[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH] vhost-user: add support for VHOST_USER_SET_STATUS
From: |
Michael S. Tsirkin |
Subject: |
Re: [PATCH] vhost-user: add support for VHOST_USER_SET_STATUS |
Date: |
Thu, 14 May 2020 06:51:36 -0400 |
On Thu, May 14, 2020 at 12:14:32PM +0200, Maxime Coquelin wrote:
>
>
> On 5/14/20 9:53 AM, Jason Wang wrote:
> >
> > On 2020/5/14 下午3:33, Maxime Coquelin wrote:
> >> It is usefull for the Vhost-user backend to know
> >> about about the Virtio device status updates,
> >> especially when the driver sets the DRIVER_OK bit.
> >>
> >> With that information, no more need to do hazardous
> >> assumptions on when the driver is done with the
> >> device configuration.
> >>
> >> Signed-off-by: Maxime Coquelin <address@hidden>
> >> ---
> >>
> >> This patch applies on top of Cindy's "vDPA support in qemu"
> >> series, which introduces the .vhost_set_state vhost-backend
> >> ops.
> >>
> >> docs/interop/vhost-user.rst | 12 ++++++++++++
> >> hw/net/vhost_net.c | 10 +++++-----
> >> hw/virtio/vhost-user.c | 35 +++++++++++++++++++++++++++++++++++
> >> 3 files changed, 52 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst
> >> index 3b1b6602c7..f108de7458 100644
> >> --- a/docs/interop/vhost-user.rst
> >> +++ b/docs/interop/vhost-user.rst
> >> @@ -815,6 +815,7 @@ Protocol features
> >> #define VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD 12
> >> #define VHOST_USER_PROTOCOL_F_RESET_DEVICE 13
> >> #define VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS 14
> >> + #define VHOST_USER_PROTOCOL_F_STATUS 15
> >> Master message types
> >> --------------------
> >> @@ -1263,6 +1264,17 @@ Master message types
> >> The state.num field is currently reserved and must be set to 0.
> >> +``VHOST_USER_SET_STATUS``
> >> + :id: 36
> >> + :equivalent ioctl: VHOST_VDPA_SET_STATUS
> >> + :slave payload: N/A
> >> + :master payload: ``u64``
> >> +
> >> + When the ``VHOST_USER_PROTOCOL_F_STATUS`` protocol feature has been
> >> + successfully negotiated, this message is submitted by the master to
> >> + notify the backend with updated device status as defined in the Virtio
> >> + specification.
> >> +
> >> Slave message types
> >> -------------------
> >> diff --git a/hw/net/vhost_net.c b/hw/net/vhost_net.c
> >> index 463e333531..37f3156dbc 100644
> >> --- a/hw/net/vhost_net.c
> >> +++ b/hw/net/vhost_net.c
> >> @@ -517,10 +517,10 @@ int vhost_set_state(NetClientState *nc, int state)
> >> {
> >> struct vhost_net *net = get_vhost_net(nc);
> >> struct vhost_dev *hdev = &net->dev;
> >> - if (nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA) {
> >> - if (hdev->vhost_ops->vhost_set_state) {
> >> - return hdev->vhost_ops->vhost_set_state(hdev, state);
> >> - }
> >> - }
> >> +
> >> + if (hdev->vhost_ops->vhost_set_state) {
> >> + return hdev->vhost_ops->vhost_set_state(hdev, state);
> >> + }
> >> +
> >> return 0;
> >> }
> >> diff --git a/hw/virtio/vhost-user.c b/hw/virtio/vhost-user.c
> >> index ec21e8fbe8..b7e52d97fc 100644
> >> --- a/hw/virtio/vhost-user.c
> >> +++ b/hw/virtio/vhost-user.c
> >> @@ -59,6 +59,7 @@ enum VhostUserProtocolFeature {
> >> VHOST_USER_PROTOCOL_F_HOST_NOTIFIER = 11,
> >> VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD = 12,
> >> VHOST_USER_PROTOCOL_F_RESET_DEVICE = 13,
> >> + VHOST_USER_PROTOCOL_F_STATUS = 15,
> >> VHOST_USER_PROTOCOL_F_MAX
> >> };
> >> @@ -100,6 +101,7 @@ typedef enum VhostUserRequest {
> >> VHOST_USER_SET_INFLIGHT_FD = 32,
> >> VHOST_USER_GPU_SET_SOCKET = 33,
> >> VHOST_USER_RESET_DEVICE = 34,
> >> + VHOST_USER_SET_STATUS = 36,
> >> VHOST_USER_MAX
> >> } VhostUserRequest;
> >> @@ -1886,6 +1888,38 @@ static int vhost_user_set_inflight_fd(struct
> >> vhost_dev *dev,
> >> return 0;
> >> }
> >> +static int vhost_user_set_state(struct vhost_dev *dev, int state)
> >> +{
> >> + bool reply_supported = virtio_has_feature(dev->protocol_features,
> >> +
> >> VHOST_USER_PROTOCOL_F_REPLY_ACK);
> >> +
> >> + VhostUserMsg msg = {
> >> + .hdr.request = VHOST_USER_SET_STATUS,
> >> + .hdr.flags = VHOST_USER_VERSION,
> >> + .hdr.size = sizeof(msg.payload.u64),
> >> + .payload.u64 = (uint64_t)state,
> >> + };
> >> +
> >> + if (!virtio_has_feature(dev->protocol_features,
> >> + VHOST_USER_PROTOCOL_F_STATUS)) {
> >> + return -1;
> >> + }
> >> +
> >> + if (reply_supported) {
> >> + msg.hdr.flags |= VHOST_USER_NEED_REPLY_MASK;
> >> + }
> >> +
> >> + if (vhost_user_write(dev, &msg, NULL, 0) < 0) {
> >> + return -1;
> >> + }
> >> +
> >> + if (reply_supported) {
> >> + return process_message_reply(dev, &msg);
> >> + }
> >> +
> >> + return 0;
> >> +}
> >
> >
> > Interesting, I wonder how vm stop will be handled in this case.
