[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v8 01/17] cpu-timers, icount: new modules
|
From: |
Claudio Fontana |
|
Subject: |
[PATCH v8 01/17] cpu-timers, icount: new modules |
|
Date: |
Wed, 16 Sep 2020 16:19:48 +0200 |
refactoring of cpus.c continues with cpu timer state extraction.
cpu-timers: responsible for the softmmu cpu timers state,
including cpu clocks and ticks.
icount: counts the TCG instructions executed. As such it is specific to
the TCG accelerator. Therefore, it is built only under CONFIG_TCG.
One complication is due to qtest, which uses an icount field to warp time
as part of qtest (qtest_clock_warp).
In order to solve this problem, provide a separate counter for qtest.
This requires fixing assumptions scattered in the code that
qtest_enabled() implies icount_enabled(), checking each specific case.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[remove redundant initialization with qemu_spice_init]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[fix lingering calls to icount_get]
Signed-off-by: Claudio Fontana <cfontana@suse.de>
---
MAINTAINERS | 2 +
accel/qtest.c | 6 +-
accel/tcg/cpu-exec.c | 39 +-
accel/tcg/tcg-all.c | 7 +-
accel/tcg/translate-all.c | 3 +-
dma-helpers.c | 4 +-
exec.c | 4 -
hw/core/ptimer.c | 8 +-
hw/i386/x86.c | 1 +
include/exec/cpu-all.h | 4 +
include/exec/exec-all.h | 4 +-
include/qemu/timer.h | 24 +-
include/sysemu/cpu-timers.h | 87 ++++
include/sysemu/cpus.h | 12 +-
include/sysemu/qtest.h | 2 +
replay/replay.c | 4 +-
softmmu/cpu-timers.c | 284 +++++++++++++
softmmu/cpus.c | 744 +----------------------------------
softmmu/icount.c | 492 +++++++++++++++++++++++
softmmu/meson.build | 10 +-
softmmu/qtest.c | 34 +-
softmmu/timers-state.h | 69 ++++
softmmu/vl.c | 6 +-
stubs/clock-warp.c | 7 -
stubs/cpu-get-clock.c | 3 +-
stubs/cpu-get-icount.c | 16 -
stubs/icount.c | 45 +++
stubs/meson.build | 4 +-
stubs/qemu-timer-notify-cb.c | 2 +-
stubs/qtest.c | 5 +
target/alpha/translate.c | 3 +-
target/arm/helper.c | 3 +-
target/riscv/csr.c | 4 +-
tests/ptimer-test-stubs.c | 5 +-
tests/test-timed-average.c | 2 +-
util/main-loop.c | 12 +-
util/qemu-timer.c | 10 +-
37 files changed, 1128 insertions(+), 843 deletions(-)
create mode 100644 include/sysemu/cpu-timers.h
create mode 100644 softmmu/cpu-timers.c
create mode 100644 softmmu/icount.c
create mode 100644 softmmu/timers-state.h
delete mode 100644 stubs/clock-warp.c
delete mode 100644 stubs/cpu-get-icount.c
create mode 100644 stubs/icount.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d17cad19a..dbca9e67c6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2308,6 +2308,8 @@ F: softmmu/vl.c
F: softmmu/main.c
F: softmmu/cpus.c
F: softmmu/cpu-throttle.c
+F: softmmu/cpu-timers.c
+F: softmmu/icount.c
F: qapi/run-state.json
Human Monitor (HMP)
diff --git a/accel/qtest.c b/accel/qtest.c
index 5b88f55921..119d0f16a4 100644
--- a/accel/qtest.c
+++ b/accel/qtest.c
@@ -19,14 +19,10 @@
#include "sysemu/accel.h"
#include "sysemu/qtest.h"
#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
static int qtest_init_accel(MachineState *ms)
{
- QemuOpts *opts = qemu_opts_create(qemu_find_opts("icount"), NULL, 0,
- &error_abort);
- qemu_opt_set(opts, "shift", "0", &error_abort);
- configure_icount(opts, &error_abort);
- qemu_opts_del(opts);
return 0;
}
diff --git a/accel/tcg/cpu-exec.c b/accel/tcg/cpu-exec.c
index 66d38f9d85..ee9d22d92c 100644
--- a/accel/tcg/cpu-exec.c
+++ b/accel/tcg/cpu-exec.c
@@ -19,6 +19,7 @@
#include "qemu/osdep.h"
#include "qemu-common.h"
+#include "qemu/qemu-print.h"
#include "cpu.h"
#include "trace.h"
#include "disas/disas.h"
@@ -36,6 +37,8 @@
#include "hw/i386/apic.h"
#endif
#include "sysemu/cpus.h"
+#include "exec/cpu-all.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/replay.h"
/* -icount align implementation. */
@@ -56,6 +59,9 @@ typedef struct SyncClocks {
#define MAX_DELAY_PRINT_RATE 2000000000LL
#define MAX_NB_PRINTS 100
+static int64_t max_delay;
+static int64_t max_advance;
+
static void align_clocks(SyncClocks *sc, CPUState *cpu)
{
int64_t cpu_icount;
@@ -98,9 +104,9 @@ static void print_delay(const SyncClocks *sc)
(-sc->diff_clk / (float)1000000000LL <
(threshold_delay - THRESHOLD_REDUCE))) {
threshold_delay = (-sc->diff_clk / 1000000000LL) + 1;
- printf("Warning: The guest is now late by %.1f to %.1f seconds\n",
- threshold_delay - 1,
- threshold_delay);
+ qemu_printf("Warning: The guest is now late by %.1f to %.1f
seconds\n",
+ threshold_delay - 1,
+ threshold_delay);
nb_prints++;
last_realtime_clock = sc->realtime_clock;
}
@@ -614,7 +620,7 @@ static inline bool cpu_handle_interrupt(CPUState *cpu,
/* Finally, check if we need to exit to the main loop. */
if (unlikely(atomic_read(&cpu->exit_request))
- || (use_icount
+ || (icount_enabled()
&& cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra == 0)) {
atomic_set(&cpu->exit_request, 0);
if (cpu->exception_index == -1) {
@@ -655,7 +661,7 @@ static inline void cpu_loop_exec_tb(CPUState *cpu,
TranslationBlock *tb,
}
/* Instruction counter expired. */
- assert(use_icount);
+ assert(icount_enabled());
#ifndef CONFIG_USER_ONLY
/* Ensure global icount has gone forward */
cpu_update_icount(cpu);
@@ -758,3 +764,26 @@ int cpu_exec(CPUState *cpu)
return ret;
}
+
+#ifndef CONFIG_USER_ONLY
+
+void dump_drift_info(void)
+{
+ if (!icount_enabled()) {
+ return;
+ }
+
+ qemu_printf("Host - Guest clock %"PRIi64" ms\n",
+ (cpu_get_clock() - cpu_get_icount()) / SCALE_MS);
+ if (icount_align_option) {
+ qemu_printf("Max guest delay %"PRIi64" ms\n",
+ -max_delay / SCALE_MS);
+ qemu_printf("Max guest advance %"PRIi64" ms\n",
+ max_advance / SCALE_MS);
+ } else {
+ qemu_printf("Max guest delay NA\n");
+ qemu_printf("Max guest advance NA\n");
+ }
+}
+
+#endif /* !CONFIG_USER_ONLY */
diff --git a/accel/tcg/tcg-all.c b/accel/tcg/tcg-all.c
index 7098ad96c3..e064065962 100644
--- a/accel/tcg/tcg-all.c
+++ b/accel/tcg/tcg-all.c
@@ -29,6 +29,7 @@
#include "qom/object.h"
#include "cpu.h"
#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "qemu/main-loop.h"
#include "tcg/tcg.h"
#include "qapi/error.h"
@@ -66,7 +67,7 @@ static void tcg_handle_interrupt(CPUState *cpu, int mask)
qemu_cpu_kick(cpu);
} else {
atomic_set(&cpu_neg(cpu)->icount_decr.u16.high, -1);
- if (use_icount &&
+ if (icount_enabled() &&
!cpu->can_do_io
&& (mask & ~old_mask) != 0) {
cpu_abort(cpu, "Raised interrupt while not in I/O function");
@@ -105,7 +106,7 @@ static bool check_tcg_memory_orders_compatible(void)
static bool default_mttcg_enabled(void)
{
- if (use_icount || TCG_OVERSIZED_GUEST) {
+ if (icount_enabled() || TCG_OVERSIZED_GUEST) {
return false;
} else {
#ifdef TARGET_SUPPORTS_MTTCG
@@ -147,7 +148,7 @@ static void tcg_set_thread(Object *obj, const char *value,
Error **errp)
if (strcmp(value, "multi") == 0) {
if (TCG_OVERSIZED_GUEST) {
error_setg(errp, "No MTTCG when guest word size > hosts");
- } else if (use_icount) {
+ } else if (icount_enabled()) {
error_setg(errp, "No MTTCG when icount is enabled");
} else {
#ifndef TARGET_SUPPORTS_MTTCG
diff --git a/accel/tcg/translate-all.c b/accel/tcg/translate-all.c
index 2d83013633..c39ff7b047 100644
--- a/accel/tcg/translate-all.c
+++ b/accel/tcg/translate-all.c
@@ -57,6 +57,7 @@
#include "qemu/main-loop.h"
#include "exec/log.h"
#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/tcg.h"
/* #define DEBUG_TB_INVALIDATE */
@@ -369,7 +370,7 @@ static int cpu_restore_state_from_tb(CPUState *cpu,
TranslationBlock *tb,
found:
if (reset_icount && (tb_cflags(tb) & CF_USE_ICOUNT)) {
- assert(use_icount);
+ assert(icount_enabled());
/* Reset the cycle counter to the start of the block
and shift if to the number of actually executed instructions */
cpu_neg(cpu)->icount_decr.u16.low += num_insns - i;
diff --git a/dma-helpers.c b/dma-helpers.c
index 41ef24a63b..03c92e0cc6 100644
--- a/dma-helpers.c
+++ b/dma-helpers.c
@@ -13,7 +13,7 @@
#include "trace/trace-root.h"
#include "qemu/thread.h"
#include "qemu/main-loop.h"
-#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "qemu/range.h"
/* #define DEBUG_IOMMU */
@@ -151,7 +151,7 @@ static void dma_blk_cb(void *opaque, int ret)
* from several sectors. This code splits all SGs into several
* groups. SGs in every group do not overlap.
*/
- if (mem && use_icount && dbs->dir == DMA_DIRECTION_FROM_DEVICE) {
+ if (mem && icount_enabled() && dbs->dir == DMA_DIRECTION_FROM_DEVICE) {
int i;
for (i = 0 ; i < dbs->iov.niov ; ++i) {
if (ranges_overlap((intptr_t)dbs->iov.iov[i].iov_base,
diff --git a/exec.c b/exec.c
index e34b602bdf..cfe7d0e935 100644
--- a/exec.c
+++ b/exec.c
@@ -102,10 +102,6 @@ uintptr_t qemu_host_page_size;
intptr_t qemu_host_page_mask;
#if !defined(CONFIG_USER_ONLY)
-/* 0 = Do not count executed instructions.
