[PATCH 11/25] hw/arm/armsse: Wire up clocks

[Peter Maydell]

Create two input clocks on the ARMSSE devices, one for the normal
MAINCLK, and one for the 32KHz S32KCLK, and wire these up to the
appropriate devices.  The old property-based clock frequency setting
will remain in place until conversion is complete.

This is a migration compatibility break for machines mps2-an505,
mps2-an521, musca-a, musca-b1.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/armsse.h |  6 ++++++
 hw/arm/armsse.c         | 17 +++++++++++++++--
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/include/hw/arm/armsse.h b/include/hw/arm/armsse.h
index 4860a793f4b..bfa1e79c4fe 100644
--- a/include/hw/arm/armsse.h
+++ b/include/hw/arm/armsse.h
@@ -37,6 +37,8 @@
  *  per-CPU identity and control register blocks
  *
  * QEMU interface:
+ *  + Clock input "MAINCLK": clock for CPUs and most peripherals
+ *  + Clock input "S32KCLK": slow 32KHz clock used for a few peripherals
  *  + QOM property "memory" is a MemoryRegion containing the devices provided
  *    by the board model.
  *  + QOM property "MAINCLK_FRQ" is the frequency of the main system clock
@@ -103,6 +105,7 @@
 #include "hw/misc/armsse-mhu.h"
 #include "hw/misc/unimp.h"
 #include "hw/or-irq.h"
+#include "hw/clock.h"
 #include "hw/core/split-irq.h"
 #include "hw/cpu/cluster.h"
 #include "qom/object.h"
@@ -209,6 +212,9 @@ struct ARMSSE {
 
     uint32_t nsccfg;
 
+    Clock *mainclk;
+    Clock *s32kclk;
+
     /* Properties */
     MemoryRegion *board_memory;
     uint32_t exp_numirq;
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index d2ba0459c44..4349ce9bfdb 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -21,6 +21,7 @@
 #include "hw/arm/armsse.h"
 #include "hw/arm/boot.h"
 #include "hw/irq.h"
+#include "hw/qdev-clock.h"
 
 /* Format of the System Information block SYS_CONFIG register */
 typedef enum SysConfigFormat {
@@ -241,6 +242,9 @@ static void armsse_init(Object *obj)
     assert(info->sram_banks <= MAX_SRAM_BANKS);
     assert(info->num_cpus <= SSE_MAX_CPUS);
 
+    s->mainclk = qdev_init_clock_in(DEVICE(s), "MAINCLK", NULL, NULL);
+    s->s32kclk = qdev_init_clock_in(DEVICE(s), "S32KCLK", NULL, NULL);
+
     memory_region_init(&s->container, obj, "armsse-container", UINT64_MAX);
 
     for (i = 0; i < info->num_cpus; i++) {
@@ -711,6 +715,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
      * map its upstream ends to the right place in the container.
      */
     qdev_prop_set_uint32(DEVICE(&s->timer0), "pclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->timer0), "pclk", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer0), errp)) {
         return;
     }
@@ -721,6 +726,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                              &error_abort);
 
     qdev_prop_set_uint32(DEVICE(&s->timer1), "pclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->timer1), "pclk", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer1), errp)) {
         return;
     }
@@ -731,6 +737,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                              &error_abort);
 
     qdev_prop_set_uint32(DEVICE(&s->dualtimer), "pclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->dualtimer), "TIMCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->dualtimer), errp)) {
         return;
     }
@@ -889,6 +896,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
      *   0x4002f000: S32K timer
      */
     qdev_prop_set_uint32(DEVICE(&s->s32ktimer), "pclk-frq", S32KCLK);
+    qdev_connect_clock_in(DEVICE(&s->s32ktimer), "pclk", s->s32kclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32ktimer), errp)) {
         return;
     }
@@ -982,6 +990,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
                           qdev_get_gpio_in_named(DEVICE(&s->armv7m), "NMI", 
0));
 
     qdev_prop_set_uint32(DEVICE(&s->s32kwatchdog), "wdogclk-frq", S32KCLK);
+    qdev_connect_clock_in(DEVICE(&s->s32kwatchdog), "WDOGCLK", s->s32kclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->s32kwatchdog), errp)) {
         return;
     }
@@ -992,6 +1001,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     /* 0x40080000 .. 0x4008ffff : ARMSSE second Base peripheral region */
 
     qdev_prop_set_uint32(DEVICE(&s->nswatchdog), "wdogclk-frq", 
s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->nswatchdog), "WDOGCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->nswatchdog), errp)) {
         return;
     }
@@ -1000,6 +1010,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
     sysbus_mmio_map(SYS_BUS_DEVICE(&s->nswatchdog), 0, 0x40081000);
 
     qdev_prop_set_uint32(DEVICE(&s->swatchdog), "wdogclk-frq", s->mainclk_frq);
+    qdev_connect_clock_in(DEVICE(&s->swatchdog), "WDOGCLK", s->mainclk);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->swatchdog), errp)) {
         return;
     }
@@ -1127,9 +1138,11 @@ static void armsse_idau_check(IDAUInterface *ii, 
uint32_t address,
 
 static const VMStateDescription armsse_vmstate = {
     .name = "iotkit",
-    .version_id = 1,
-    .minimum_version_id = 1,
+    .version_id = 2,
+    .minimum_version_id = 2,
     .fields = (VMStateField[]) {
+        VMSTATE_CLOCK(mainclk, ARMSSE),
+        VMSTATE_CLOCK(s32kclk, ARMSSE),
         VMSTATE_UINT32(nsccfg, ARMSSE),
         VMSTATE_END_OF_LIST()
     }
-- 
2.20.1