[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Bug 1900155] Re: MIPS Malta fails booting due to IDE error
From: |
Philippe Mathieu-Daudé |
Subject: |
[Bug 1900155] Re: MIPS Malta fails booting due to IDE error |
Date: |
Tue, 17 Nov 2020 11:03:33 -0000 |
Fixed by commits 4ac4e7281a2..1a9925e3390.
** Changed in: qemu
Status: New => Fix Committed
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1900155
Title:
MIPS Malta fails booting due to IDE error
Status in QEMU:
Fix Committed
Bug description:
As of commit 3e407488349:
$ avocado --show=console run -t machine:malta
tests/acceptance/boot_linux_console.py
console: [ 0.000000] Linux version 4.5.0-2-4kc-malta
(debian-kernel@lists.debian.org) (gcc version 5.3.1 20160519 (Debian 5.3.1-20)
) #1 Debian 4.5.5-1 (2016-05-29)
console: [ 0.000000] earlycon: Early serial console at I/O port 0x3f8
(options '38400n8')
console: [ 0.000000] bootconsole [uart0] enabled
console: [ 0.000000] CPU0 revision is: 00019300 (MIPS 24Kc)
console: [ 0.000000] FPU revision is: 00739300
console: [ 0.000000] MIPS: machine is mti,malta
[...]
console: ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
console: ata2.00: Drive reports diagnostics failure. This may indicate a drive
console: ata2.00: fault or invalid emulation. Contact drive vendor for
information.
console: ata2.00: configured for UDMA/33
console: scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0
ANSI: 5
console: Freeing unused kernel memory: 412K (80979000 - 809e0000)
console: do_page_fault(): sending SIGSEGV to mount for invalid write access
to 0018a000
console: epc = 775cca54 in libc-2.27.so[775b3000+177000]
console: ra = 77754618 in ld-2.27.so[77743000+24000]
console: do_page_fault(): sending SIGSEGV to klogd for invalid write access
to 0018a000
console: epc = 770f0a54 in libc-2.27.so[770d7000+177000]
console: ra = 77278618 in ld-2.27.so[77267000+24000]
console: do_page_fault(): sending SIGSEGV to S20urandom for invalid write
access to 0018a000
console: epc = 77d0ca54 in libc-2.27.so[77cf3000+177000]
console: ra = 77e94618 in ld-2.27.so[77e83000+24000]
console: do_page_fault(): sending SIGSEGV to mkdir for invalid write access
to 0018a000
console: epc = 776b8a54 in libc-2.27.so[7769f000+177000]
console: ra = 77840618 in ld-2.27.so[7782f000+24000]
console: do_page_fault(): sending SIGSEGV to sh for invalid write access to
0018a000
console: epc = 77364a54 in libc-2.27.so[7734b000+177000]
console: ra = 774ec618 in ld-2.27.so[774db000+24000]
console: do_page_fault(): sending SIGSEGV to sh for invalid write access to
0018a000
console: epc = 77bd4a54 in libc-2.27.so[77bbb000+177000]
console: ra = 77d5c618 in ld-2.27.so[77d4b000+24000]
console: do_page_fault(): sending SIGSEGV to awk for invalid write access to
0018a000
console: epc = 76f44a54 in libc-2.27.so[76f2b000+177000]
console: ra = 770cc618 in ld-2.27.so[770bb000+24000]
console: do_page_fault(): sending SIGSEGV to cat for invalid write access to
0018a000
console: epc = 770cca54 in libc-2.27.so[770b3000+177000]
console: ra = 77254618 in ld-2.27.so[77243000+24000]
$ echo $?
8
55adb3c45620c31f29978f209e2a44a08d34e2da is the first bad commit
commit 55adb3c45620c31f29978f209e2a44a08d34e2da
Author: John Snow <jsnow@redhat.com>
Date: Fri Jul 24 01:23:00 2020 -0400
ide: cancel pending callbacks on SRST
The SRST implementation did not keep up with the rest of IDE; it is
possible to perform a weak reset on an IDE device to remove the BSY/DRQ
bits, and then issue writes to the control/device registers which can
cause chaos with the state machine.
Fix that by actually performing a real reset.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1900155/+subscriptions
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Bug 1900155] Re: MIPS Malta fails booting due to IDE error,
Philippe Mathieu-Daudé <=