Re: [PATCH v3 00/18] hw/block/nvme: bump to v1.3

[Klaus Jensen]

On Jul  6 08:12, Klaus Jensen wrote:
> From: Klaus Jensen <k.jensen@samsung.com>
> 
> This adds mandatory features of NVM Express v1.3 to the emulated NVMe
> device.
> 
> 
> v3:
>   * hw/block/nvme: additional tracing
>     - Reverse logic in nvme_cid(). (Philippe)
>     - Move nvme_cid() and nvme_sqid() to source file. (Philippe)
>   * hw/block/nvme: fix missing endian conversion
>     - Move this patch to very early in the series and fix the bug properly as
>       suggested by Philippe. Then let the change trickle down through
>       the series. (Philippe)
>   * hw/block/nvme: add remaining mandatory controller parameters
>     - Move the nvme_feature_{support,default} arrays to the source file.
>       (Philippe)
>     - Add a NVME_FID_MAX constant. (Philippe)
>   * hw/block/nvme: support the get/set features select and save fields
>     - Move the nvme_feature_cap array to the source file. (Philippe)
>   * hw/block/nvme: reject invalid nsid values in active namespace id list
>     - Rework the condition and add a comment and reference to the spec.
>       (Philippe)
>   * hw/block/nvme: provide the mandatory subnqn field
>     - Change to use strpadcpy(). (Philippe)
> 
>   Had to clear some R-b's due to functional changes.
> 
>   Missing review: 2, 3, 7, 12, 16, 17
> 
> 
> v2:
>   * hw/block/nvme: bump spec data structures to v1.3
>     - Shorten some constants. (Dmitry)
>   * hw/block/nvme: add temperature threshold feature
>     - Remove unused temp_thresh member. (Dmitry)
>   * hw/block/nvme: add support for the get log page command
>     - Change the temperature field in the NvmeSmartLog struct to be an
>       uint16_t and handle wierd alignment by adding QEMU_PACKED to the
>       struct. (Dmitry)
>   * hw/block/nvme: add remaining mandatory controller parameters
>     - Fix spelling. (Dmitry)
>   * hw/block/nvme: support the get/set features select and save fields
>     - Fix bad logic causing temperature thresholds to always report
>       defaults. (Dmitry)
>   * hw/block/nvme: reject invalid nsid values in active namespace id list
>     - Added patch; reject the 0xfffffffe and 0xffffffff nsid values.
> 
> 
> $ git-backport-diff -u for-master/bump-to-v1.3-v2 -r upstream/master... -S
> Key:
> [----] : patches are identical
> [####] : number of functional differences between upstream/downstream patch
> [down] : patch is downstream-only
> The flags [FC] indicate (F)unctional and (C)ontextual differences, 
> respectively
> 
> 001/18:[----] [--] 'hw/block/nvme: bump spec data structures to v1.3'
> 002/18:[0008] [FC] 'hw/block/nvme: fix missing endian conversion'
> 003/18:[0028] [FC] 'hw/block/nvme: additional tracing'
> 004/18:[----] [--] 'hw/block/nvme: add support for the abort command'
> 005/18:[0004] [FC] 'hw/block/nvme: add temperature threshold feature'
> 006/18:[----] [--] 'hw/block/nvme: mark fw slot 1 as read-only'
> 007/18:[----] [--] 'hw/block/nvme: add support for the get log page command'
> 008/18:[0002] [FC] 'hw/block/nvme: add support for the asynchronous event 
> request command'
> 009/18:[----] [--] 'hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h'
> 010/18:[----] [--] 'hw/block/nvme: flush write cache when disabled'
> 011/18:[0044] [FC] 'hw/block/nvme: add remaining mandatory controller 
> parameters'
> 012/18:[0024] [FC] 'hw/block/nvme: support the get/set features select and 
> save fields'
> 013/18:[----] [--] 'hw/block/nvme: make sure ncqr and nsqr is valid'
> 014/18:[----] [--] 'hw/block/nvme: support identify namespace descriptor list'
> 015/18:[0008] [FC] 'hw/block/nvme: reject invalid nsid values in active 
> namespace id list'
> 016/18:[----] [--] 'hw/block/nvme: enforce valid queue creation sequence'
> 017/18:[0006] [FC] 'hw/block/nvme: provide the mandatory subnqn field'
> 018/18:[----] [--] 'hw/block/nvme: bump supported version to v1.3'
> 
> 
> Klaus Jensen (18):
>   hw/block/nvme: bump spec data structures to v1.3
>   hw/block/nvme: fix missing endian conversion
>   hw/block/nvme: additional tracing
>   hw/block/nvme: add support for the abort command
>   hw/block/nvme: add temperature threshold feature
>   hw/block/nvme: mark fw slot 1 as read-only
>   hw/block/nvme: add support for the get log page command
>   hw/block/nvme: add support for the asynchronous event request command
>   hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h
>   hw/block/nvme: flush write cache when disabled
>   hw/block/nvme: add remaining mandatory controller parameters
>   hw/block/nvme: support the get/set features select and save fields
>   hw/block/nvme: make sure ncqr and nsqr is valid
>   hw/block/nvme: support identify namespace descriptor list
>   hw/block/nvme: reject invalid nsid values in active namespace id list
>   hw/block/nvme: enforce valid queue creation sequence
>   hw/block/nvme: provide the mandatory subnqn field
>   hw/block/nvme: bump supported version to v1.3
> 
>  block/nvme.c          |  18 +-
>  hw/block/nvme.c       | 676 ++++++++++++++++++++++++++++++++++++++++--
>  hw/block/nvme.h       |  22 +-
>  hw/block/trace-events |  27 +-
>  include/block/nvme.h  | 225 +++++++++++---
>  5 files changed, 892 insertions(+), 76 deletions(-)
> 
> -- 
> 2.27.0
> 
> 

Thanks for the reviews everyone, applied to nvme-next.


Klaus