Re: [PATCH QEMU v25 09/17] vfio: Add load state functions to SaveVMHandlers

[Alex Williamson]

On Sun, 21 Jun 2020 01:51:18 +0530
Kirti Wankhede <kwankhede@nvidia.com> wrote:

> Sequence  during _RESUMING device state:
> While data for this device is available, repeat below steps:
> a. read data_offset from where user application should write data.
> b. write data of data_size to migration region from data_offset.
> c. write data_size which indicates vendor driver that data is written in
>    staging buffer.
> 
> For user, data is opaque. User should write data in the same order as
> received.
> 
> Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
> Reviewed-by: Neo Jia <cjia@nvidia.com>
> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
>  hw/vfio/migration.c  | 177 
> +++++++++++++++++++++++++++++++++++++++++++++++++++
>  hw/vfio/trace-events |   3 +
>  2 files changed, 180 insertions(+)
> 
> diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
> index ef1150c1ff02..faacea5327cb 100644
> --- a/hw/vfio/migration.c
> +++ b/hw/vfio/migration.c
> @@ -302,6 +302,33 @@ static int vfio_save_device_config_state(QEMUFile *f, 
> void *opaque)
>      return qemu_file_get_error(f);
>  }
>  
> +static int vfio_load_device_config_state(QEMUFile *f, void *opaque)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    uint64_t data;
> +
> +    if (vbasedev->ops && vbasedev->ops->vfio_load_config) {
> +        int ret;
> +
> +        ret = vbasedev->ops->vfio_load_config(vbasedev, f);
> +        if (ret) {
> +            error_report("%s: Failed to load device config space",
> +                         vbasedev->name);
> +            return ret;
> +        }
> +    }
> +
> +    data = qemu_get_be64(f);
> +    if (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +        error_report("%s: Failed loading device config space, "
> +                     "end flag incorrect 0x%"PRIx64, vbasedev->name, data);
> +        return -EINVAL;
> +    }
> +
> +    trace_vfio_load_device_config_state(vbasedev->name);
> +    return qemu_file_get_error(f);
> +}
> +
>  /* ---------------------------------------------------------------------- */
>  
>  static int vfio_save_setup(QEMUFile *f, void *opaque)
> @@ -472,12 +499,162 @@ static int vfio_save_complete_precopy(QEMUFile *f, 
> void *opaque)
>      return ret;
>  }
>  
> +static int vfio_load_setup(QEMUFile *f, void *opaque)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    VFIOMigration *migration = vbasedev->migration;
> +    int ret = 0;
> +
> +    if (migration->region.mmaps) {
> +        ret = vfio_region_mmap(&migration->region);
> +        if (ret) {
> +            error_report("%s: Failed to mmap VFIO migration region %d: %s",
> +                         vbasedev->name, migration->region.nr,
> +                         strerror(-ret));
> +            return ret;


Not fatal.


> +        }
> +    }
> +
> +    ret = vfio_migration_set_state(vbasedev, ~VFIO_DEVICE_STATE_MASK,
> +                                   VFIO_DEVICE_STATE_RESUMING);
> +    if (ret) {
> +        error_report("%s: Failed to set state RESUMING", vbasedev->name);
> +    }
> +    return ret;
> +}
> +
> +static int vfio_load_cleanup(void *opaque)
> +{
> +    vfio_save_cleanup(opaque);
> +    return 0;
> +}
> +
> +static int vfio_load_state(QEMUFile *f, void *opaque, int version_id)
> +{
> +    VFIODevice *vbasedev = opaque;
> +    VFIOMigration *migration = vbasedev->migration;
> +    int ret = 0;
> +    uint64_t data, data_size;
> +
> +    data = qemu_get_be64(f);
> +    while (data != VFIO_MIG_FLAG_END_OF_STATE) {
> +
> +        trace_vfio_load_state(vbasedev->name, data);
> +
> +        switch (data) {
> +        case VFIO_MIG_FLAG_DEV_CONFIG_STATE:
> +        {
> +            ret = vfio_load_device_config_state(f, opaque);
> +            if (ret) {
> +                return ret;
> +            }
> +            break;
> +        }
> +        case VFIO_MIG_FLAG_DEV_SETUP_STATE:
> +        {
> +            data = qemu_get_be64(f);
> +            if (data == VFIO_MIG_FLAG_END_OF_STATE) {
> +                return ret;
> +            } else {
> +                error_report("%s: SETUP STATE: EOS not found 0x%"PRIx64,
> +                             vbasedev->name, data);
> +                return -EINVAL;