- 1 = Precise instruction counting.
- 2 = Adaptive rate instruction counting. */
-int use_icount;
typedef struct PhysPageEntry PhysPageEntry;
diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c
index b5a54e2536..c6d2beb1da 100644
--- a/hw/core/ptimer.c
+++ b/hw/core/ptimer.c
@@ -7,11 +7,11 @@
*/
#include "qemu/osdep.h"
-#include "qemu/timer.h"
#include "hw/ptimer.h"
#include "migration/vmstate.h"
#include "qemu/host-utils.h"
#include "sysemu/replay.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/qtest.h"
#include "block/aio.h"
#include "sysemu/cpus.h"
@@ -134,7 +134,8 @@ static void ptimer_reload(ptimer_state *s, int delta_adjust)
* on the current generation of host machines.
*/
- if (s->enabled == 1 && (delta * period < 10000) && !use_icount) {
+ if (s->enabled == 1 && (delta * period < 10000) &&
+ !icount_enabled() && !qtest_enabled()) {
period = 10000 / delta;
period_frac = 0;
}
@@ -217,7 +218,8 @@ uint64_t ptimer_get_count(ptimer_state *s)
uint32_t period_frac = s->period_frac;
uint64_t period = s->period;
- if (!oneshot && (s->delta * period < 10000) && !use_icount) {
+ if (!oneshot && (s->delta * period < 10000) &&
+ !icount_enabled() && !qtest_enabled()) {
period = 10000 / s->delta;
period_frac = 0;
}
diff --git a/hw/i386/x86.c b/hw/i386/x86.c
index c1954db152..309632c948 100644
--- a/hw/i386/x86.c
+++ b/hw/i386/x86.c
@@ -34,6 +34,7 @@
#include "sysemu/numa.h"
#include "sysemu/replay.h"
#include "sysemu/sysemu.h"
+#include "sysemu/cpu-timers.h"
#include "trace.h"
#include "hw/i386/x86.h"
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h
index f6439c4705..61e13b5038 100644
--- a/include/exec/cpu-all.h
+++ b/include/exec/cpu-all.h
@@ -407,8 +407,12 @@ static inline bool tlb_hit(target_ulong tlb_addr,
target_ulong addr)
return tlb_hit_page(tlb_addr, addr & TARGET_PAGE_MASK);
}
+#ifdef CONFIG_TCG
+void dump_drift_info(void);
void dump_exec_info(void);
void dump_opcount_info(void);
+#endif /* CONFIG_TCG */
+
#endif /* !CONFIG_USER_ONLY */
/* Returns: 0 on success, -1 on error */
diff --git a/include/exec/exec-all.h b/include/exec/exec-all.h
index 3cf88272df..e019b505a5 100644
--- a/include/exec/exec-all.h
+++ b/include/exec/exec-all.h
@@ -25,7 +25,7 @@
#ifdef CONFIG_TCG
#include "exec/cpu_ldst.h"
#endif
-#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
/* allow to see translation results - the slowdown should be negligible, so we
leave it */
#define DEBUG_DISAS
@@ -497,7 +497,7 @@ static inline uint32_t tb_cflags(const TranslationBlock *tb)
static inline uint32_t curr_cflags(void)
{
return (parallel_cpus ? CF_PARALLEL : 0)
- | (use_icount ? CF_USE_ICOUNT : 0);
+ | (icount_enabled() ? CF_USE_ICOUNT : 0);
}
/* TranslationBlock invalidate API */
diff --git a/include/qemu/timer.h b/include/qemu/timer.h
index 6a8b48b5a9..2f7afc1f68 100644
--- a/include/qemu/timer.h
+++ b/include/qemu/timer.h
@@ -166,8 +166,8 @@ bool qemu_clock_expired(QEMUClockType type);
*
* Determine whether a clock should be used for deadline
* calculations. Some clocks, for instance vm_clock with
- * use_icount set, do not count in nanoseconds. Such clocks
- * are not used for deadline calculations, and are presumed
+ * icount_enabled() set, do not count in nanoseconds.
+ * Such clocks are not used for deadline calculations, and are presumed
* to interrupt any poll using qemu_notify/aio_notify
* etc.
*
@@ -224,13 +224,6 @@ void qemu_clock_notify(QEMUClockType type);
*/
void qemu_clock_enable(QEMUClockType type, bool enabled);
-/**
- * qemu_start_warp_timer:
- *
- * Starts a timer for virtual clock update
- */
-void qemu_start_warp_timer(void);
-
/**
* qemu_clock_run_timers:
* @type: clock on which to operate
@@ -791,12 +784,6 @@ static inline int64_t qemu_soonest_timeout(int64_t
timeout1, int64_t timeout2)
*/
void init_clocks(QEMUTimerListNotifyCB *notify_cb);
-int64_t cpu_get_ticks(void);
-/* Caller must hold BQL */
-void cpu_enable_ticks(void);
-/* Caller must hold BQL */
-void cpu_disable_ticks(void);
-
static inline int64_t get_max_clock_jump(void)
{
/* This should be small enough to prevent excessive interrupts from being
@@ -850,13 +837,6 @@ static inline int64_t get_clock(void)
}
#endif
-/* icount */
-int64_t cpu_get_icount_raw(void);
-int64_t cpu_get_icount(void);
-int64_t cpu_get_clock(void);
-int64_t cpu_icount_to_ns(int64_t icount);
-void cpu_update_icount(CPUState *cpu);
-
/*******************************************/
/* host CPU ticks (if available) */
diff --git a/include/sysemu/cpu-timers.h b/include/sysemu/cpu-timers.h
new file mode 100644
index 0000000000..4b621fea51
--- /dev/null
+++ b/include/sysemu/cpu-timers.h
@@ -0,0 +1,87 @@
+/*
+ * CPU timers state API
+ *
+ * Copyright 2020 SUSE LLC
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+#ifndef SYSEMU_CPU_TIMERS_H
+#define SYSEMU_CPU_TIMERS_H
+
+#include "qemu/timer.h"
+
+/* init the whole cpu timers API, including icount, ticks, and cpu_throttle */
+void cpu_timers_init(void);
+
+/* icount - Instruction Counter API */
+
+/*
+ * icount enablement state:
+ *
+ * 0 = Disabled - Do not count executed instructions.
+ * 1 = Enabled - Fixed conversion of insn to ns via "shift" option
+ * 2 = Enabled - Runtime adaptive algorithm to compute shift
+ */
+#ifdef CONFIG_TCG
+extern int use_icount;
+#define icount_enabled() (use_icount)
+#else
+#define icount_enabled() 0
+#endif
+
+/*
+ * Update the icount with the executed instructions. Called by
+ * cpus-tcg vCPU thread so the main-loop can see time has moved forward.
+ */
+void cpu_update_icount(CPUState *cpu);
+
+/* get raw icount value */
+int64_t cpu_get_icount_raw(void);
+
+/* return the virtual CPU time in ns, based on the instruction counter. */
+int64_t cpu_get_icount(void);
+/*
+ * convert an instruction counter value to ns, based on the icount shift.
+ * This shift is set as a fixed value with the icount "shift" option
+ * (precise mode), or it is constantly approximated and corrected at
+ * runtime in adaptive mode.
+ */
+int64_t cpu_icount_to_ns(int64_t icount);
+
+/* configure the icount options, including "shift" */
+void configure_icount(QemuOpts *opts, Error **errp);
+
+/* used by tcg vcpu thread to calc icount budget */
+int64_t qemu_icount_round(int64_t count);
+
+/* if the CPUs are idle, start accounting real time to virtual clock. */
+void qemu_start_warp_timer(void);
+void qemu_account_warp_timer(void);
+
+/*
+ * CPU Ticks and Clock
+ */
+
+/* Caller must hold BQL */
+void cpu_enable_ticks(void);
+/* Caller must hold BQL */
+void cpu_disable_ticks(void);
+
+/*
+ * return the time elapsed in VM between vm_start and vm_stop. Unless
+ * icount is active, cpu_get_ticks() uses units of the host CPU cycle
+ * counter.
+ */
+int64_t cpu_get_ticks(void);
+
+/*
+ * Returns the monotonic time elapsed in VM, i.e.,
+ * the time between vm_start and vm_stop
+ */
+int64_t cpu_get_clock(void);
+
+void qemu_timer_notify_cb(void *opaque, QEMUClockType type);
+
+#endif /* SYSEMU_CPU_TIMERS_H */
diff --git a/include/sysemu/cpus.h b/include/sysemu/cpus.h
index 3c1da6a018..149de000a0 100644
--- a/include/sysemu/cpus.h
+++ b/include/sysemu/cpus.h
@@ -4,33 +4,23 @@
#include "qemu/timer.h"
/* cpus.c */
+bool all_cpu_threads_idle(void);
bool qemu_in_vcpu_thread(void);
void qemu_init_cpu_loop(void);
void resume_all_vcpus(void);
void pause_all_vcpus(void);
void cpu_stop_current(void);
-void cpu_ticks_init(void);
-void configure_icount(QemuOpts *opts, Error **errp);
-extern int use_icount;
extern int icount_align_option;
-/* drift information for info jit command */
-extern int64_t max_delay;
-extern int64_t max_advance;
-void dump_drift_info(void);
-
/* Unblock cpu */
void qemu_cpu_kick_self(void);
-void qemu_timer_notify_cb(void *opaque, QEMUClockType type);
void cpu_synchronize_all_states(void);
void cpu_synchronize_all_post_reset(void);
void cpu_synchronize_all_post_init(void);
void cpu_synchronize_all_pre_loadvm(void);
-void qtest_clock_warp(int64_t dest);
-
#ifndef CONFIG_USER_ONLY
/* vl.c */
/* *-user doesn't have configurable SMP topology */
diff --git a/include/sysemu/qtest.h b/include/sysemu/qtest.h
index eedd3664f0..4c53537ef3 100644
--- a/include/sysemu/qtest.h
+++ b/include/sysemu/qtest.h
@@ -30,4 +30,6 @@ void qtest_server_set_send_handler(void (*send)(void *, const
char *),
void *opaque);
void qtest_server_inproc_recv(void *opaque, const char *buf);
+int64_t qtest_get_virtual_clock(void);
+
#endif
diff --git a/replay/replay.c b/replay/replay.c
index 83ed9e0e24..7e4a1ba78e 100644
--- a/replay/replay.c
+++ b/replay/replay.c
@@ -11,10 +11,10 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/replay.h"
#include "sysemu/runstate.h"
#include "replay-internal.h"
-#include "qemu/timer.h"
#include "qemu/main-loop.h"
#include "qemu/option.h"
#include "sysemu/cpus.h"
@@ -345,7 +345,7 @@ void replay_start(void)
error_reportf_err(replay_blockers->data, "Record/replay: ");
exit(1);
}
- if (!use_icount) {
+ if (!icount_enabled()) {
error_report("Please enable icount to use record/replay");
exit(1);
}
diff --git a/softmmu/cpu-timers.c b/softmmu/cpu-timers.c
new file mode 100644
index 0000000000..6c6c56090f
--- /dev/null
+++ b/softmmu/cpu-timers.c
@@ -0,0 +1,284 @@
+/*
+ * QEMU System Emulator
+ *
+ * Copyright (c) 2003-2008 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/cutils.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "exec/exec-all.h"
+#include "sysemu/cpus.h"
+#include "sysemu/qtest.h"
+#include "qemu/main-loop.h"
+#include "qemu/option.h"
+#include "qemu/seqlock.h"
+#include "sysemu/replay.h"
+#include "sysemu/runstate.h"
+#include "hw/core/cpu.h"
+#include "sysemu/cpu-timers.h"
+#include "sysemu/cpu-throttle.h"
+#include "timers-state.h"
+
+/* clock and ticks */
+
+static int64_t cpu_get_ticks_locked(void)
+{
+ int64_t ticks = timers_state.cpu_ticks_offset;
+ if (timers_state.cpu_ticks_enabled) {
+ ticks += cpu_get_host_ticks();
+ }
+
+ if (timers_state.cpu_ticks_prev > ticks) {
+ /* Non increasing ticks may happen if the host uses software suspend.
