[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug 1759338] Re: qemu-system-sparc w/ SS-20 ROM does not add proces
From: |
address@hidden |
Subject: |
Re: [Bug 1759338] Re: qemu-system-sparc w/ SS-20 ROM does not add processors |
Date: |
Fri, 13 Nov 2020 16:43:16 -0000 |
Yes this can be closed, no problems now using open bios to boot Solaris
and it does support multiple processors though this is actually slower
than one.
Sent from my mobile device
On Nov 13, 2020, at 11:41 AM, Peter Maydell <1759338@bugs.launchpad.net>
wrote:
Reporter said in comment #1 that the bug can be closed, so let's close
it :-)
** Changed in: qemu
Status: Incomplete => Fix Released
--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1759338<https://bugs.launchpad.net/bugs/1759338>
Title:
qemu-system-sparc w/ SS-20 ROM does not add processors
Status in QEMU:
Fix Released
Bug description:
When booting a SPARCstation-20 with the original ROM, qemu does not
set the number of processors in a way that this ROM can understand it,
and the ROM always reports only 1 processor installed:
~/qemu /usr/local/bin/qemu-system-sparc -bios ./ss20_v2.25_rom -M SS-20 -cpu
"TI SuperSparc 60" -smp 2 -nographic
Power-ON Reset
SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95)
CPU_#0 TI, TMS390Z50(3.x) 0Mb External cache
CPU_#1 ******* NOT installed *******
CPU_#2 ******* NOT installed *******
CPU_#3 ******* NOT installed *******
<<< CPU_00000000 on MBus Slot_00000000 >>> IS RUNNING (MID =
00000008)
...
Cpu #0 TI,TMS390Z50
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
...
SPARCstation 20 (1 X 390Z50), No Keyboard
ROM Rev. 2.25, 128 MB memory installed, Serial #1193046.
Ethernet address 52:54:0:12:34:56, Host ID: 72123456.
(It is necessary use SS-20 since it is the only sun4m model that
supports 512MB RAM, and I can't get Solaris to install on the SS-20
using OpenBIOS.)
When booting with OpenBIOS I can't seem to boot any version of Solaris
though I had heard this did work. Solaris 8 and 9 do work nicely with
this ROM, but I am opening this to see if it is possible to fix this
to allow the original OBP ROM to see multiple processors.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions<https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions>
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1759338
Title:
qemu-system-sparc w/ SS-20 ROM does not add processors
Status in QEMU:
Fix Released
Bug description:
When booting a SPARCstation-20 with the original ROM, qemu does not
set the number of processors in a way that this ROM can understand it,
and the ROM always reports only 1 processor installed:
~/qemu /usr/local/bin/qemu-system-sparc -bios ./ss20_v2.25_rom -M SS-20
-cpu "TI SuperSparc 60" -smp 2 -nographic
Power-ON Reset
SMCC SPARCstation 10/20 UP/MP POST version VRV3.45 (09/11/95)
CPU_#0 TI, TMS390Z50(3.x) 0Mb External cache
CPU_#1 ******* NOT installed *******
CPU_#2 ******* NOT installed *******
CPU_#3 ******* NOT installed *******
<<< CPU_00000000 on MBus Slot_00000000 >>> IS RUNNING (MID =
00000008)
...
Cpu #0 TI,TMS390Z50
Cpu #1 Nothing there
Cpu #2 Nothing there
Cpu #3 Nothing there
...
SPARCstation 20 (1 X 390Z50), No Keyboard
ROM Rev. 2.25, 128 MB memory installed, Serial #1193046.
Ethernet address 52:54:0:12:34:56, Host ID: 72123456.
(It is necessary use SS-20 since it is the only sun4m model that supports
512MB RAM, and I can't get Solaris to install on the SS-20 using OpenBIOS.)
When booting with OpenBIOS I can't seem to boot any version of Solaris
though I had heard this did work. Solaris 8 and 9 do work nicely with
this ROM, but I am opening this to see if it is possible to fix this
to allow the original OBP ROM to see multiple processors.
To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1759338/+subscriptions