qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] qtest: Update references to parse_escape() in comments


From: Thomas Huth
Subject: Re: [PATCH] qtest: Update references to parse_escape() in comments
Date: Mon, 9 Nov 2020 18:02:00 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.6.0

On 09/11/2020 17.26, Peter Maydell wrote:
> In commit 61030280ca2d67bd in 2018 we renamed the parse_escape()
> function to parse_interpolation(), but we didn't catch the references
> to this function in doc comments in libqtest.h. Update them.
> 
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
> ---
> Side note: ideally we would document somewhere the accepted
> %-escapes rather than requiring people to read the source code
> to parse_interpolation to determine them... "The argument to %p
> is qobject_unref()ed" is particularly non-obvious.
> ---
>  tests/qtest/libqos/libqtest.h | 18 +++++++++---------
>  tests/qtest/libqtest-single.h |  2 +-
>  2 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/tests/qtest/libqos/libqtest.h b/tests/qtest/libqos/libqtest.h
> index 5c959f18535..724f65aa947 100644
> --- a/tests/qtest/libqos/libqtest.h
> +++ b/tests/qtest/libqos/libqtest.h
> @@ -88,7 +88,7 @@ void qtest_quit(QTestState *s);
>   * @fds: array of file descriptors
>   * @fds_num: number of elements in @fds
>   * @fmt: QMP message to send to qemu, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   *
>   * Sends a QMP message to QEMU with fds and returns the response.
> @@ -101,7 +101,7 @@ QDict *qtest_qmp_fds(QTestState *s, int *fds, size_t 
> fds_num,
>   * qtest_qmp:
>   * @s: #QTestState instance to operate on.
>   * @fmt: QMP message to send to qemu, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   *
>   * Sends a QMP message to QEMU and returns the response.
> @@ -113,7 +113,7 @@ QDict *qtest_qmp(QTestState *s, const char *fmt, ...)
>   * qtest_qmp_send:
>   * @s: #QTestState instance to operate on.
>   * @fmt: QMP message to send to qemu, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   *
>   * Sends a QMP message to QEMU and leaves the response in the stream.
> @@ -138,7 +138,7 @@ void qtest_qmp_send_raw(QTestState *s, const char *fmt, 
> ...)
>   * @fds: array of file descriptors
>   * @fds_num: number of elements in @fds
>   * @fmt: QMP message to send to QEMU, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   * @ap: QMP message arguments
>   *
> @@ -152,7 +152,7 @@ QDict *qtest_vqmp_fds(QTestState *s, int *fds, size_t 
> fds_num,
>   * qtest_vqmp:
>   * @s: #QTestState instance to operate on.
>   * @fmt: QMP message to send to QEMU, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   * @ap: QMP message arguments
>   *
> @@ -167,7 +167,7 @@ QDict *qtest_vqmp(QTestState *s, const char *fmt, va_list 
> ap)
>   * @fds: array of file descriptors
>   * @fds_num: number of elements in @fds
>   * @fmt: QMP message to send to QEMU, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   * @ap: QMP message arguments
>   *
> @@ -181,7 +181,7 @@ void qtest_qmp_vsend_fds(QTestState *s, int *fds, size_t 
> fds_num,
>   * qtest_qmp_vsend:
>   * @s: #QTestState instance to operate on.
>   * @fmt: QMP message to send to QEMU, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   * @ap: QMP message arguments
>   *
> @@ -636,7 +636,7 @@ void qtest_add_abrt_handler(GHookFunc fn, const void 
> *data);
>   * qtest_qmp_assert_success:
>   * @qts: QTestState instance to operate on
>   * @fmt: QMP message to send to qemu, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   *
>   * Sends a QMP message to QEMU and asserts that a 'return' key is present in
> @@ -683,7 +683,7 @@ void qtest_qmp_device_add_qdict(QTestState *qts, const 
> char *drv,
>   * @driver: Name of the device that should be added
>   * @id: Identification string
>   * @fmt: QMP message to send to qemu, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   *
>   * Generic hot-plugging test via the device_add QMP command.
> diff --git a/tests/qtest/libqtest-single.h b/tests/qtest/libqtest-single.h
> index 176979a2ce9..0d7f568678e 100644
> --- a/tests/qtest/libqtest-single.h
> +++ b/tests/qtest/libqtest-single.h
> @@ -47,7 +47,7 @@ static inline void qtest_end(void)
>  /**
>   * qmp:
>   * @fmt...: QMP message to send to qemu, formatted like
> - * qobject_from_jsonf_nofail().  See parse_escape() for what's
> + * qobject_from_jsonf_nofail().  See parse_interpolation() for what's
>   * supported after '%'.
>   *
>   * Sends a QMP message to QEMU and returns the response.
> 

Reviewed-by: Thomas Huth <thuth@redhat.com>

... and queued for my next pull request.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]