*/
+ timers_state.cpu_ticks_offset += timers_state.cpu_ticks_prev - ticks;
+ ticks = timers_state.cpu_ticks_prev;
+ }
+
+ timers_state.cpu_ticks_prev = ticks;
+ return ticks;
+}
+
+/*
+ * return the time elapsed in VM between vm_start and vm_stop. Unless
+ * icount is active, cpu_get_ticks() uses units of the host CPU cycle
+ * counter.
+ */
+int64_t cpu_get_ticks(void)
+{
+ int64_t ticks;
+
+ if (icount_enabled()) {
+ return cpu_get_icount();
+ }
+
+ qemu_spin_lock(&timers_state.vm_clock_lock);
+ ticks = cpu_get_ticks_locked();
+ qemu_spin_unlock(&timers_state.vm_clock_lock);
+ return ticks;
+}
+
+int64_t cpu_get_clock_locked(void)
+{
+ int64_t time;
+
+ time = timers_state.cpu_clock_offset;
+ if (timers_state.cpu_ticks_enabled) {
+ time += get_clock();
+ }
+
+ return time;
+}
+
+/*
+ * Return the monotonic time elapsed in VM, i.e.,
+ * the time between vm_start and vm_stop
+ */
+int64_t cpu_get_clock(void)
+{
+ int64_t ti;
+ unsigned start;
+
+ do {
+ start = seqlock_read_begin(&timers_state.vm_clock_seqlock);
+ ti = cpu_get_clock_locked();
+ } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, start));
+
+ return ti;
+}
+
+/*
+ * enable cpu_get_ticks()
+ * Caller must hold BQL which serves as mutex for vm_clock_seqlock.
+ */
+void cpu_enable_ticks(void)
+{
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ if (!timers_state.cpu_ticks_enabled) {
+ timers_state.cpu_ticks_offset -= cpu_get_host_ticks();
+ timers_state.cpu_clock_offset -= get_clock();
+ timers_state.cpu_ticks_enabled = 1;
+ }
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+}
+
+/*
+ * disable cpu_get_ticks() : the clock is stopped. You must not call
+ * cpu_get_ticks() after that.
+ * Caller must hold BQL which serves as mutex for vm_clock_seqlock.
+ */
+void cpu_disable_ticks(void)
+{
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ if (timers_state.cpu_ticks_enabled) {
+ timers_state.cpu_ticks_offset += cpu_get_host_ticks();
+ timers_state.cpu_clock_offset = cpu_get_clock_locked();
+ timers_state.cpu_ticks_enabled = 0;
+ }
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+}
+
+static bool icount_state_needed(void *opaque)
+{
+ return icount_enabled();
+}
+
+static bool warp_timer_state_needed(void *opaque)
+{
+ TimersState *s = opaque;
+ return s->icount_warp_timer != NULL;
+}
+
+static bool adjust_timers_state_needed(void *opaque)
+{
+ TimersState *s = opaque;
+ return s->icount_rt_timer != NULL;
+}
+
+static bool shift_state_needed(void *opaque)
+{
+ return icount_enabled() == 2;
+}
+
+/*
+ * Subsection for warp timer migration is optional, because may not be created
+ */
+static const VMStateDescription icount_vmstate_warp_timer = {
+ .name = "timer/icount/warp_timer",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .needed = warp_timer_state_needed,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT64(vm_clock_warp_start, TimersState),
+ VMSTATE_TIMER_PTR(icount_warp_timer, TimersState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription icount_vmstate_adjust_timers = {
+ .name = "timer/icount/timers",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .needed = adjust_timers_state_needed,
+ .fields = (VMStateField[]) {
+ VMSTATE_TIMER_PTR(icount_rt_timer, TimersState),
+ VMSTATE_TIMER_PTR(icount_vm_timer, TimersState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription icount_vmstate_shift = {
+ .name = "timer/icount/shift",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .needed = shift_state_needed,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT16(icount_time_shift, TimersState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+/*
+ * This is a subsection for icount migration.
+ */
+static const VMStateDescription icount_vmstate_timers = {
+ .name = "timer/icount",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .needed = icount_state_needed,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT64(qemu_icount_bias, TimersState),
+ VMSTATE_INT64(qemu_icount, TimersState),
+ VMSTATE_END_OF_LIST()
+ },
+ .subsections = (const VMStateDescription * []) {
+ &icount_vmstate_warp_timer,
+ &icount_vmstate_adjust_timers,
+ &icount_vmstate_shift,
+ NULL
+ }
+};
+
+static const VMStateDescription vmstate_timers = {
+ .name = "timer",
+ .version_id = 2,
+ .minimum_version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_INT64(cpu_ticks_offset, TimersState),
+ VMSTATE_UNUSED(8),
+ VMSTATE_INT64_V(cpu_clock_offset, TimersState, 2),
+ VMSTATE_END_OF_LIST()
+ },
+ .subsections = (const VMStateDescription * []) {
+ &icount_vmstate_timers,
+ NULL
+ }
+};
+
+static void do_nothing(CPUState *cpu, run_on_cpu_data unused)
+{
+}
+
+void qemu_timer_notify_cb(void *opaque, QEMUClockType type)
+{
+ if (!icount_enabled() || type != QEMU_CLOCK_VIRTUAL) {
+ qemu_notify_event();
+ return;
+ }
+
+ if (qemu_in_vcpu_thread()) {
+ /*
+ * A CPU is currently running; kick it back out to the
+ * tcg_cpu_exec() loop so it will recalculate its
+ * icount deadline immediately.
+ */
+ qemu_cpu_kick(current_cpu);
+ } else if (first_cpu) {
+ /*
+ * qemu_cpu_kick is not enough to kick a halted CPU out of
+ * qemu_tcg_wait_io_event. async_run_on_cpu, instead,
+ * causes cpu_thread_is_idle to return false. This way,
+ * handle_icount_deadline can run.
+ * If we have no CPUs at all for some reason, we don't
+ * need to do anything.
+ */
+ async_run_on_cpu(first_cpu, do_nothing, RUN_ON_CPU_NULL);
+ }
+}
+
+TimersState timers_state;
+
+/* initialize timers state and the cpu throttle for convenience */
+void cpu_timers_init(void)
+{
+ seqlock_init(&timers_state.vm_clock_seqlock);
+ qemu_spin_init(&timers_state.vm_clock_lock);
+ vmstate_register(NULL, 0, &vmstate_timers, &timers_state);
+
+ cpu_throttle_init();
+}
diff --git a/softmmu/cpus.c b/softmmu/cpus.c
index e3b98065c9..1ec713923f 100644
--- a/softmmu/cpus.c
+++ b/softmmu/cpus.c
@@ -58,11 +58,10 @@
#include "hw/nmi.h"
#include "sysemu/replay.h"
#include "sysemu/runstate.h"
+#include "sysemu/cpu-timers.h"
#include "hw/boards.h"
#include "hw/hw.h"
-#include "sysemu/cpu-throttle.h"
-
#ifdef CONFIG_LINUX
#include <sys/prctl.h>
@@ -83,9 +82,6 @@
static QemuMutex qemu_global_mutex;
-int64_t max_delay;
-int64_t max_advance;
-
bool cpu_is_stopped(CPUState *cpu)
{
return cpu->stopped || !runstate_is_running();
@@ -116,7 +112,7 @@ static bool cpu_thread_is_idle(CPUState *cpu)
return true;
}
-static bool all_cpu_threads_idle(void)
+bool all_cpu_threads_idle(void)
{
CPUState *cpu;
@@ -128,688 +124,9 @@ static bool all_cpu_threads_idle(void)
return true;
}
-/***********************************************************/
-/* guest cycle counter */
-
-/* Protected by TimersState seqlock */
-
-static bool icount_sleep = true;
-/* Arbitrarily pick 1MIPS as the minimum allowable speed. */
-#define MAX_ICOUNT_SHIFT 10
-
-typedef struct TimersState {
- /* Protected by BQL. */
- int64_t cpu_ticks_prev;
- int64_t cpu_ticks_offset;
-
- /* Protect fields that can be respectively read outside the
- * BQL, and written from multiple threads.
- */
- QemuSeqLock vm_clock_seqlock;
- QemuSpin vm_clock_lock;
-
- int16_t cpu_ticks_enabled;
-
- /* Conversion factor from emulated instructions to virtual clock ticks. */
- int16_t icount_time_shift;
-
- /* Compensate for varying guest execution speed. */
- int64_t qemu_icount_bias;
-
- int64_t vm_clock_warp_start;
- int64_t cpu_clock_offset;
-
- /* Only written by TCG thread */
- int64_t qemu_icount;
-
- /* for adjusting icount */
- QEMUTimer *icount_rt_timer;
- QEMUTimer *icount_vm_timer;
- QEMUTimer *icount_warp_timer;
-} TimersState;
-
-static TimersState timers_state;
bool mttcg_enabled;
-/* The current number of executed instructions is based on what we
- * originally budgeted minus the current state of the decrementing
- * icount counters in extra/u16.low.
- */
-static int64_t cpu_get_icount_executed(CPUState *cpu)
-{
- return (cpu->icount_budget -
- (cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra));
-}
-
-/*
- * Update the global shared timer_state.qemu_icount to take into
- * account executed instructions. This is done by the TCG vCPU
- * thread so the main-loop can see time has moved forward.
- */
-static void cpu_update_icount_locked(CPUState *cpu)
-{
- int64_t executed = cpu_get_icount_executed(cpu);
- cpu->icount_budget -= executed;
-
- atomic_set_i64(&timers_state.qemu_icount,
- timers_state.qemu_icount + executed);
-}
-
-/*
- * Update the global shared timer_state.qemu_icount to take into
- * account executed instructions. This is done by the TCG vCPU
- * thread so the main-loop can see time has moved forward.
