qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 1/4] target/mips: Legalize Loongson insn flags


From: Aleksandar Markovic
Subject: Re: [PATCH 1/4] target/mips: Legalize Loongson insn flags
Date: Sun, 14 Jun 2020 10:42:33 +0200

нед, 14. јун 2020. у 10:03 Jiaxun Yang <jiaxun.yang@flygoat.com> је написао/ла:
>
> To match the actual status of Loongson insn, we split flags
> for LMMI and LEXT from INSN_LOONGSON2F.
>
> As Loongson-2F only implemented interger part of LEXT, we'll
> not enable LEXT for the processor, but instead we're still using
> INSN_LOONGSON2F as switch flag of these instructions.
>
> All multimedia instructions have been moved to LMMI flag. Loongson-2F
> and Loongson-3A are sharing these instructions.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>

Applied to the next mips queue.

>  target/mips/mips-defs.h |  4 ++--
>  target/mips/translate.c | 13 +++++++------
>  2 files changed, 9 insertions(+), 8 deletions(-)
>
> diff --git a/target/mips/mips-defs.h b/target/mips/mips-defs.h
> index 0c129106c8..f1b833f947 100644
> --- a/target/mips/mips-defs.h
> +++ b/target/mips/mips-defs.h
> @@ -70,7 +70,7 @@
>  #define CPU_VR54XX      (CPU_MIPS4 | INSN_VR54XX)
>  #define CPU_R5900       (CPU_MIPS3 | INSN_R5900)
>  #define CPU_LOONGSON2E  (CPU_MIPS3 | INSN_LOONGSON2E)
> -#define CPU_LOONGSON2F  (CPU_MIPS3 | INSN_LOONGSON2F)
> +#define CPU_LOONGSON2F  (CPU_MIPS3 | INSN_LOONGSON2F | ASE_LMMI)
>
>  #define CPU_MIPS5       (CPU_MIPS4 | ISA_MIPS5)
>
> @@ -97,7 +97,7 @@
>  /* Wave Computing: "nanoMIPS" */
>  #define CPU_NANOMIPS32  (CPU_MIPS32R6 | ISA_NANOMIPS32)
>
> -#define CPU_LOONGSON3A  (CPU_MIPS64R2 | INSN_LOONGSON3A)
> +#define CPU_LOONGSON3A  (CPU_MIPS64R2 | INSN_LOONGSON3A | ASE_LMMI | 
> ASE_LEXT)
>
>  /*
>   * Strictly follow the architecture standard:
> diff --git a/target/mips/translate.c b/target/mips/translate.c
> index 2caf4cba5a..e49f32f6ae 100644
> --- a/target/mips/translate.c
> +++ b/target/mips/translate.c
> @@ -1046,7 +1046,7 @@ enum {
>      OPC_BC2NEZ  = (0x0D << 21) | OPC_CP2,
>  };
>
> -#define MASK_LMI(op)    (MASK_OP_MAJOR(op) | (op & (0x1F << 21)) | (op & 
> 0x1F))
> +#define MASK_LMMI(op)    (MASK_OP_MAJOR(op) | (op & (0x1F << 21)) | (op & 
> 0x1F))
>
>  enum {
>      OPC_PADDSH      = (24 << 21) | (0x00) | OPC_CP2,
> @@ -3421,7 +3421,8 @@ static void gen_ld(DisasContext *ctx, uint32_t opc,
>      TCGv t0, t1, t2;
>      int mem_idx = ctx->mem_idx;
>
> -    if (rt == 0 && ctx->insn_flags & (INSN_LOONGSON2E | INSN_LOONGSON2F)) {
> +    if (rt == 0 && ctx->insn_flags & (INSN_LOONGSON2E | INSN_LOONGSON2F |
> +                                      INSN_LOONGSON3A)) {
>          /*
>           * Loongson CPU uses a load to zero register for prefetch.
>           * We emulate it as a NOP. On other CPU we must perform the
> @@ -5531,7 +5532,7 @@ static void gen_loongson_multimedia(DisasContext *ctx, 
> int rd, int rs, int rt)
>      TCGv_i64 t0, t1;
>      TCGCond cond;
>
> -    opc = MASK_LMI(ctx->opcode);
> +    opc = MASK_LMMI(ctx->opcode);
>      switch (opc) {
>      case OPC_ADD_CP2:
>      case OPC_SUB_CP2:
> @@ -27161,7 +27162,7 @@ static void decode_opc_special2_legacy(CPUMIPSState 
> *env, DisasContext *ctx)
>      case OPC_MULTU_G_2F:
>      case OPC_MOD_G_2F:
>      case OPC_MODU_G_2F:
> -        check_insn(ctx, INSN_LOONGSON2F);
> +        check_insn(ctx, INSN_LOONGSON2F | ASE_LEXT);
>          gen_loongson_integer(ctx, op1, rd, rs, rt);
>          break;
>      case OPC_CLO:
> @@ -27194,7 +27195,7 @@ static void decode_opc_special2_legacy(CPUMIPSState 
> *env, DisasContext *ctx)
>      case OPC_DDIVU_G_2F:
>      case OPC_DMOD_G_2F:
>      case OPC_DMODU_G_2F:
> -        check_insn(ctx, INSN_LOONGSON2F);
> +        check_insn(ctx, INSN_LOONGSON2F | ASE_LEXT);
>          gen_loongson_integer(ctx, op1, rd, rs, rt);
>          break;
>  #endif
> @@ -30641,7 +30642,7 @@ static void decode_opc(CPUMIPSState *env, 
> DisasContext *ctx)
>          }
>          break;
>      case OPC_CP2:
> -        check_insn(ctx, INSN_LOONGSON2F);
> +        check_insn(ctx, ASE_LMMI);
>          /* Note that these instructions use different fields.  */
>          gen_loongson_multimedia(ctx, sa, rd, rt);
>          break;
> --
> 2.27.0



reply via email to

[Prev in Thread] Current Thread [Next in Thread]