cfb0 100644
> --- a/target/microblaze/cpu.h
> +++ b/target/microblaze/cpu.h
> @@ -233,6 +233,12 @@ typedef struct CPUMBState CPUMBState;
>  
>  #define TARGET_INSN_START_EXTRA_WORDS 1
>  
> +/* use-non-secure property masks */
> +#define USE_NON_SECURE_M_AXI_DP_MASK 0x1
> +#define USE_NON_SECURE_M_AXI_IP_MASK 0x2
> +#define USE_NON_SECURE_M_AXI_DC_MASK 0x4
> +#define USE_NON_SECURE_M_AXI_IC_MASK 0x8
> +
>  struct CPUMBState {
>      uint32_t bvalue;   /* TCG temporary, only valid during a TB */
>      uint32_t btarget;  /* Full resolved branch destination */
> @@ -316,6 +322,7 @@ typedef struct {
>      bool use_msr_instr;
>      bool use_pcmp_instr;
>      bool use_mmu;
> +    uint8_t use_non_secure;
>      bool dcache_writeback;
>      bool endi;
>      bool dopb_bus_exception;
> @@ -337,6 +344,10 @@ struct MicroBlazeCPU {
>      CPUState parent_obj;
>  
>      /*< public >*/
> +    bool ns_axi_dp;
> +    bool ns_axi_ip;
> +    bool ns_axi_dc;
> +    bool ns_axi_ic;
>  
>      CPUNegativeOffsetState neg;
>      CPUMBState env;
> -- 
> 2.7.4
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]