- */
-void cpu_update_icount(CPUState *cpu)
-{
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- cpu_update_icount_locked(cpu);
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
-}
-
-static int64_t cpu_get_icount_raw_locked(void)
-{
- CPUState *cpu = current_cpu;
-
- if (cpu && cpu->running) {
- if (!cpu->can_do_io) {
- error_report("Bad icount read");
- exit(1);
- }
- /* Take into account what has run */
- cpu_update_icount_locked(cpu);
- }
- /* The read is protected by the seqlock, but needs atomic64 to avoid UB */
- return atomic_read_i64(&timers_state.qemu_icount);
-}
-
-static int64_t cpu_get_icount_locked(void)
-{
- int64_t icount = cpu_get_icount_raw_locked();
- return atomic_read_i64(&timers_state.qemu_icount_bias) +
- cpu_icount_to_ns(icount);
-}
-
-int64_t cpu_get_icount_raw(void)
-{
- int64_t icount;
- unsigned start;
-
- do {
- start = seqlock_read_begin(&timers_state.vm_clock_seqlock);
- icount = cpu_get_icount_raw_locked();
- } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, start));
-
- return icount;
-}
-
-/* Return the virtual CPU time, based on the instruction counter. */
-int64_t cpu_get_icount(void)
-{
- int64_t icount;
- unsigned start;
-
- do {
- start = seqlock_read_begin(&timers_state.vm_clock_seqlock);
- icount = cpu_get_icount_locked();
- } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, start));
-
- return icount;
-}
-
-int64_t cpu_icount_to_ns(int64_t icount)
-{
- return icount << atomic_read(&timers_state.icount_time_shift);
-}
-
-static int64_t cpu_get_ticks_locked(void)
-{
- int64_t ticks = timers_state.cpu_ticks_offset;
- if (timers_state.cpu_ticks_enabled) {
- ticks += cpu_get_host_ticks();
- }
-
- if (timers_state.cpu_ticks_prev > ticks) {
- /* Non increasing ticks may happen if the host uses software suspend.
*/
- timers_state.cpu_ticks_offset += timers_state.cpu_ticks_prev - ticks;
- ticks = timers_state.cpu_ticks_prev;
- }
-
- timers_state.cpu_ticks_prev = ticks;
- return ticks;
-}
-
-/* return the time elapsed in VM between vm_start and vm_stop. Unless
- * icount is active, cpu_get_ticks() uses units of the host CPU cycle
- * counter.
- */
-int64_t cpu_get_ticks(void)
-{
- int64_t ticks;
-
- if (use_icount) {
- return cpu_get_icount();
- }
-
- qemu_spin_lock(&timers_state.vm_clock_lock);
- ticks = cpu_get_ticks_locked();
- qemu_spin_unlock(&timers_state.vm_clock_lock);
- return ticks;
-}
-
-static int64_t cpu_get_clock_locked(void)
-{
- int64_t time;
-
- time = timers_state.cpu_clock_offset;
- if (timers_state.cpu_ticks_enabled) {
- time += get_clock();
- }
-
- return time;
-}
-
-/* Return the monotonic time elapsed in VM, i.e.,
- * the time between vm_start and vm_stop
- */
-int64_t cpu_get_clock(void)
-{
- int64_t ti;
- unsigned start;
-
- do {
- start = seqlock_read_begin(&timers_state.vm_clock_seqlock);
- ti = cpu_get_clock_locked();
- } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, start));
-
- return ti;
-}
-
-/* enable cpu_get_ticks()
- * Caller must hold BQL which serves as mutex for vm_clock_seqlock.
- */
-void cpu_enable_ticks(void)
-{
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- if (!timers_state.cpu_ticks_enabled) {
- timers_state.cpu_ticks_offset -= cpu_get_host_ticks();
- timers_state.cpu_clock_offset -= get_clock();
- timers_state.cpu_ticks_enabled = 1;
- }
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
-}
-
-/* disable cpu_get_ticks() : the clock is stopped. You must not call
- * cpu_get_ticks() after that.
- * Caller must hold BQL which serves as mutex for vm_clock_seqlock.
- */
-void cpu_disable_ticks(void)
-{
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- if (timers_state.cpu_ticks_enabled) {
- timers_state.cpu_ticks_offset += cpu_get_host_ticks();
- timers_state.cpu_clock_offset = cpu_get_clock_locked();
- timers_state.cpu_ticks_enabled = 0;
- }
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
-}
-
-/* Correlation between real and virtual time is always going to be
- fairly approximate, so ignore small variation.
- When the guest is idle real and virtual time will be aligned in
- the IO wait loop. */
-#define ICOUNT_WOBBLE (NANOSECONDS_PER_SECOND / 10)
-
-static void icount_adjust(void)
-{
- int64_t cur_time;
- int64_t cur_icount;
- int64_t delta;
-
- /* Protected by TimersState mutex. */
- static int64_t last_delta;
-
- /* If the VM is not running, then do nothing. */
- if (!runstate_is_running()) {
- return;
- }
-
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- cur_time = REPLAY_CLOCK_LOCKED(REPLAY_CLOCK_VIRTUAL_RT,
- cpu_get_clock_locked());
- cur_icount = cpu_get_icount_locked();
-
- delta = cur_icount - cur_time;
- /* FIXME: This is a very crude algorithm, somewhat prone to oscillation.
*/
- if (delta > 0
- && last_delta + ICOUNT_WOBBLE < delta * 2
- && timers_state.icount_time_shift > 0) {
- /* The guest is getting too far ahead. Slow time down. */
- atomic_set(&timers_state.icount_time_shift,
- timers_state.icount_time_shift - 1);
- }
- if (delta < 0
- && last_delta - ICOUNT_WOBBLE > delta * 2
- && timers_state.icount_time_shift < MAX_ICOUNT_SHIFT) {
- /* The guest is getting too far behind. Speed time up. */
- atomic_set(&timers_state.icount_time_shift,
- timers_state.icount_time_shift + 1);
- }
- last_delta = delta;
- atomic_set_i64(&timers_state.qemu_icount_bias,
- cur_icount - (timers_state.qemu_icount
- << timers_state.icount_time_shift));
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
-}
-
-static void icount_adjust_rt(void *opaque)
-{
- timer_mod(timers_state.icount_rt_timer,
- qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL_RT) + 1000);
- icount_adjust();
-}
-
-static void icount_adjust_vm(void *opaque)
-{
- timer_mod(timers_state.icount_vm_timer,
- qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
- NANOSECONDS_PER_SECOND / 10);
- icount_adjust();
-}
-
-static int64_t qemu_icount_round(int64_t count)
-{
- int shift = atomic_read(&timers_state.icount_time_shift);
- return (count + (1 << shift) - 1) >> shift;
-}
-
-static void icount_warp_rt(void)
-{
- unsigned seq;
- int64_t warp_start;
-
- /* The icount_warp_timer is rescheduled soon after vm_clock_warp_start
- * changes from -1 to another value, so the race here is okay.
- */
- do {
- seq = seqlock_read_begin(&timers_state.vm_clock_seqlock);
- warp_start = timers_state.vm_clock_warp_start;
- } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, seq));
-
- if (warp_start == -1) {
- return;
- }
-
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- if (runstate_is_running()) {
- int64_t clock = REPLAY_CLOCK_LOCKED(REPLAY_CLOCK_VIRTUAL_RT,
- cpu_get_clock_locked());
- int64_t warp_delta;
-
- warp_delta = clock - timers_state.vm_clock_warp_start;
- if (use_icount == 2) {
- /*
- * In adaptive mode, do not let QEMU_CLOCK_VIRTUAL run too
- * far ahead of real time.
- */
- int64_t cur_icount = cpu_get_icount_locked();
- int64_t delta = clock - cur_icount;
- warp_delta = MIN(warp_delta, delta);
- }
- atomic_set_i64(&timers_state.qemu_icount_bias,
- timers_state.qemu_icount_bias + warp_delta);
- }
- timers_state.vm_clock_warp_start = -1;
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
-
- if (qemu_clock_expired(QEMU_CLOCK_VIRTUAL)) {
- qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
- }
-}
-
-static void icount_timer_cb(void *opaque)
-{
- /* No need for a checkpoint because the timer already synchronizes
- * with CHECKPOINT_CLOCK_VIRTUAL_RT.
- */
- icount_warp_rt();
-}
-
-void qtest_clock_warp(int64_t dest)
-{
- int64_t clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
- AioContext *aio_context;
- assert(qtest_enabled());
- aio_context = qemu_get_aio_context();
- while (clock < dest) {
- int64_t deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL,
- QEMU_TIMER_ATTR_ALL);
- int64_t warp = qemu_soonest_timeout(dest - clock, deadline);
-
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- atomic_set_i64(&timers_state.qemu_icount_bias,
- timers_state.qemu_icount_bias + warp);
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
-
- qemu_clock_run_timers(QEMU_CLOCK_VIRTUAL);
- timerlist_run_timers(aio_context->tlg.tl[QEMU_CLOCK_VIRTUAL]);
- clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
- }
- qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
-}
-
-void qemu_start_warp_timer(void)
-{
- int64_t clock;
- int64_t deadline;
-
- if (!use_icount) {
- return;
- }
-
- /* Nothing to do if the VM is stopped: QEMU_CLOCK_VIRTUAL timers
- * do not fire, so computing the deadline does not make sense.
- */
- if (!runstate_is_running()) {
- return;
- }
-
- if (replay_mode != REPLAY_MODE_PLAY) {
- if (!all_cpu_threads_idle()) {
- return;
- }
-
- if (qtest_enabled()) {
- /* When testing, qtest commands advance icount. */
- return;
- }
-
- replay_checkpoint(CHECKPOINT_CLOCK_WARP_START);
- } else {
- /* warp clock deterministically in record/replay mode */
- if (!replay_checkpoint(CHECKPOINT_CLOCK_WARP_START)) {
- /* vCPU is sleeping and warp can't be started.
- It is probably a race condition: notification sent
- to vCPU was processed in advance and vCPU went to sleep.
- Therefore we have to wake it up for doing someting. */
- if (replay_has_checkpoint()) {
- qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
- }
- return;
- }
- }
-
- /* We want to use the earliest deadline from ALL vm_clocks */
- clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT);
- deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL,
- ~QEMU_TIMER_ATTR_EXTERNAL);
- if (deadline < 0) {
- static bool notified;
- if (!icount_sleep && !notified) {
- warn_report("icount sleep disabled and no active timers");
- notified = true;
- }
- return;
- }
-
- if (deadline > 0) {
- /*
- * Ensure QEMU_CLOCK_VIRTUAL proceeds even when the virtual CPU goes to
- * sleep. Otherwise, the CPU might be waiting for a future timer
- * interrupt to wake it up, but the interrupt never comes because
- * the vCPU isn't running any insns and thus doesn't advance the
- * QEMU_CLOCK_VIRTUAL.
- */
- if (!icount_sleep) {
- /*
- * We never let VCPUs sleep in no sleep icount mode.
- * If there is a pending QEMU_CLOCK_VIRTUAL timer we just advance
- * to the next QEMU_CLOCK_VIRTUAL event and notify it.
