[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 08/44] target/mips: Add loongson-ext lswc2 group of instructions (
From: |
Philippe Mathieu-Daudé |
Subject: |
[PULL 08/44] target/mips: Add loongson-ext lswc2 group of instructions (Part 1) |
Date: |
Sat, 17 Oct 2020 16:02:07 +0200 |
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE
as "load/store quad word" and "shifted load/store" groups of
instructions.
This patch add implementation of these instructions:
gslq: load 16 bytes to GPR
gssq: store 16 bytes from GPR
gslqc1: load 16 bytes to FPR
gssqc1: store 16 bytes from FPR
Details of Loongson-EXT is here:
https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1602831120-3377-3-git-send-email-chenhc@lemote.com>
[PMD: Restrict t1 variable to TARGET_MIPS64, remove unused t2/fp0]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
target/mips/translate.c | 86 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index b4d009078e0..e83954d782f 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -460,6 +460,17 @@ enum {
R6_OPC_SCD = 0x27 | OPC_SPECIAL3,
};
+/* Loongson EXT load/store quad word opcodes */
+#define MASK_LOONGSON_GSLSQ(op) (MASK_OP_MAJOR(op) | (op & 0x8020))
+enum {
+ OPC_GSLQ = 0x0020 | OPC_LWC2,
+ OPC_GSLQC1 = 0x8020 | OPC_LWC2,
+ OPC_GSSHFL = OPC_LWC2,
+ OPC_GSSQ = 0x0020 | OPC_SWC2,
+ OPC_GSSQC1 = 0x8020 | OPC_SWC2,
+ OPC_GSSHFS = OPC_SWC2,
+};
+
/* BSHFL opcodes */
#define MASK_BSHFL(op) (MASK_SPECIAL3(op) | (op & (0x1F << 6)))
@@ -5910,6 +5921,79 @@ no_rd:
tcg_temp_free_i64(t1);
}
+static void gen_loongson_lswc2(DisasContext *ctx, int rt,
+ int rs, int rd)
+{
+ TCGv t0;
+#if defined(TARGET_MIPS64)
+ TCGv t1;
+ int lsq_rt1 = ctx->opcode & 0x1f;
+ int lsq_offset = sextract32(ctx->opcode, 6, 9) << 4;
+#endif
+
+ t0 = tcg_temp_new();
+
+ switch (MASK_LOONGSON_GSLSQ(ctx->opcode)) {
+#if defined(TARGET_MIPS64)
+ case OPC_GSLQ:
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_store_gpr(t1, rt);
+ gen_store_gpr(t0, lsq_rt1);
+ tcg_temp_free(t1);
+ break;
+ case OPC_GSLQC1:
+ check_cp1_enabled(ctx);
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_store_fpr64(ctx, t1, rt);
+ gen_store_fpr64(ctx, t0, lsq_rt1);
+ tcg_temp_free(t1);
+ break;
+ case OPC_GSSQ:
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ gen_load_gpr(t1, rt);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ gen_load_gpr(t1, lsq_rt1);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ tcg_temp_free(t1);
+ break;
+ case OPC_GSSQC1:
+ check_cp1_enabled(ctx);
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ gen_load_fpr64(ctx, t1, rt);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ gen_load_fpr64(ctx, t1, lsq_rt1);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ tcg_temp_free(t1);
+ break;
+#endif
+ default:
+ MIPS_INVAL("loongson_gslsq");
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ tcg_temp_free(t0);
+}
+
/* Traps */
static void gen_trap(DisasContext *ctx, uint32_t opc,
int rs, int rt, int16_t imm)
@@ -30774,6 +30858,8 @@ static void decode_opc(CPUMIPSState *env, DisasContext
*ctx)
/* OPC_BC, OPC_BALC */
gen_compute_compact_branch(ctx, op, 0, 0,
sextract32(ctx->opcode << 2, 0, 28));
+ } else if (ctx->insn_flags & ASE_LEXT) {
+ gen_loongson_lswc2(ctx, rt, rs, rd);
} else {
/* OPC_LWC2, OPC_SWC2 */
/* COP2: Not implemented. */
--
2.26.2
- [PULL 01/44] util/cutils: Introduce freq_to_str() to display Hertz units, (continued)
- [PULL 01/44] util/cutils: Introduce freq_to_str() to display Hertz units, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 02/44] hw/qdev-clock: Display error hint when clock is missing from device, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 03/44] hw/core/clock: Add the clock_new helper function, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 04/44] target/mips: Fix some comment spelling errors, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 05/44] target/mips: Demacro helpers for <ABS|CHS>.<D|S|PS>, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 06/44] target/mips: Demacro helpers for M<ADD|SUB>F.<D|S>, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 07/44] target/mips: Demacro helpers for <MAX|MAXA|MIN|MINA>.<D|S>, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 09/44] target/mips: Add loongson-ext lswc2 group of instructions (Part 2), Philippe Mathieu-Daudé, 2020/10/17
- [PULL 11/44] target/mips/op_helper: Convert multiple if() to switch case, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 12/44] target/mips/op_helper: Document Invalidate/Writeback opcodes as no-op, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 08/44] target/mips: Add loongson-ext lswc2 group of instructions (Part 1),
Philippe Mathieu-Daudé <=
- [PULL 10/44] target/mips: Add loongson-ext lsdc2 group of instructions, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 13/44] target/mips/op_helper: Log unimplemented cache opcode, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 14/44] target/mips: Move cpu_mips_get_random() with CP0 helpers, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 15/44] target/mips/cp0_timer: Explicit unit in variable name, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 16/44] target/mips/cp0_timer: Document TIMER_PERIOD origin, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 17/44] target/mips: Move cp0_count_ns to CPUMIPSState, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 18/44] target/mips/cpu: Calculate the CP0 timer period using the CPU frequency, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 19/44] target/mips/cpu: Make cp0_count_rate a property, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 20/44] target/mips/cpu: Allow the CPU to use dynamic frequencies, Philippe Mathieu-Daudé, 2020/10/17
- [PULL 21/44] target/mips/cpu: Introduce mips_cpu_create_with_clock() helper, Philippe Mathieu-Daudé, 2020/10/17