[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH V13 4/9] target/mips: Add loongson-ext lswc2 group of instruction
From: |
Huacai Chen |
Subject: |
[PATCH V13 4/9] target/mips: Add loongson-ext lswc2 group of instructions (Part 1) |
Date: |
Wed, 7 Oct 2020 16:39:30 +0800 |
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
LWC2 & SWC2 have been rewritten by Loongson EXT vendor ASE
as "load/store quad word" and "shifted load/store" groups of
instructions.
This patch add implementation of these instructions:
gslq: load 16 bytes to GPR
gssq: store 16 bytes from GPR
gslqc1: load 16 bytes to FPR
gssqc1: store 16 bytes from FPR
Details of Loongson-EXT is here:
https://github.com/FlyGoat/loongson-insn/blob/master/loongson-ext.md
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
target/mips/translate.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 87 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 398edf7..cb0adde 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -460,6 +460,17 @@ enum {
R6_OPC_SCD = 0x27 | OPC_SPECIAL3,
};
+/* Loongson EXT load/store quad word opcodes */
+#define MASK_LOONGSON_GSLSQ(op) (MASK_OP_MAJOR(op) | (op & 0x8020))
+enum {
+ OPC_GSLQ = 0x0020 | OPC_LWC2,
+ OPC_GSLQC1 = 0x8020 | OPC_LWC2,
+ OPC_GSSHFL = OPC_LWC2,
+ OPC_GSSQ = 0x0020 | OPC_SWC2,
+ OPC_GSSQC1 = 0x8020 | OPC_SWC2,
+ OPC_GSSHFS = OPC_SWC2,
+};
+
/* BSHFL opcodes */
#define MASK_BSHFL(op) (MASK_SPECIAL3(op) | (op & (0x1F << 6)))
@@ -5910,6 +5921,80 @@ no_rd:
tcg_temp_free_i64(t1);
}
+static void gen_loongson_lswc2(DisasContext *ctx, int rt,
+ int rs, int rd)
+{
+ TCGv t0, t1, t2;
+ TCGv_i32 fp0;
+#if defined(TARGET_MIPS64)
+ int lsq_rt1 = ctx->opcode & 0x1f;
+ int lsq_offset = ((int)((ctx->opcode >> 6) & 0x1ff) << 23) >> 19;
+#endif
+ int shf_offset = (int8_t)(ctx->opcode >> 6);
+
+ t0 = tcg_temp_new();
+
+ switch (MASK_LOONGSON_GSLSQ(ctx->opcode)) {
+#if defined(TARGET_MIPS64)
+ case OPC_GSLQ:
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_store_gpr(t1, rt);
+ gen_store_gpr(t0, lsq_rt1);
+ tcg_temp_free(t1);
+ break;
+ case OPC_GSLQC1:
+ check_cp1_enabled(ctx);
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_store_fpr64(ctx, t1, rt);
+ gen_store_fpr64(ctx, t0, lsq_rt1);
+ tcg_temp_free(t1);
+ break;
+ case OPC_GSSQ:
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ gen_load_gpr(t1, rt);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ gen_load_gpr(t1, lsq_rt1);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ tcg_temp_free(t1);
+ break;
+ case OPC_GSSQC1:
+ check_cp1_enabled(ctx);
+ t1 = tcg_temp_new();
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset);
+ gen_load_fpr64(ctx, t1, rt);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ gen_base_offset_addr(ctx, t0, rs, lsq_offset + 8);
+ gen_load_fpr64(ctx, t1, lsq_rt1);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEQ |
+ ctx->default_tcg_memop_mask);
+ tcg_temp_free(t1);
+ break;
+#endif
+ default:
+ MIPS_INVAL("loongson_gslsq");
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ tcg_temp_free(t0);
+}
+
/* Traps */
static void gen_trap(DisasContext *ctx, uint32_t opc,
int rs, int rt, int16_t imm)
@@ -30774,6 +30859,8 @@ static void decode_opc(CPUMIPSState *env, DisasContext
*ctx)
/* OPC_BC, OPC_BALC */
gen_compute_compact_branch(ctx, op, 0, 0,
sextract32(ctx->opcode << 2, 0, 28));
+ } else if (ctx->insn_flags & ASE_LEXT) {
+ gen_loongson_lswc2(ctx, rt, rs, rd);
} else {
/* OPC_LWC2, OPC_SWC2 */
/* COP2: Not implemented. */
--
2.7.0
- [PATCH V13 0/9] mips: Add Loongson-3 machine support, Huacai Chen, 2020/10/07
- [PATCH V13 1/9] linux-headers: Update MIPS KVM type defintition, Huacai Chen, 2020/10/07
- [PATCH V13 2/9] meson.build: Re-enable KVM support for MIPS, Huacai Chen, 2020/10/07
- [PATCH V13 3/9] target/mips: Fix PageMask with variable page size, Huacai Chen, 2020/10/07
- [PATCH V13 4/9] target/mips: Add loongson-ext lswc2 group of instructions (Part 1),
Huacai Chen <=
- [PATCH V13 5/9] target/mips: Add loongson-ext lswc2 group of instructions (Part 2), Huacai Chen, 2020/10/07
- [PATCH V13 6/9] target/mips: Add loongson-ext lsdc2 group of instructions, Huacai Chen, 2020/10/07
[PATCH V13 7/9] hw/mips: Implement fw_cfg_arch_key_name(), Huacai Chen, 2020/10/07
[PATCH V13 8/9] hw/mips: Add Loongson-3 machine support, Huacai Chen, 2020/10/07