- * It is useful when we want a deterministic execution time,
- * isolated from host latencies.
- */
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- atomic_set_i64(&timers_state.qemu_icount_bias,
- timers_state.qemu_icount_bias + deadline);
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
- } else {
- /*
- * We do stop VCPUs and only advance QEMU_CLOCK_VIRTUAL after some
- * "real" time, (related to the time left until the next event) has
- * passed. The QEMU_CLOCK_VIRTUAL_RT clock will do this.
- * This avoids that the warps are visible externally; for example,
- * you will not be sending network packets continuously instead of
- * every 100ms.
- */
- seqlock_write_lock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- if (timers_state.vm_clock_warp_start == -1
- || timers_state.vm_clock_warp_start > clock) {
- timers_state.vm_clock_warp_start = clock;
- }
- seqlock_write_unlock(&timers_state.vm_clock_seqlock,
- &timers_state.vm_clock_lock);
- timer_mod_anticipate(timers_state.icount_warp_timer,
- clock + deadline);
- }
- } else if (deadline == 0) {
- qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
- }
-}
-
-static void qemu_account_warp_timer(void)
-{
- if (!use_icount || !icount_sleep) {
- return;
- }
-
- /* Nothing to do if the VM is stopped: QEMU_CLOCK_VIRTUAL timers
- * do not fire, so computing the deadline does not make sense.
- */
- if (!runstate_is_running()) {
- return;
- }
-
- /* warp clock deterministically in record/replay mode */
- if (!replay_checkpoint(CHECKPOINT_CLOCK_WARP_ACCOUNT)) {
- return;
- }
-
- timer_del(timers_state.icount_warp_timer);
- icount_warp_rt();
-}
-
-static bool icount_state_needed(void *opaque)
-{
- return use_icount;
-}
-
-static bool warp_timer_state_needed(void *opaque)
-{
- TimersState *s = opaque;
- return s->icount_warp_timer != NULL;
-}
-
-static bool adjust_timers_state_needed(void *opaque)
-{
- TimersState *s = opaque;
- return s->icount_rt_timer != NULL;
-}
-
-static bool shift_state_needed(void *opaque)
-{
- return use_icount == 2;
-}
-
-/*
- * Subsection for warp timer migration is optional, because may not be created
- */
-static const VMStateDescription icount_vmstate_warp_timer = {
- .name = "timer/icount/warp_timer",
- .version_id = 1,
- .minimum_version_id = 1,
- .needed = warp_timer_state_needed,
- .fields = (VMStateField[]) {
- VMSTATE_INT64(vm_clock_warp_start, TimersState),
- VMSTATE_TIMER_PTR(icount_warp_timer, TimersState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static const VMStateDescription icount_vmstate_adjust_timers = {
- .name = "timer/icount/timers",
- .version_id = 1,
- .minimum_version_id = 1,
- .needed = adjust_timers_state_needed,
- .fields = (VMStateField[]) {
- VMSTATE_TIMER_PTR(icount_rt_timer, TimersState),
- VMSTATE_TIMER_PTR(icount_vm_timer, TimersState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-static const VMStateDescription icount_vmstate_shift = {
- .name = "timer/icount/shift",
- .version_id = 1,
- .minimum_version_id = 1,
- .needed = shift_state_needed,
- .fields = (VMStateField[]) {
- VMSTATE_INT16(icount_time_shift, TimersState),
- VMSTATE_END_OF_LIST()
- }
-};
-
-/*
- * This is a subsection for icount migration.
- */
-static const VMStateDescription icount_vmstate_timers = {
- .name = "timer/icount",
- .version_id = 1,
- .minimum_version_id = 1,
- .needed = icount_state_needed,
- .fields = (VMStateField[]) {
- VMSTATE_INT64(qemu_icount_bias, TimersState),
- VMSTATE_INT64(qemu_icount, TimersState),
- VMSTATE_END_OF_LIST()
- },
- .subsections = (const VMStateDescription*[]) {
- &icount_vmstate_warp_timer,
- &icount_vmstate_adjust_timers,
- &icount_vmstate_shift,
- NULL
- }
-};
-
-static const VMStateDescription vmstate_timers = {
- .name = "timer",
- .version_id = 2,
- .minimum_version_id = 1,
- .fields = (VMStateField[]) {
- VMSTATE_INT64(cpu_ticks_offset, TimersState),
- VMSTATE_UNUSED(8),
- VMSTATE_INT64_V(cpu_clock_offset, TimersState, 2),
- VMSTATE_END_OF_LIST()
- },
- .subsections = (const VMStateDescription*[]) {
- &icount_vmstate_timers,
- NULL
- }
-};
-
-void cpu_ticks_init(void)
-{
- seqlock_init(&timers_state.vm_clock_seqlock);
- qemu_spin_init(&timers_state.vm_clock_lock);
- vmstate_register(NULL, 0, &vmstate_timers, &timers_state);
- cpu_throttle_init();
-}
-
-void configure_icount(QemuOpts *opts, Error **errp)
-{
- const char *option = qemu_opt_get(opts, "shift");
- bool sleep = qemu_opt_get_bool(opts, "sleep", true);
- bool align = qemu_opt_get_bool(opts, "align", false);
- long time_shift = -1;
-
- if (!option) {
- if (qemu_opt_get(opts, "align") != NULL) {
- error_setg(errp, "Please specify shift option when using align");
- }
- return;
- }
-
- if (align && !sleep) {
- error_setg(errp, "align=on and sleep=off are incompatible");
- return;
- }
-
- if (strcmp(option, "auto") != 0) {
- if (qemu_strtol(option, NULL, 0, &time_shift) < 0
- || time_shift < 0 || time_shift > MAX_ICOUNT_SHIFT) {
- error_setg(errp, "icount: Invalid shift value");
- return;
- }
- } else if (icount_align_option) {
- error_setg(errp, "shift=auto and align=on are incompatible");
- return;
- } else if (!icount_sleep) {
- error_setg(errp, "shift=auto and sleep=off are incompatible");
- return;
- }
-
- icount_sleep = sleep;
- if (icount_sleep) {
- timers_state.icount_warp_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL_RT,
- icount_timer_cb, NULL);
- }
-
- icount_align_option = align;
-
- if (time_shift >= 0) {
- timers_state.icount_time_shift = time_shift;
- use_icount = 1;
- return;
- }
-
- use_icount = 2;
-
- /* 125MIPS seems a reasonable initial guess at the guest speed.
- It will be corrected fairly quickly anyway. */
- timers_state.icount_time_shift = 3;
-
- /* Have both realtime and virtual time triggers for speed adjustment.
- The realtime trigger catches emulated time passing too slowly,
- the virtual time trigger catches emulated time passing too fast.
- Realtime triggers occur even when idle, so use them less frequently
- than VM triggers. */
- timers_state.vm_clock_warp_start = -1;
- timers_state.icount_rt_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL_RT,
- icount_adjust_rt, NULL);
- timer_mod(timers_state.icount_rt_timer,
- qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL_RT) + 1000);
- timers_state.icount_vm_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
- icount_adjust_vm, NULL);
- timer_mod(timers_state.icount_vm_timer,
- qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
- NANOSECONDS_PER_SECOND / 10);
-}
-
/***********************************************************/
/* TCG vCPU kick timer
*
@@ -854,35 +171,6 @@ static void qemu_cpu_kick_rr_cpus(void)
};
}
-static void do_nothing(CPUState *cpu, run_on_cpu_data unused)
-{
-}
-
-void qemu_timer_notify_cb(void *opaque, QEMUClockType type)
-{
- if (!use_icount || type != QEMU_CLOCK_VIRTUAL) {
- qemu_notify_event();
- return;
- }
-
- if (qemu_in_vcpu_thread()) {
- /* A CPU is currently running; kick it back out to the
- * tcg_cpu_exec() loop so it will recalculate its
- * icount deadline immediately.
- */
- qemu_cpu_kick(current_cpu);
- } else if (first_cpu) {
- /* qemu_cpu_kick is not enough to kick a halted CPU out of
- * qemu_tcg_wait_io_event. async_run_on_cpu, instead,
- * causes cpu_thread_is_idle to return false. This way,
- * handle_icount_deadline can run.
- * If we have no CPUs at all for some reason, we don't
- * need to do anything.
- */
- async_run_on_cpu(first_cpu, do_nothing, RUN_ON_CPU_NULL);
- }
-}
-
static void kick_tcg_thread(void *opaque)
{
timer_mod(tcg_kick_vcpu_timer, qemu_tcg_next_kick());
@@ -1288,7 +576,7 @@ static void notify_aio_contexts(void)
static void handle_icount_deadline(void)
{
assert(qemu_in_vcpu_thread());
- if (use_icount) {
+ if (icount_enabled()) {
int64_t deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL,
QEMU_TIMER_ATTR_ALL);
@@ -1300,7 +588,7 @@ static void handle_icount_deadline(void)
static void prepare_icount_for_run(CPUState *cpu)
{
- if (use_icount) {
+ if (icount_enabled()) {
int insns_left;
/* These should always be cleared by process_icount_data after
@@ -1325,7 +613,7 @@ static void prepare_icount_for_run(CPUState *cpu)
static void process_icount_data(CPUState *cpu)
{
- if (use_icount) {
+ if (icount_enabled()) {
/* Account for executed instructions */
cpu_update_icount(cpu);
@@ -1486,7 +774,7 @@ static void *qemu_tcg_rr_cpu_thread_fn(void *arg)
atomic_mb_set(&cpu->exit_request, 0);
}
- if (use_icount && all_cpu_threads_idle()) {
+ if (icount_enabled() && all_cpu_threads_idle()) {
/*
* When all cpus are sleeping (e.g in WFI), to avoid a deadlock
* in the main_loop, wake it up in order to start the warp timer.
@@ -1639,7 +927,7 @@ static void *qemu_tcg_cpu_thread_fn(void *arg)
CPUState *cpu = arg;
assert(tcg_enabled());
- g_assert(!use_icount);
+ g_assert(!icount_enabled());
rcu_register_thread();
tcg_register_thread();
@@ -2227,21 +1515,3 @@ void qmp_inject_nmi(Error **errp)
nmi_monitor_handle(monitor_get_cpu_index(), errp);
}
-void dump_drift_info(void)
-{
- if (!use_icount) {
- return;
- }
-
- qemu_printf("Host - Guest clock %"PRIi64" ms\n",
- (cpu_get_clock() - cpu_get_icount())/SCALE_MS);
- if (icount_align_option) {
- qemu_printf("Max guest delay %"PRIi64" ms\n",
- -max_delay / SCALE_MS);
- qemu_printf("Max guest advance %"PRIi64" ms\n",
- max_advance / SCALE_MS);
- } else {
- qemu_printf("Max guest delay NA\n");
- qemu_printf("Max guest advance NA\n");
- }
-}
diff --git a/softmmu/icount.c b/softmmu/icount.c
new file mode 100644
index 0000000000..4e26bf445d
--- /dev/null
+++ b/softmmu/icount.c
@@ -0,0 +1,492 @@
+/*
+ * QEMU System Emulator
+ *
+ * Copyright (c) 2003-2008 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu-common.h"
+#include "qemu/cutils.h"
+#include "migration/vmstate.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "exec/exec-all.h"
+#include "sysemu/cpus.h"
+#include "sysemu/qtest.h"
+#include "qemu/main-loop.h"
+#include "qemu/option.h"
+#include "qemu/seqlock.h"
+#include "sysemu/replay.h"
+#include "sysemu/runstate.h"
+#include "hw/core/cpu.h"
+#include "sysemu/cpu-timers.h"
+#include "sysemu/cpu-throttle.h"
+#include "timers-state.h"
+
+/*
+ * ICOUNT: Instruction Counter
+ *
+ * this module is split off from cpu-timers because the icount part
+ * is TCG-specific, and does not need to be built for other accels.
