[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v5 4/8] s390/sclp: check sccb len before filling in data
From: |
Collin Walling |
Subject: |
[PATCH v5 4/8] s390/sclp: check sccb len before filling in data |
Date: |
Thu, 10 Sep 2020 05:36:51 -0400 |
The SCCB must be checked for a sufficient length before it is filled
with any data. If the length is insufficient, then the SCLP command
is suppressed and the proper response code is set in the SCCB header.
While we're at it, let's cleanup the length check by placing the
calculation inside a macro.
Fixes: 832be0d8a3bb ("s390x: sclp: Report insufficient SCCB length")
Signed-off-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/s390x/sclp.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/hw/s390x/sclp.c b/hw/s390x/sclp.c
index cb8e2e8ec3..12829bdd05 100644
--- a/hw/s390x/sclp.c
+++ b/hw/s390x/sclp.c
@@ -78,6 +78,8 @@ static void prepare_cpu_entries(MachineState *ms, CPUEntry
*entry, int *count)
}
}
+#define SCCB_REQ_LEN(s, max_cpus) (sizeof(s) + max_cpus * sizeof(CPUEntry))
+
/* Provide information about the configuration, CPUs and storage */
static void read_SCP_info(SCLPDevice *sclp, SCCB *sccb)
{
@@ -86,6 +88,12 @@ static void read_SCP_info(SCLPDevice *sclp, SCCB *sccb)
int cpu_count;
int rnsize, rnmax;
IplParameterBlock *ipib = s390_ipl_get_iplb();
+ int required_len = SCCB_REQ_LEN(ReadInfo, machine->possible_cpus->len);
+
+ if (be16_to_cpu(sccb->h.length) < required_len) {
+ sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
+ return;
+ }
/* CPU information */
prepare_cpu_entries(machine, read_info->entries, &cpu_count);
@@ -95,12 +103,6 @@ static void read_SCP_info(SCLPDevice *sclp, SCCB *sccb)
read_info->ibc_val = cpu_to_be32(s390_get_ibc_val());
- if (be16_to_cpu(sccb->h.length) <
- (sizeof(ReadInfo) + cpu_count * sizeof(CPUEntry))) {
- sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
- return;
- }
-
/* Configuration Characteristic (Extension) */
s390_get_feat_block(S390_FEAT_TYPE_SCLP_CONF_CHAR,
read_info->conf_char);
@@ -146,18 +148,18 @@ static void sclp_read_cpu_info(SCLPDevice *sclp, SCCB
*sccb)
MachineState *machine = MACHINE(qdev_get_machine());
ReadCpuInfo *cpu_info = (ReadCpuInfo *) sccb;
int cpu_count;
+ int required_len = SCCB_REQ_LEN(ReadCpuInfo, machine->possible_cpus->len);
+
+ if (be16_to_cpu(sccb->h.length) < required_len) {
+ sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
+ return;
+ }
prepare_cpu_entries(machine, cpu_info->entries, &cpu_count);
cpu_info->nr_configured = cpu_to_be16(cpu_count);
cpu_info->offset_configured = cpu_to_be16(offsetof(ReadCpuInfo, entries));
cpu_info->nr_standby = cpu_to_be16(0);
- if (be16_to_cpu(sccb->h.length) <
- (sizeof(ReadCpuInfo) + cpu_count * sizeof(CPUEntry))) {
- sccb->h.response_code = cpu_to_be16(SCLP_RC_INSUFFICIENT_SCCB_LENGTH);
- return;
- }
-
/* The standby offset is 16-byte for each CPU */
cpu_info->offset_standby = cpu_to_be16(cpu_info->offset_configured
+ cpu_info->nr_configured*sizeof(CPUEntry));
--
2.26.2
[PATCH v5 8/8] s390: guest support for diagnose 0x318, Collin Walling, 2020/09/10