qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v4 0/9] Fix scsi devices plug/unplug races w.r.t virtio-scsi ioth


From: Maxim Levitsky
Subject: [PATCH v4 0/9] Fix scsi devices plug/unplug races w.r.t virtio-scsi iothread
Date: Mon, 31 Aug 2020 18:01:15 +0300

Hi!

This is a patch series that is a result of my discussion with Paulo on
how to correctly fix the root cause of the BZ #1812399.

The root cause of this bug is the fact that IO thread is running mostly
unlocked versus main thread on which device hotplug is done.

qdev_device_add first creates the device object, then places it on the bus,
and only then realizes it.

However some drivers and currently only virtio-scsi enumerate its child bus
devices on each request that is received from the guest and that can happen on 
the IO
thread.

Thus we have a window when new device is on the bus but not realized and can be 
accessed
by the virtio-scsi driver in that state.

Fix that by doing two things:

1. Add partial RCU protection to the list of a bus's child devices.
This allows the scsi IO thread to safely enumerate the child devices
while it races with the hotplug placing the device on the bus.

2. Let scsi_device_find not return devices that are on the bus but not realized

Note that in the particular bug report the issue wasn't a race but rather due
to combination of things, the .realize code in the middle managed to trigger IO 
on the virtqueue
which caused the virtio-scsi driver to access the half realized device. However
since this can happen as well with real IO thread, this patch series was done,
which fixes this as well.

Changes from V3:

* Rebased to latest qemu

* Added a new patch to fix related race in scsi_target_emulate_report_luns

* Moved the non-realized device check to scsi core, since there is no
  way a device driver will want to see non realized devices on a scsi bus.
  (scsi-bus still needs this and can using an internal function)

* Splitted patch that added drain_rcu and used it, to patch that only adds it, 
and one
  that uses it (no other changes so I kept Reviewed-by)

*Some tweaks to commits

This series was tested by adding a virtio-scsi drive with iothread,
then running fio stress job in the guest in a loop, and then adding/removing
the scsi drive on the host in the loop.
This test was failing usually on 1st iteration withouth this patch series,
and now it seems to work smoothly.

Best regards,
        Maxim Levitsky

Maxim Levitsky (9):
  scsi/scsi_bus: switch search direction in scsi_device_find
  rcu: Implement drain_call_rcu
  device_core: use drain_call_rcu in in hmp_device_del/qmp_device_add
  device-core: use RCU for list of childs of a bus
  device-core: use atomic_set on .realized property
  scsi/scsi-bus: scsi_device_find: don't return unrealized devices
  scsi/scsi_bus: Add scsi_device_get
  virtio-scsi: use scsi_device_get
  scsi/scsi_bus: fix races in REPORT LUNS

 hw/core/bus.c          |  28 +++++---
 hw/core/qdev.c         |  56 +++++++++++----
 hw/scsi/scsi-bus.c     | 151 ++++++++++++++++++++++++++---------------
 hw/scsi/virtio-scsi.c  |  27 +++++---
 include/hw/qdev-core.h |  11 +++
 include/hw/scsi/scsi.h |   1 +
 include/qemu/rcu.h     |   1 +
 qdev-monitor.c         |  22 ++++++
 util/rcu.c             |  55 +++++++++++++++
 9 files changed, 265 insertions(+), 87 deletions(-)

-- 
2.26.2





reply via email to

[Prev in Thread] Current Thread [Next in Thread]