+ */
+static bool icount_sleep = true;
+/* Arbitrarily pick 1MIPS as the minimum allowable speed. */
+#define MAX_ICOUNT_SHIFT 10
+
+/*
+ * 0 = Do not count executed instructions.
+ * 1 = Fixed conversion of insn to ns via "shift" option
+ * 2 = Runtime adaptive algorithm to compute shift
+ */
+int use_icount;
+
+static void icount_enable_precise(void)
+{
+ use_icount = 1;
+}
+
+static void icount_enable_adaptive(void)
+{
+ use_icount = 2;
+}
+
+/*
+ * The current number of executed instructions is based on what we
+ * originally budgeted minus the current state of the decrementing
+ * icount counters in extra/u16.low.
+ */
+static int64_t cpu_get_icount_executed(CPUState *cpu)
+{
+ return (cpu->icount_budget -
+ (cpu_neg(cpu)->icount_decr.u16.low + cpu->icount_extra));
+}
+
+/*
+ * Update the global shared timer_state.qemu_icount to take into
+ * account executed instructions. This is done by the TCG vCPU
+ * thread so the main-loop can see time has moved forward.
+ */
+static void cpu_update_icount_locked(CPUState *cpu)
+{
+ int64_t executed = cpu_get_icount_executed(cpu);
+ cpu->icount_budget -= executed;
+
+ atomic_set_i64(&timers_state.qemu_icount,
+ timers_state.qemu_icount + executed);
+}
+
+/*
+ * Update the global shared timer_state.qemu_icount to take into
+ * account executed instructions. This is done by the TCG vCPU
+ * thread so the main-loop can see time has moved forward.
+ */
+void cpu_update_icount(CPUState *cpu)
+{
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ cpu_update_icount_locked(cpu);
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+}
+
+static int64_t cpu_get_icount_raw_locked(void)
+{
+ CPUState *cpu = current_cpu;
+
+ if (cpu && cpu->running) {
+ if (!cpu->can_do_io) {
+ error_report("Bad icount read");
+ exit(1);
+ }
+ /* Take into account what has run */
+ cpu_update_icount_locked(cpu);
+ }
+ /* The read is protected by the seqlock, but needs atomic64 to avoid UB */
+ return atomic_read_i64(&timers_state.qemu_icount);
+}
+
+static int64_t cpu_get_icount_locked(void)
+{
+ int64_t icount = cpu_get_icount_raw_locked();
+ return atomic_read_i64(&timers_state.qemu_icount_bias) +
+ cpu_icount_to_ns(icount);
+}
+
+int64_t cpu_get_icount_raw(void)
+{
+ int64_t icount;
+ unsigned start;
+
+ do {
+ start = seqlock_read_begin(&timers_state.vm_clock_seqlock);
+ icount = cpu_get_icount_raw_locked();
+ } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, start));
+
+ return icount;
+}
+
+/* Return the virtual CPU time, based on the instruction counter. */
+int64_t cpu_get_icount(void)
+{
+ int64_t icount;
+ unsigned start;
+
+ do {
+ start = seqlock_read_begin(&timers_state.vm_clock_seqlock);
+ icount = cpu_get_icount_locked();
+ } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, start));
+
+ return icount;
+}
+
+int64_t cpu_icount_to_ns(int64_t icount)
+{
+ return icount << atomic_read(&timers_state.icount_time_shift);
+}
+
+/*
+ * Correlation between real and virtual time is always going to be
+ * fairly approximate, so ignore small variation.
+ * When the guest is idle real and virtual time will be aligned in
+ * the IO wait loop.
+ */
+#define ICOUNT_WOBBLE (NANOSECONDS_PER_SECOND / 10)
+
+static void icount_adjust(void)
+{
+ int64_t cur_time;
+ int64_t cur_icount;
+ int64_t delta;
+
+ /* Protected by TimersState mutex. */
+ static int64_t last_delta;
+
+ /* If the VM is not running, then do nothing. */
+ if (!runstate_is_running()) {
+ return;
+ }
+
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ cur_time = REPLAY_CLOCK_LOCKED(REPLAY_CLOCK_VIRTUAL_RT,
+ cpu_get_clock_locked());
+ cur_icount = cpu_get_icount_locked();
+
+ delta = cur_icount - cur_time;
+ /* FIXME: This is a very crude algorithm, somewhat prone to oscillation.
*/
+ if (delta > 0
+ && last_delta + ICOUNT_WOBBLE < delta * 2
+ && timers_state.icount_time_shift > 0) {
+ /* The guest is getting too far ahead. Slow time down. */
+ atomic_set(&timers_state.icount_time_shift,
+ timers_state.icount_time_shift - 1);
+ }
+ if (delta < 0
+ && last_delta - ICOUNT_WOBBLE > delta * 2
+ && timers_state.icount_time_shift < MAX_ICOUNT_SHIFT) {
+ /* The guest is getting too far behind. Speed time up. */
+ atomic_set(&timers_state.icount_time_shift,
+ timers_state.icount_time_shift + 1);
+ }
+ last_delta = delta;
+ atomic_set_i64(&timers_state.qemu_icount_bias,
+ cur_icount - (timers_state.qemu_icount
+ << timers_state.icount_time_shift));
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+}
+
+static void icount_adjust_rt(void *opaque)
+{
+ timer_mod(timers_state.icount_rt_timer,
+ qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL_RT) + 1000);
+ icount_adjust();
+}
+
+static void icount_adjust_vm(void *opaque)
+{
+ timer_mod(timers_state.icount_vm_timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+ NANOSECONDS_PER_SECOND / 10);
+ icount_adjust();
+}
+
+int64_t qemu_icount_round(int64_t count)
+{
+ int shift = atomic_read(&timers_state.icount_time_shift);
+ return (count + (1 << shift) - 1) >> shift;
+}
+
+static void icount_warp_rt(void)
+{
+ unsigned seq;
+ int64_t warp_start;
+
+ /*
+ * The icount_warp_timer is rescheduled soon after vm_clock_warp_start
+ * changes from -1 to another value, so the race here is okay.
+ */
+ do {
+ seq = seqlock_read_begin(&timers_state.vm_clock_seqlock);
+ warp_start = timers_state.vm_clock_warp_start;
+ } while (seqlock_read_retry(&timers_state.vm_clock_seqlock, seq));
+
+ if (warp_start == -1) {
+ return;
+ }
+
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ if (runstate_is_running()) {
+ int64_t clock = REPLAY_CLOCK_LOCKED(REPLAY_CLOCK_VIRTUAL_RT,
+ cpu_get_clock_locked());
+ int64_t warp_delta;
+
+ warp_delta = clock - timers_state.vm_clock_warp_start;
+ if (icount_enabled() == 2) {
+ /*
+ * In adaptive mode, do not let QEMU_CLOCK_VIRTUAL run too
+ * far ahead of real time.
+ */
+ int64_t cur_icount = cpu_get_icount_locked();
+ int64_t delta = clock - cur_icount;
+ warp_delta = MIN(warp_delta, delta);
+ }
+ atomic_set_i64(&timers_state.qemu_icount_bias,
+ timers_state.qemu_icount_bias + warp_delta);
+ }
+ timers_state.vm_clock_warp_start = -1;
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+
+ if (qemu_clock_expired(QEMU_CLOCK_VIRTUAL)) {
+ qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
+ }
+}
+
+static void icount_timer_cb(void *opaque)
+{
+ /*
+ * No need for a checkpoint because the timer already synchronizes
+ * with CHECKPOINT_CLOCK_VIRTUAL_RT.
+ */
+ icount_warp_rt();
+}
+
+void qemu_start_warp_timer(void)
+{
+ int64_t clock;
+ int64_t deadline;
+
+ assert(icount_enabled());
+
+ /*
+ * Nothing to do if the VM is stopped: QEMU_CLOCK_VIRTUAL timers
+ * do not fire, so computing the deadline does not make sense.
+ */
+ if (!runstate_is_running()) {
+ return;
+ }
+
+ if (replay_mode != REPLAY_MODE_PLAY) {
+ if (!all_cpu_threads_idle()) {
+ return;
+ }
+
+ if (qtest_enabled()) {
+ /* When testing, qtest commands advance icount. */
+ return;
+ }
+
+ replay_checkpoint(CHECKPOINT_CLOCK_WARP_START);
+ } else {
+ /* warp clock deterministically in record/replay mode */
+ if (!replay_checkpoint(CHECKPOINT_CLOCK_WARP_START)) {
+ /*
+ * vCPU is sleeping and warp can't be started.
+ * It is probably a race condition: notification sent
+ * to vCPU was processed in advance and vCPU went to sleep.
+ * Therefore we have to wake it up for doing someting.
+ */
+ if (replay_has_checkpoint()) {
+ qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
+ }
+ return;
+ }
+ }
+
+ /* We want to use the earliest deadline from ALL vm_clocks */
+ clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL_RT);
+ deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL,
+ ~QEMU_TIMER_ATTR_EXTERNAL);
+ if (deadline < 0) {
+ static bool notified;
+ if (!icount_sleep && !notified) {
+ warn_report("icount sleep disabled and no active timers");
+ notified = true;
+ }
+ return;
+ }
+
+ if (deadline > 0) {
+ /*
+ * Ensure QEMU_CLOCK_VIRTUAL proceeds even when the virtual CPU goes to
+ * sleep. Otherwise, the CPU might be waiting for a future timer
+ * interrupt to wake it up, but the interrupt never comes because
+ * the vCPU isn't running any insns and thus doesn't advance the
+ * QEMU_CLOCK_VIRTUAL.
+ */
+ if (!icount_sleep) {
+ /*
+ * We never let VCPUs sleep in no sleep icount mode.
+ * If there is a pending QEMU_CLOCK_VIRTUAL timer we just advance
+ * to the next QEMU_CLOCK_VIRTUAL event and notify it.
+ * It is useful when we want a deterministic execution time,
+ * isolated from host latencies.
+ */
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ atomic_set_i64(&timers_state.qemu_icount_bias,
+ timers_state.qemu_icount_bias + deadline);
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
+ } else {
+ /*
+ * We do stop VCPUs and only advance QEMU_CLOCK_VIRTUAL after some
+ * "real" time, (related to the time left until the next event) has
+ * passed. The QEMU_CLOCK_VIRTUAL_RT clock will do this.