This is essentially just a compatibility failure, right?  For instance
some future version of QEMU might include additional data between these
markers that we don't understand and therefore we fail the migration.
Thanks,

Alex

> +            }
> +            break;
> +        }
> +        case VFIO_MIG_FLAG_DEV_DATA_STATE:
> +        {
> +            VFIORegion *region = &migration->region;
> +            uint64_t data_offset = 0, size;
> +
> +            data_size = size = qemu_get_be64(f);
> +            if (data_size == 0) {
> +                break;
> +            }
> +
> +            ret = pread(vbasedev->fd, &data_offset, sizeof(data_offset),
> +                        region->fd_offset +
> +                        offsetof(struct vfio_device_migration_info,
> +                        data_offset));
> +            if (ret != sizeof(data_offset)) {
> +                error_report("%s:Failed to get migration buffer data offset 
> %d",
> +                             vbasedev->name, ret);
> +                return -EINVAL;
> +            }
> +
> +            trace_vfio_load_state_device_data(vbasedev->name, data_offset,
> +                                              data_size);
> +
> +            while (size) {
> +                void *buf = NULL;
> +                uint64_t sec_size;
> +                bool buffer_mmaped;
> +
> +                buf = get_data_section_size(region, data_offset, size,
> +                                            &sec_size);
> +
> +                buffer_mmaped = (buf != NULL);
> +
> +                if (!buffer_mmaped) {
> +                    buf = g_try_malloc(sec_size);
> +                    if (!buf) {
> +                        error_report("%s: Error allocating buffer ", 
> __func__);
> +                        return -ENOMEM;
> +                    }
> +                }
> +
> +                qemu_get_buffer(f, buf, sec_size);
> +
> +                if (!buffer_mmaped) {
> +                    ret = pwrite(vbasedev->fd, buf, sec_size,
> +                                 region->fd_offset + data_offset);
> +                    g_free(buf);
> +
> +                    if (ret != sec_size) {
> +                        error_report("%s: Failed to set migration buffer %d",
> +                                vbasedev->name, ret);
> +                        return -EINVAL;
> +                    }
> +                }
> +                size -= sec_size;
> +                data_offset += sec_size;
> +            }
> +
> +            ret = pwrite(vbasedev->fd, &data_size, sizeof(data_size),
> +                         region->fd_offset +
> +                       offsetof(struct vfio_device_migration_info, 
> data_size));
> +            if (ret != sizeof(data_size)) {
> +                error_report("%s: Failed to set migration buffer data size 
> %d",
> +                             vbasedev->name, ret);
> +                return -EINVAL;
> +            }
> +            break;
> +        }
> +
> +        default:
> +            error_report("%s: Unknown tag 0x%"PRIx64, vbasedev->name, data);
> +            return -EINVAL;
> +        }
> +
> +        data = qemu_get_be64(f);
> +        ret = qemu_file_get_error(f);
> +        if (ret) {
> +            return ret;
> +        }
> +    }
> +
> +    return ret;
> +}
> +
>  static SaveVMHandlers savevm_vfio_handlers = {
>      .save_setup = vfio_save_setup,
>      .save_cleanup = vfio_save_cleanup,
>      .save_live_pending = vfio_save_pending,
>      .save_live_iterate = vfio_save_iterate,
>      .save_live_complete_precopy = vfio_save_complete_precopy,
> +    .load_setup = vfio_load_setup,
> +    .load_cleanup = vfio_load_cleanup,
> +    .load_state = vfio_load_state,
>  };
>  
>  /* ---------------------------------------------------------------------- */
> diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
> index 9a1c5e17d97f..4a4bd3ba9a2a 100644
> --- a/hw/vfio/trace-events
> +++ b/hw/vfio/trace-events
> @@ -157,3 +157,6 @@ vfio_save_device_config_state(const char *name) " (%s)"
>  vfio_save_pending(const char *name, uint64_t precopy, uint64_t postcopy, 
> uint64_t compatible) " (%s) precopy 0x%"PRIx64" postcopy 0x%"PRIx64" 
> compatible 0x%"PRIx64
>  vfio_save_iterate(const char *name, int data_size) " (%s) data_size %d"
>  vfio_save_complete_precopy(const char *name) " (%s)"
> +vfio_load_device_config_state(const char *name) " (%s)"
> +vfio_load_state(const char *name, uint64_t data) " (%s) data 0x%"PRIx64
> +vfio_load_state_device_data(const char *name, uint64_t data_offset, uint64_t 
> data_size) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64