[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 21/25] hw/arm/tosa.c: Detabify
From: |
Peter Maydell |
Subject: |
[PULL 21/25] hw/arm/tosa.c: Detabify |
Date: |
Mon, 13 Jul 2020 15:11:00 +0100 |
Remove the hardcoded tabs from hw/arm/tosa.c. There aren't
many, but since they're all in constant #defines they're not
going to go away with our usual "only when we touch a function"
policy on reformatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628203748.14250-2-peter.maydell@linaro.org
---
hw/arm/tosa.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c
index 5dee2d76c61..06ecf1e7824 100644
--- a/hw/arm/tosa.c
+++ b/hw/arm/tosa.c
@@ -26,32 +26,32 @@
#include "hw/sysbus.h"
#include "exec/address-spaces.h"
-#define TOSA_RAM 0x04000000
-#define TOSA_ROM 0x00800000
+#define TOSA_RAM 0x04000000
+#define TOSA_ROM 0x00800000
-#define TOSA_GPIO_USB_IN (5)
-#define TOSA_GPIO_nSD_DETECT (9)
-#define TOSA_GPIO_ON_RESET (19)
-#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
-#define TOSA_GPIO_CF_CD (13)
-#define TOSA_GPIO_TC6393XB_INT (15)
-#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
+#define TOSA_GPIO_USB_IN (5)
+#define TOSA_GPIO_nSD_DETECT (9)
+#define TOSA_GPIO_ON_RESET (19)
+#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
+#define TOSA_GPIO_CF_CD (13)
+#define TOSA_GPIO_TC6393XB_INT (15)
+#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
-#define TOSA_SCOOP_GPIO_BASE 1
-#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
+#define TOSA_SCOOP_GPIO_BASE 1
+#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4)
-#define TOSA_SCOOP_JC_GPIO_BASE 1
-#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define TOSA_SCOOP_JC_GPIO_BASE 1
+#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5)
+#define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7)
-#define DAC_BASE 0x4e
-#define DAC_CH1 0
-#define DAC_CH2 1
+#define DAC_BASE 0x4e
+#define DAC_CH1 0
+#define DAC_CH2 1
static void tosa_microdrive_attach(PXA2xxState *cpu)
{
--
2.20.1
- [PULL 10/25] build: Check that mlockall() exists, (continued)
- [PULL 10/25] build: Check that mlockall() exists, Peter Maydell, 2020/07/13
- [PULL 11/25] osdep.h: Always include <sys/signal.h> if it exists, Peter Maydell, 2020/07/13
- [PULL 12/25] osdep.h: For Haiku, define SIGIO as equivalent to SIGPOLL, Peter Maydell, 2020/07/13
- [PULL 14/25] util/compatfd.c: Only include <sys/syscall.h> if CONFIG_SIGNALFD, Peter Maydell, 2020/07/13
- [PULL 13/25] bswap.h: Include <endian.h> on Haiku for bswap operations, Peter Maydell, 2020/07/13
- [PULL 15/25] util/oslib-posix.c: Implement qemu_init_exec_dir() for Haiku, Peter Maydell, 2020/07/13
- [PULL 16/25] util/drm: make portable by avoiding struct dirent d_type, Peter Maydell, 2020/07/13
- [PULL 18/25] target/nios2: in line the semantics of DISAS_UPDATE with other targets, Peter Maydell, 2020/07/13
- [PULL 17/25] target/nios2: add DISAS_NORETURN case for nothing more to generate, Peter Maydell, 2020/07/13
- [PULL 22/25] hw/arm/tosa: Encapsulate misc GPIO handling in a device, Peter Maydell, 2020/07/13
- [PULL 21/25] hw/arm/tosa.c: Detabify,
Peter Maydell <=
- [PULL 23/25] hw/arm/palm.c: Detabify, Peter Maydell, 2020/07/13
- [PULL 19/25] target/nios2: Use gen_io_start around wrctl instruction, Peter Maydell, 2020/07/13
- [PULL 20/25] hw/nios2: exit to main CPU loop only when unmasking interrupts, Peter Maydell, 2020/07/13
- [PULL 24/25] hw/arm/palm.c: Encapsulate misc GPIO handling in a device, Peter Maydell, 2020/07/13
- [PULL 25/25] hw/arm/aspeed: Do not create and attach empty SD cards by default, Peter Maydell, 2020/07/13
- Re: [PULL 00/25] target-arm queue, Peter Maydell, 2020/07/13