+ * This avoids that the warps are visible externally; for example,
+ * you will not be sending network packets continuously instead of
+ * every 100ms.
+ */
+ seqlock_write_lock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ if (timers_state.vm_clock_warp_start == -1
+ || timers_state.vm_clock_warp_start > clock) {
+ timers_state.vm_clock_warp_start = clock;
+ }
+ seqlock_write_unlock(&timers_state.vm_clock_seqlock,
+ &timers_state.vm_clock_lock);
+ timer_mod_anticipate(timers_state.icount_warp_timer,
+ clock + deadline);
+ }
+ } else if (deadline == 0) {
+ qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
+ }
+}
+
+void qemu_account_warp_timer(void)
+{
+ if (!icount_enabled() || !icount_sleep) {
+ return;
+ }
+
+ /*
+ * Nothing to do if the VM is stopped: QEMU_CLOCK_VIRTUAL timers
+ * do not fire, so computing the deadline does not make sense.
+ */
+ if (!runstate_is_running()) {
+ return;
+ }
+
+ /* warp clock deterministically in record/replay mode */
+ if (!replay_checkpoint(CHECKPOINT_CLOCK_WARP_ACCOUNT)) {
+ return;
+ }
+
+ timer_del(timers_state.icount_warp_timer);
+ icount_warp_rt();
+}
+
+void configure_icount(QemuOpts *opts, Error **errp)
+{
+ const char *option = qemu_opt_get(opts, "shift");
+ bool sleep = qemu_opt_get_bool(opts, "sleep", true);
+ bool align = qemu_opt_get_bool(opts, "align", false);
+ long time_shift = -1;
+
+ if (!option) {
+ if (qemu_opt_get(opts, "align") != NULL) {
+ error_setg(errp, "Please specify shift option when using align");
+ }
+ return;
+ }
+
+ if (align && !sleep) {
+ error_setg(errp, "align=on and sleep=off are incompatible");
+ return;
+ }
+
+ if (strcmp(option, "auto") != 0) {
+ if (qemu_strtol(option, NULL, 0, &time_shift) < 0
+ || time_shift < 0 || time_shift > MAX_ICOUNT_SHIFT) {
+ error_setg(errp, "icount: Invalid shift value");
+ return;
+ }
+ } else if (icount_align_option) {
+ error_setg(errp, "shift=auto and align=on are incompatible");
+ return;
+ } else if (!icount_sleep) {
+ error_setg(errp, "shift=auto and sleep=off are incompatible");
+ return;
+ }
+
+ icount_sleep = sleep;
+ if (icount_sleep) {
+ timers_state.icount_warp_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL_RT,
+ icount_timer_cb, NULL);
+ }
+
+ icount_align_option = align;
+
+ if (time_shift >= 0) {
+ timers_state.icount_time_shift = time_shift;
+ icount_enable_precise();
+ return;
+ }
+
+ icount_enable_adaptive();
+
+ /*
+ * 125MIPS seems a reasonable initial guess at the guest speed.
+ * It will be corrected fairly quickly anyway.
+ */
+ timers_state.icount_time_shift = 3;
+
+ /*
+ * Have both realtime and virtual time triggers for speed adjustment.
+ * The realtime trigger catches emulated time passing too slowly,
+ * the virtual time trigger catches emulated time passing too fast.
+ * Realtime triggers occur even when idle, so use them less frequently
+ * than VM triggers.
+ */
+ timers_state.vm_clock_warp_start = -1;
+ timers_state.icount_rt_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL_RT,
+ icount_adjust_rt, NULL);
+ timer_mod(timers_state.icount_rt_timer,
+ qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL_RT) + 1000);
+ timers_state.icount_vm_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
+ icount_adjust_vm, NULL);
+ timer_mod(timers_state.icount_vm_timer,
+ qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+ NANOSECONDS_PER_SECOND / 10);
+}
diff --git a/softmmu/meson.build b/softmmu/meson.build
index 95d38df259..36c96e7b15 100644
--- a/softmmu/meson.build
+++ b/softmmu/meson.build
@@ -1,4 +1,4 @@
-specific_ss.add(when: 'CONFIG_SOFTMMU', if_true: files(
+specific_ss.add(when: 'CONFIG_SOFTMMU', if_true: [files(
'arch_init.c',
'balloon.c',
'cpus.c',
@@ -7,4 +7,10 @@ specific_ss.add(when: 'CONFIG_SOFTMMU', if_true: files(
'memory.c',
'memory_mapping.c',
'qtest.c',
- 'vl.c'))
+ 'vl.c',
+ 'cpu-timers.c',
+)])
+
+specific_ss.add(when: ['CONFIG_SOFTMMU', 'CONFIG_TCG'], if_true: [files(
+ 'icount.c'
+)])
diff --git a/softmmu/qtest.c b/softmmu/qtest.c
index 4e439caec7..8f70658481 100644
--- a/softmmu/qtest.c
+++ b/softmmu/qtest.c
@@ -21,7 +21,7 @@
#include "exec/memory.h"
#include "hw/irq.h"
#include "sysemu/accel.h"
-#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "qemu/config-file.h"
#include "qemu/option.h"
#include "qemu/error-report.h"
@@ -273,6 +273,38 @@ static void qtest_irq_handler(void *opaque, int n, int
level)
}
}
+static int64_t qtest_clock_counter;
+
+int64_t qtest_get_virtual_clock(void)
+{
+ return atomic_read_i64(&qtest_clock_counter);
+}
+
+static void qtest_set_virtual_clock(int64_t count)
+{
+ atomic_set_i64(&qtest_clock_counter, count);
+}
+
+static void qtest_clock_warp(int64_t dest)
+{
+ int64_t clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ AioContext *aio_context;
+ assert(qtest_enabled());
+ aio_context = qemu_get_aio_context();
+ while (clock < dest) {
+ int64_t deadline = qemu_clock_deadline_ns_all(QEMU_CLOCK_VIRTUAL,
+ QEMU_TIMER_ATTR_ALL);
+ int64_t warp = qemu_soonest_timeout(dest - clock, deadline);
+
+ qtest_set_virtual_clock(qtest_get_virtual_clock() + warp);
+
+ qemu_clock_run_timers(QEMU_CLOCK_VIRTUAL);
+ timerlist_run_timers(aio_context->tlg.tl[QEMU_CLOCK_VIRTUAL]);
+ clock = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ }
+ qemu_clock_notify(QEMU_CLOCK_VIRTUAL);
+}
+
static void qtest_process_command(CharBackend *chr, gchar **words)
{
const gchar *command;
diff --git a/softmmu/timers-state.h b/softmmu/timers-state.h
new file mode 100644
index 0000000000..db4e60f18f
--- /dev/null
+++ b/softmmu/timers-state.h
@@ -0,0 +1,69 @@
+/*
+ * QEMU System Emulator
+ *
+ * Copyright (c) 2003-2008 Fabrice Bellard
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef TIMERS_STATE_H
+#define TIMERS_STATE_H
+
+/* timers state, for sharing between icount and cpu-timers */
+
+typedef struct TimersState {
+ /* Protected by BQL. */
+ int64_t cpu_ticks_prev;
+ int64_t cpu_ticks_offset;
+
+ /*
+ * Protect fields that can be respectively read outside the
+ * BQL, and written from multiple threads.
+ */
+ QemuSeqLock vm_clock_seqlock;
+ QemuSpin vm_clock_lock;
+
+ int16_t cpu_ticks_enabled;
+
+ /* Conversion factor from emulated instructions to virtual clock ticks. */
+ int16_t icount_time_shift;
+
+ /* Compensate for varying guest execution speed. */
+ int64_t qemu_icount_bias;
+
+ int64_t vm_clock_warp_start;
+ int64_t cpu_clock_offset;
+
+ /* Only written by TCG thread */
+ int64_t qemu_icount;
+
+ /* for adjusting icount */
+ QEMUTimer *icount_rt_timer;
+ QEMUTimer *icount_vm_timer;
+ QEMUTimer *icount_warp_timer;
+} TimersState;
+
+extern TimersState timers_state;
+
+/*
+ * icount needs this internal from cpu-timers when adjusting the icount shift.
