qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v6 1/3] acpi: Some build_tpm2() code reshape


From: Auger Eric
Subject: Re: [PATCH v6 1/3] acpi: Some build_tpm2() code reshape
Date: Fri, 19 Jun 2020 17:34:50 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0

Hi Stefan,

On 6/19/20 5:07 PM, Stefan Berger wrote:
> On 6/19/20 10:18 AM, Eric Auger wrote:
>> Remove any reference to Acpi20TPM2 and adopt an implementation
>> similar to build_ghes_v2().
>>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>> Suggested-by: Igor Mammedov <imammedo@redhat.com>
>>
>> ---
>>
>> v5 -> v6:
>> - add reference to the spec + comment about LAML and LASA fields
>> - also moved LASA intro comment above build_append_int_noprefix()
>>    as requested by Igor
>> ---
>>   hw/acpi/aml-build.c | 54 +++++++++++++++++++++++++++++----------------
>>   1 file changed, 35 insertions(+), 19 deletions(-)
>>
>> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
>> index 2cb7b991ef..1cc08a3eb9 100644
>> --- a/hw/acpi/aml-build.c
>> +++ b/hw/acpi/aml-build.c
>> @@ -1878,48 +1878,64 @@ build_hdr:
>>                    "FACP", tbl->len - fadt_start, f->rev, oem_id,
>> oem_table_id);
>>   }
>>   +/*
>> + * build_tpm2 - Build the TPM2 table as specified in table 7 of
>> + * "TCG ACPI Specification; Family 1.2 and 2.0;
>> + * Level 00 Revision 00.37, December 19, 2014"
>> + * Note: the LASA and LAML fields are optional for TPM-2.0 (the above
>> + * table does not mention them) but are needed at least for SeaBIOS.
>> + * See the Acpi20TPM2 struct for the corresponding layout.
>> + */
>>   void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray
>> *tcpalog)
>>   {
>> -    Acpi20TPM2 *tpm2_ptr = acpi_data_push(table_data,
>> sizeof(AcpiTableHeader));
>> -    unsigned log_addr_size = sizeof(tpm2_ptr->log_area_start_address);
>> -    unsigned log_addr_offset =
>> -        (char *)&tpm2_ptr->log_area_start_address - table_data->data;
>>       uint8_t start_method_params[12] = {};
>> +    unsigned log_addr_offset, tpm2_start;
>> +    uint64_t control_area_start_address;
>>       TPMIf *tpmif = tpm_find();
>> +    uint32_t start_method;
>> +    void *tpm2_ptr;
>>   -    /* platform class */
>> +    tpm2_start = table_data->len;
>> +    tpm2_ptr = acpi_data_push(table_data, sizeof(AcpiTableHeader));
>> +
>> +    /* Platform Class */
>>       build_append_int_noprefix(table_data, TPM2_ACPI_CLASS_CLIENT, 2);
>> -    /* reserved */
>> +    /* Reserved */
>>       build_append_int_noprefix(table_data, 0, 2);
>>       if (TPM_IS_TIS_ISA(tpmif) || TPM_IS_TIS_SYSBUS(tpmif)) {
>> -        /* address of control area */
>> -        build_append_int_noprefix(table_data, 0, 8);
>> -        /* start method */
>> -        build_append_int_noprefix(table_data, TPM2_START_METHOD_MMIO,
>> 4);
>> +        control_area_start_address = 0;
>> +        start_method = TPM2_START_METHOD_MMIO;
>>       } else if (TPM_IS_CRB(tpmif)) {
>> -        build_append_int_noprefix(table_data, TPM_CRB_ADDR_CTRL, 8);
>> -        build_append_int_noprefix(table_data, TPM2_START_METHOD_CRB, 4);
>> +        control_area_start_address = TPM_CRB_ADDR_CTRL;
>> +        start_method = TPM2_START_METHOD_CRB;
>>       } else {
>> -        g_warn_if_reached();
>> +        g_assert_not_reached();
>>       }
>> +    /* Address of Control Area */
>> +    build_append_int_noprefix(table_data, control_area_start_address,
>> 8);
>> +    /* Start Method */
>> +    build_append_int_noprefix(table_data, start_method, 4);
>>   -    /* platform specific parameters */
>> -    g_array_append_vals(table_data, &start_method_params, 12);
>> +    /* Platform Specific Parameters */
>> +    g_array_append_vals(table_data, &start_method_params,
>> +                        ARRAY_SIZE(start_method_params));
>>   -    /* log area minimum length */
>> +    /* Log Area Minimum Length */
>>       build_append_int_noprefix(table_data, TPM_LOG_AREA_MINIMUM_SIZE,
>> 4);
>>         acpi_data_push(tcpalog, TPM_LOG_AREA_MINIMUM_SIZE);
>>       bios_linker_loader_alloc(linker, ACPI_BUILD_TPMLOG_FILE,
>> tcpalog, 1,
>>                                false);
>>   -    /* log area start address to be filled by Guest linker */
>> +    log_addr_offset = table_data->len;
>> +
> 
> Don't have to subtract tpm2_start from it ?
no that's the absolute offset. It was

unsigned log_addr_offset =
        (char *)&tpm2_ptr->log_area_start_address - table_data->data;

Thanks

Eric
> 
> 
>> +    /* Log Area Start Address to be filled by Guest linker */
>>       build_append_int_noprefix(table_data, 0, 8);
>>       bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
>> -                                   log_addr_offset, log_addr_size,
>> +                                   log_addr_offset, 8,
>>                                      ACPI_BUILD_TPMLOG_FILE, 0);
>>       build_header(linker, table_data,
>> -                 (void *)tpm2_ptr, "TPM2", sizeof(*tpm2_ptr), 4,
>> NULL, NULL);
>> +                 tpm2_ptr, "TPM2", table_data->len - tpm2_start, 4,
>> NULL, NULL);
>>   }
>>     /* ACPI 5.0: 6.4.3.8.2 Serial Bus Connection Descriptors */
> 
> 
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]