[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [External] Re: [PATCH] aspeed: Add support for the g220a-bmc board
From: |
王志强 |
Subject: |
Re: [External] Re: [PATCH] aspeed: Add support for the g220a-bmc board |
Date: |
Mon, 28 Sep 2020 17:18:37 +0800 |
Cédric Le Goater,
Sorry, I did not reply to all, this email is the same as the previous one.
On Mon, Sep 28, 2020 at 3:55 PM Cédric Le Goater <clg@kaod.org> wrote:
>
> On 9/28/20 8:12 AM, John Wang wrote:
> > G220A is a 2 socket x86 motherboard supported by OpenBMC.
> > Strapping configuration was obtained from hardware.
> >
> > Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>> ---
> > hw/arm/aspeed.c | 35 +++++++++++++++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> >
> > diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
> > index bdb981d2f8..1de61f7d4f 100644
> > --- a/hw/arm/aspeed.c
> > +++ b/hw/arm/aspeed.c
> > @@ -120,6 +120,20 @@ struct AspeedMachineState {
> > SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
> > SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
> >
> > +#define G220A_BMC_HW_STRAP1 ( \
> > + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
> > + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
> > + SCU_AST2500_HW_STRAP_UART_DEBUG | \
> > + SCU_AST2500_HW_STRAP_RESERVED28 | \
> > + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
> > + SCU_HW_STRAP_2ND_BOOT_WDT | \
> > + SCU_HW_STRAP_VGA_CLASS_CODE | \
> > + SCU_HW_STRAP_LPC_RESET_PIN | \
> > + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \
> > + SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \
> > + SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \
> > + SCU_AST2500_HW_STRAP_RESERVED1)
> > +
> > /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
> > #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
> >
> > @@ -798,6 +812,23 @@ static void
> > aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data)
> > aspeed_soc_num_cpus(amc->soc_name);
> > };
> >
> > +static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data)
> > +{
> > + MachineClass *mc = MACHINE_CLASS(oc);
> > + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
> > +
> > + mc->desc = "Bytedance G220A BMC (ARM1176)";
> > + amc->soc_name = "ast2500-a1";
> > + amc->hw_strap1 = G220A_BMC_HW_STRAP1;
> > + amc->fmc_model = "n25q512a";
> > + amc->spi_model = "mx25l25635e";
> > + amc->num_cs = 2;
>
> 'macs_mask' is missing. You won't get network.
Will Fix
>
> > + amc->i2c_init = NULL;
>
> Isn't it possible to add some default I2C devices ? temperature sensors ?
hmm, G220A BMC uses emc1413 as the temperature sensor. I can not find
it in qemu.
I can't find an i2c chip that qemu has and that the g220a uses. :(
>
> Thanks,
>
> C.
>
> > + mc->default_ram_size = 1024 * MiB;
> > + mc->default_cpus = mc->min_cpus = mc->max_cpus =
> > + aspeed_soc_num_cpus(amc->soc_name);
> > +};
> > +
> > static const TypeInfo aspeed_machine_types[] = {
> > {
> > .name = MACHINE_TYPE_NAME("palmetto-bmc"),
> > @@ -835,6 +866,10 @@ static const TypeInfo aspeed_machine_types[] = {
> > .name = MACHINE_TYPE_NAME("tacoma-bmc"),
> > .parent = TYPE_ASPEED_MACHINE,
> > .class_init = aspeed_machine_tacoma_class_init,
> > + }, {
> > + .name = MACHINE_TYPE_NAME("g220a-bmc"),
> > + .parent = TYPE_ASPEED_MACHINE,
> > + .class_init = aspeed_machine_g220a_class_init,
> > }, {
> > .name = TYPE_ASPEED_MACHINE,
> > .parent = TYPE_MACHINE,
> >
>