+ */
+int64_t cpu_get_clock_locked(void);
+
+#endif /* TIMERS_STATE_H */
diff --git a/softmmu/vl.c b/softmmu/vl.c
index f7b103467c..23a9c60bc3 100644
--- a/softmmu/vl.c
+++ b/softmmu/vl.c
@@ -74,6 +74,7 @@
#include "hw/audio/soundhw.h"
#include "audio/audio.h"
#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "migration/colo.h"
#include "migration/postcopy-ram.h"
#include "sysemu/kvm.h"
@@ -2802,7 +2803,7 @@ static void configure_accelerators(const char *progname)
error_report("falling back to %s", ac->name);
}
- if (use_icount && !(tcg_enabled() || qtest_enabled())) {
+ if (icount_enabled() && !tcg_enabled()) {
error_report("-icount is not allowed with hardware virtualization");
exit(1);
}
@@ -4237,7 +4238,8 @@ void qemu_init(int argc, char **argv, char **envp)
semihosting_arg_fallback(kernel_filename, kernel_cmdline);
}
- cpu_ticks_init();
+ /* initialize cpu timers and VCPU throttle modules */
+ cpu_timers_init();
if (default_net) {
QemuOptsList *net = qemu_find_opts("net");
diff --git a/stubs/clock-warp.c b/stubs/clock-warp.c
deleted file mode 100644
index b53e5dd94c..0000000000
--- a/stubs/clock-warp.c
+++ /dev/null
@@ -1,7 +0,0 @@
-#include "qemu/osdep.h"
-#include "qemu/timer.h"
-
-void qemu_start_warp_timer(void)
-{
-}
-
diff --git a/stubs/cpu-get-clock.c b/stubs/cpu-get-clock.c
index 5a92810e87..9e92404816 100644
--- a/stubs/cpu-get-clock.c
+++ b/stubs/cpu-get-clock.c
@@ -1,5 +1,6 @@
#include "qemu/osdep.h"
-#include "qemu/timer.h"
+#include "sysemu/cpu-timers.h"
+#include "qemu/main-loop.h"
int64_t cpu_get_clock(void)
{
diff --git a/stubs/cpu-get-icount.c b/stubs/cpu-get-icount.c
deleted file mode 100644
index 4001613240..0000000000
--- a/stubs/cpu-get-icount.c
+++ /dev/null
@@ -1,16 +0,0 @@
-#include "qemu/osdep.h"
-#include "qemu/timer.h"
-#include "sysemu/cpus.h"
-#include "qemu/main-loop.h"
-
-int use_icount;
-
-int64_t cpu_get_icount(void)
-{
- abort();
-}
-
-int64_t cpu_get_icount_raw(void)
-{
- abort();
-}
diff --git a/stubs/icount.c b/stubs/icount.c
new file mode 100644
index 0000000000..61e28cbaf9
--- /dev/null
+++ b/stubs/icount.c
@@ -0,0 +1,45 @@
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "sysemu/cpu-timers.h"
+
+/* icount - Instruction Counter API */
+
+int use_icount;
+
+void cpu_update_icount(CPUState *cpu)
+{
+ abort();
+}
+void configure_icount(QemuOpts *opts, Error **errp)
+{
+ /* signal error */
+ error_setg(errp, "cannot configure icount, TCG support not available");
+}
+int64_t cpu_get_icount_raw(void)
+{
+ abort();
+ return 0;
+}
+int64_t cpu_get_icount(void)
+{
+ abort();
+ return 0;
+}
+int64_t cpu_icount_to_ns(int64_t icount)
+{
+ abort();
+ return 0;
+}
+int64_t qemu_icount_round(int64_t count)
+{
+ abort();
+ return 0;
+}
+void qemu_start_warp_timer(void)
+{
+ abort();
+}
+void qemu_account_warp_timer(void)
+{
+ abort();
+}
diff --git a/stubs/meson.build b/stubs/meson.build
index e0b322bc28..e64ce02ea2 100644
--- a/stubs/meson.build
+++ b/stubs/meson.build
@@ -3,10 +3,10 @@ stub_ss.add(files('bdrv-next-monitor-owned.c'))
stub_ss.add(files('blk-commit-all.c'))
stub_ss.add(files('blockdev-close-all-bdrv-states.c'))
stub_ss.add(files('change-state-handler.c'))
-stub_ss.add(files('clock-warp.c'))
stub_ss.add(files('cmos.c'))
stub_ss.add(files('cpu-get-clock.c'))
-stub_ss.add(files('cpu-get-icount.c'))
+stub_ss.add(files('qemu-timer-notify-cb.c'))
+stub_ss.add(files('icount.c'))
stub_ss.add(files('dump.c'))
stub_ss.add(files('error-printf.c'))
stub_ss.add(files('fdset.c'))
diff --git a/stubs/qemu-timer-notify-cb.c b/stubs/qemu-timer-notify-cb.c
index 054b408b1c..845e46f8e0 100644
--- a/stubs/qemu-timer-notify-cb.c
+++ b/stubs/qemu-timer-notify-cb.c
@@ -1,5 +1,5 @@
#include "qemu/osdep.h"
-#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "qemu/main-loop.h"
void qemu_timer_notify_cb(void *opaque, QEMUClockType type)
diff --git a/stubs/qtest.c b/stubs/qtest.c
index 891eb954fb..4666a49d7d 100644
--- a/stubs/qtest.c
+++ b/stubs/qtest.c
@@ -18,3 +18,8 @@ bool qtest_driver(void)
{
return false;
}
+
+int64_t qtest_get_virtual_clock(void)
+{
+ return 0;
+}
diff --git a/target/alpha/translate.c b/target/alpha/translate.c
index 8870284f57..36be602179 100644
--- a/target/alpha/translate.c
+++ b/target/alpha/translate.c
@@ -20,6 +20,7 @@
#include "qemu/osdep.h"
#include "cpu.h"
#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "disas/disas.h"
#include "qemu/host-utils.h"
#include "exec/exec-all.h"
@@ -1329,7 +1330,7 @@ static DisasJumpType gen_mfpr(DisasContext *ctx, TCGv va,
int regno)
case 249: /* VMTIME */
helper = gen_helper_get_vmtime;
do_helper:
- if (use_icount) {
+ if (icount_enabled()) {
gen_io_start();
helper(va);
return DISAS_PC_STALE;
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 88bd9dd35d..dd5a28f1c7 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -24,6 +24,7 @@
#include "hw/irq.h"
#include "hw/semihosting/semihost.h"
#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/kvm.h"
#include "sysemu/tcg.h"
#include "qemu/range.h"
@@ -1206,7 +1207,7 @@ static int64_t cycles_ns_per(uint64_t cycles)
static bool instructions_supported(CPUARMState *env)
{
- return use_icount == 1 /* Precise instruction counting */;
+ return icount_enabled() == 1; /* Precise instruction counting */
}
static uint64_t instructions_get_count(CPUARMState *env)
diff --git a/target/riscv/csr.c b/target/riscv/csr.c
index 26ae347b4a..e51ed7b9ca 100644
--- a/target/riscv/csr.c
+++ b/target/riscv/csr.c
@@ -299,7 +299,7 @@ static int write_vstart(CPURISCVState *env, int csrno,
target_ulong val)
static int read_instret(CPURISCVState *env, int csrno, target_ulong *val)
{
#if !defined(CONFIG_USER_ONLY)
- if (use_icount) {
+ if (icount_enabled()) {
*val = cpu_get_icount();
} else {
*val = cpu_get_host_ticks();
@@ -314,7 +314,7 @@ static int read_instret(CPURISCVState *env, int csrno,
target_ulong *val)
static int read_instreth(CPURISCVState *env, int csrno, target_ulong *val)
{
#if !defined(CONFIG_USER_ONLY)
- if (use_icount) {
+ if (icount_enabled()) {
*val = cpu_get_icount() >> 32;
} else {
*val = cpu_get_host_ticks() >> 32;
diff --git a/tests/ptimer-test-stubs.c b/tests/ptimer-test-stubs.c
index ed393d9082..e935a1395e 100644
--- a/tests/ptimer-test-stubs.c
+++ b/tests/ptimer-test-stubs.c
@@ -12,6 +12,7 @@
#include "qemu/main-loop.h"
#include "sysemu/replay.h"
#include "migration/vmstate.h"
+#include "sysemu/cpu-timers.h"
#include "ptimer-test.h"
@@ -30,8 +31,8 @@ QEMUTimerListGroup main_loop_tlg;
int64_t ptimer_test_time_ns;
-/* Do not artificially limit period - see hw/core/ptimer.c. */
-int use_icount = 1;
+/* under qtest_enabled(), will not artificially limit period - see
hw/core/ptimer.c. */
+int use_icount;
bool qtest_allowed;
void timer_init_full(QEMUTimer *ts,
diff --git a/tests/test-timed-average.c b/tests/test-timed-average.c
index e2bcf5fe13..82c92500df 100644
--- a/tests/test-timed-average.c
+++ b/tests/test-timed-average.c
@@ -11,7 +11,7 @@
*/
#include "qemu/osdep.h"
-
+#include "sysemu/cpu-timers.h"
#include "qemu/timed-average.h"
/* This is the clock for QEMU_CLOCK_VIRTUAL */
diff --git a/util/main-loop.c b/util/main-loop.c
index 217c8d6056..0c5fe0107e 100644
--- a/util/main-loop.c
+++ b/util/main-loop.c
@@ -27,7 +27,7 @@
#include "qemu/cutils.h"
#include "qemu/timer.h"
#include "sysemu/qtest.h"
-#include "sysemu/cpus.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/replay.h"
#include "qemu/main-loop.h"
#include "block/aio.h"
@@ -521,9 +521,13 @@ void main_loop_wait(int nonblocking)
mlpoll.state = ret < 0 ? MAIN_LOOP_POLL_ERR : MAIN_LOOP_POLL_OK;
notifier_list_notify(&main_loop_poll_notifiers, &mlpoll);
- /* CPU thread can infinitely wait for event after
- missing the warp */
- qemu_start_warp_timer();
+ if (icount_enabled()) {
+ /*
+ * CPU thread can infinitely wait for event after
+ * missing the warp
+ */
+ qemu_start_warp_timer();
+ }
qemu_clock_run_all_timers();
}
diff --git a/util/qemu-timer.c b/util/qemu-timer.c
index 878d80fd5e..aeb6b613b8 100644
--- a/util/qemu-timer.c
+++ b/util/qemu-timer.c
@@ -26,8 +26,10 @@
#include "qemu/main-loop.h"
#include "qemu/timer.h"
#include "qemu/lockable.h"
+#include "sysemu/cpu-timers.h"
#include "sysemu/replay.h"
#include "sysemu/cpus.h"
+#include "sysemu/qtest.h"
#ifdef CONFIG_POSIX
#include <pthread.h>
@@ -134,7 +136,7 @@ static void qemu_clock_init(QEMUClockType type,
QEMUTimerListNotifyCB *notify_cb
bool qemu_clock_use_for_deadline(QEMUClockType type)
{
- return !(use_icount && (type == QEMU_CLOCK_VIRTUAL));
+ return !(icount_enabled() && (type == QEMU_CLOCK_VIRTUAL));
}
void qemu_clock_notify(QEMUClockType type)
@@ -416,7 +418,7 @@ static bool timer_mod_ns_locked(QEMUTimerList *timer_list,
static void timerlist_rearm(QEMUTimerList *timer_list)
{
/* Interrupt execution to force deadline recalculation. */
- if (timer_list->clock->type == QEMU_CLOCK_VIRTUAL) {
+ if (icount_enabled() && timer_list->clock->type == QEMU_CLOCK_VIRTUAL) {
qemu_start_warp_timer();
}
timerlist_notify(timer_list);
@@ -633,8 +635,10 @@ int64_t qemu_clock_get_ns(QEMUClockType type)
return get_clock();
default:
case QEMU_CLOCK_VIRTUAL:
- if (use_icount) {
+ if (icount_enabled()) {
return cpu_get_icount();
+ } else if (qtest_enabled()) { /* for qtest_clock_warp */
+ return qtest_get_virtual_clock();
} else {
return cpu_get_clock();
}
--
2.26.2
- [PATCH v8 00/17] QEMU cpus.c refactoring part2, Claudio Fontana, 2020/09/16
- [PATCH v8 02/17] icount: rename functions to be consistent with the module name, Claudio Fontana, 2020/09/16
- [PATCH v8 04/17] cpus: extract out TCG-specific code to accel/tcg, Claudio Fontana, 2020/09/16
- [PATCH v8 01/17] cpu-timers, icount: new modules,
Claudio Fontana <=
- [PATCH v8 06/17] cpus: extract out kvm-specific code to accel/kvm, Claudio Fontana, 2020/09/16
- [PATCH v8 05/17] cpus: extract out qtest-specific code to accel/qtest, Claudio Fontana, 2020/09/16
- [PATCH v8 03/17] cpus: prepare new CpusAccel cpu accelerator interface, Claudio Fontana, 2020/09/16
- [PATCH v8 07/17] cpus: extract out hax-specific code to target/i386/, Claudio Fontana, 2020/09/16
- [PATCH v8 10/17] cpus: cleanup now unneeded includes, Claudio Fontana, 2020/09/16
- [PATCH v8 08/17] cpus: extract out whpx-specific code to target/i386/, Claudio Fontana, 2020/09/16
- [PATCH v8 09/17] cpus: extract out hvf-specific code to target/i386/hvf/, Claudio Fontana, 2020/09/16
- [PATCH v8 12/17] cpus: add handle_interrupt to the CpusAccel interface, Claudio Fontana, 2020/09/16
- [PATCH v8 11/17] cpus: remove checks for non-NULL cpus_accel, Claudio Fontana, 2020/09/16
- [PATCH v8 15/17] hax: remove hax specific functions from global includes, Claudio Fontana, 2020/09/16