>
> For now, my DPDK series only use DRIVER_OK to help determine when the
> driver is done with the initialization. For VM stop, it still relies on
> GET_VRING_BASE.
Sounds like a good fit.
GET_VRING_BASE is transparent to guest, as is vmstop.
This is more for driver
>
> GET_VRING_BASE arrives before DRIVER_OK bit is cleared is the tests I've
> done (logs from backend side):
One problem is with legacy guests, for these you can't rely
on DRIVER_OK, they often kick before that, and sometimes
expect buffers to be used too (e.g. for scsi).
>
> VHOST_CONFIG: read message VHOST_USER_GET_VRING_BASE
>
> destroy port /tmp/vhost-user1, did: 0
> VHOST_CONFIG: vring base idx:0 file:41
> VHOST_CONFIG: read message VHOST_USER_GET_VRING_BASE
> VHOST_CONFIG: vring base idx:1 file:0
> VHOST_CONFIG: read message VHOST_USER_SET_STATUS
> VHOST_CONFIG: New device status(0x0000000b):
> -ACKNOWLEDGE: 1
> -DRIVER: 1
> -FEATURES_OK: 1
> -DRIVER_OK: 0
> -DEVICE_NEED_RESET: 0
> -FAILED: 0
>
> > In the case of vDPA kernel, we probable don't want to mirror the virtio
> > device status to vdpa device status directly.
>
> In vDPA DPDK, we don't mirror the Virtio device status either. It could
> make sense to do that, but would require some API changes.
>
> > Since qemu may stop
> > vhost-vdpa device through e.g resting vdpa device, but in the mean time,
> > guest should not detect such condition in virtio device status.
>
>
>
> > So in the new version of vDPA support, we probably need to do:
> >
> > static int vhost_vdpa_set_state(struct vhost_dev *dev, bool started)
> > {
> > if (started) {
> > uint8_t status = 0;
> >
> > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
> > vhost_vdpa_call(dev, VHOST_VDPA_GET_STATUS, &status);
> >
> > return !(status & VIRTIO_CONFIG_S_DRIVER_OK);
> > } else {
> > vhost_vdpa_reset_device(dev);
> > vhost_vdpa_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE |
> > VIRTIO_CONFIG_S_DRIVER);
> > return 0;
> > }
> > }
>
> IIUC, you have another copy of the status register not matching 1:1 what
> the guest sets/sees.
>
> Is vhost_vdpa_add_status() sending VHOST_VDPA_SET_STATUS to the backend?
>
> And why reading back the status from the backend? Just to confirm the
> change is taken into account?
Making sure features have been acked makes sense IMHO.
> > And vhost_set_state() will be called from vhost_dev_start()/stop().
> >
> > Does this work for vhost-user as well?
>
> IIUC what you did above, I think it would work. And we won't need
> GET_STATUS request, but just rely on the REPLY_ACK.
Right. Need to document that though.
>
> Thanks,
> Maxime
>
> > Thanks
> >
> >
> >> +
> >> bool vhost_user_init(VhostUserState *user, CharBackend *chr, Error
> >> **errp)
> >> {
> >> if (user->chr) {
> >> @@ -1947,4 +1981,5 @@ const VhostOps user_ops = {
> >> .vhost_backend_mem_section_filter =
> >> vhost_user_mem_section_filter,
> >> .vhost_get_inflight_fd = vhost_user_get_inflight_fd,
> >> .vhost_set_inflight_fd = vhost_user_set_inflight_fd,
> >> + .vhost_set_state = vhost_user_set_state,
> >> };
Re: [PATCH] vhost-user: add support for VHOST_USER_SET_STATUS, Michael S. Tsirkin, 2020/05/14