[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v5 08/15] acpi: move aml builder code for floppy device
|
From: |
Gerd Hoffmann |
|
Subject: |
[PATCH v5 08/15] acpi: move aml builder code for floppy device |
|
Date: |
Thu, 7 May 2020 15:16:33 +0200 |
Signed-off-by: Gerd Hoffmann <address@hidden>
Reviewed-by: Igor Mammedov <address@hidden>
---
hw/block/fdc.c | 83 ++++++++++++++++++++++++++++++++++++++++++++
hw/i386/acpi-build.c | 83 --------------------------------------------
stubs/cmos.c | 7 ++++
stubs/Makefile.objs | 1 +
4 files changed, 91 insertions(+), 83 deletions(-)
create mode 100644 stubs/cmos.c
diff --git a/hw/block/fdc.c b/hw/block/fdc.c
index 9628cc171ef8..40faa088b5f7 100644
--- a/hw/block/fdc.c
+++ b/hw/block/fdc.c
@@ -32,6 +32,8 @@
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "qemu/timer.h"
+#include "hw/i386/pc.h"
+#include "hw/acpi/aml-build.h"
#include "hw/irq.h"
#include "hw/isa/isa.h"
#include "hw/qdev-properties.h"
@@ -2765,6 +2767,85 @@ void isa_fdc_get_drive_max_chs(FloppyDriveType type,
(*maxc)--;
}
+static Aml *build_fdinfo_aml(int idx, FloppyDriveType type)
+{
+ Aml *dev, *fdi;
+ uint8_t maxc, maxh, maxs;
+
+ isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs);
+
+ dev = aml_device("FLP%c", 'A' + idx);
+
+ aml_append(dev, aml_name_decl("_ADR", aml_int(idx)));
+
+ fdi = aml_package(16);
+ aml_append(fdi, aml_int(idx)); /* Drive Number */
+ aml_append(fdi,
+ aml_int(cmos_get_fd_drive_type(type))); /* Device Type */
+ /*
+ * the values below are the limits of the drive, and are thus independent
+ * of the inserted media
+ */
+ aml_append(fdi, aml_int(maxc)); /* Maximum Cylinder Number */
+ aml_append(fdi, aml_int(maxs)); /* Maximum Sector Number */
+ aml_append(fdi, aml_int(maxh)); /* Maximum Head Number */
+ /*
+ * SeaBIOS returns the below values for int 0x13 func 0x08 regardless of
+ * the drive type, so shall we
+ */
+ aml_append(fdi, aml_int(0xAF)); /* disk_specify_1 */
+ aml_append(fdi, aml_int(0x02)); /* disk_specify_2 */
+ aml_append(fdi, aml_int(0x25)); /* disk_motor_wait */
+ aml_append(fdi, aml_int(0x02)); /* disk_sector_siz */
+ aml_append(fdi, aml_int(0x12)); /* disk_eot */
+ aml_append(fdi, aml_int(0x1B)); /* disk_rw_gap */
+ aml_append(fdi, aml_int(0xFF)); /* disk_dtl */
+ aml_append(fdi, aml_int(0x6C)); /* disk_formt_gap */
+ aml_append(fdi, aml_int(0xF6)); /* disk_fill */
+ aml_append(fdi, aml_int(0x0F)); /* disk_head_sttl */
+ aml_append(fdi, aml_int(0x08)); /* disk_motor_strt */
+
+ aml_append(dev, aml_name_decl("_FDI", fdi));
+ return dev;
+}
+
+static void fdc_isa_build_aml(ISADevice *isadev, Aml *scope)
+{
+ Aml *dev;
+ Aml *crs;
+ int i;
+
+#define ACPI_FDE_MAX_FD 4
+ uint32_t fde_buf[5] = {
+ 0, 0, 0, 0, /* presence of floppy drives #0 - #3 */
+ cpu_to_le32(2) /* tape presence (2 == never present) */
+ };
+
+ crs = aml_resource_template();
+ aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04));
+ aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01));
+ aml_append(crs, aml_irq_no_flags(6));
+ aml_append(crs,
+ aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2));
+
+ dev = aml_device("FDC0");
+ aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700")));
+ aml_append(dev, aml_name_decl("_CRS", crs));
+
+ for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) {
+ FloppyDriveType type = isa_fdc_get_drive_type(isadev, i);
+
+ if (type < FLOPPY_DRIVE_TYPE_NONE) {
+ fde_buf[i] = cpu_to_le32(1); /* drive present */
+ aml_append(dev, build_fdinfo_aml(i, type));
+ }
+ }
+ aml_append(dev, aml_name_decl("_FDE",
+ aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf)));
+
+ aml_append(scope, dev);
+}
+
static const VMStateDescription vmstate_isa_fdc ={
.name = "fdc",
.version_id = 2,
@@ -2798,11 +2879,13 @@ static Property isa_fdc_properties[] = {
static void isabus_fdc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
+ ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
dc->realize = isabus_fdc_realize;
dc->fw_name = "fdc";
dc->reset = fdctrl_external_reset_isa;
dc->vmsd = &vmstate_isa_fdc;
+ isa->build_aml = fdc_isa_build_aml;
device_class_set_props(dc, isa_fdc_properties);
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
}
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 443db94deb5b..775936e28b9a 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -1058,85 +1058,6 @@ static void build_hpet_aml(Aml *table)
aml_append(table, scope);
}
-static Aml *build_fdinfo_aml(int idx, FloppyDriveType type)
-{
- Aml *dev, *fdi;
- uint8_t maxc, maxh, maxs;
-
- isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs);
-
- dev = aml_device("FLP%c", 'A' + idx);
-
- aml_append(dev, aml_name_decl("_ADR", aml_int(idx)));
-
- fdi = aml_package(16);
- aml_append(fdi, aml_int(idx)); /* Drive Number */
- aml_append(fdi,
- aml_int(cmos_get_fd_drive_type(type))); /* Device Type */
- /*
- * the values below are the limits of the drive, and are thus independent
- * of the inserted media
- */
- aml_append(fdi, aml_int(maxc)); /* Maximum Cylinder Number */
- aml_append(fdi, aml_int(maxs)); /* Maximum Sector Number */
- aml_append(fdi, aml_int(maxh)); /* Maximum Head Number */
- /*
- * SeaBIOS returns the below values for int 0x13 func 0x08 regardless of
- * the drive type, so shall we
- */
- aml_append(fdi, aml_int(0xAF)); /* disk_specify_1 */
- aml_append(fdi, aml_int(0x02)); /* disk_specify_2 */
- aml_append(fdi, aml_int(0x25)); /* disk_motor_wait */
- aml_append(fdi, aml_int(0x02)); /* disk_sector_siz */
- aml_append(fdi, aml_int(0x12)); /* disk_eot */
- aml_append(fdi, aml_int(0x1B)); /* disk_rw_gap */
- aml_append(fdi, aml_int(0xFF)); /* disk_dtl */
- aml_append(fdi, aml_int(0x6C)); /* disk_formt_gap */
- aml_append(fdi, aml_int(0xF6)); /* disk_fill */
- aml_append(fdi, aml_int(0x0F)); /* disk_head_sttl */
- aml_append(fdi, aml_int(0x08)); /* disk_motor_strt */
-
- aml_append(dev, aml_name_decl("_FDI", fdi));
- return dev;
-}
-
-static Aml *build_fdc_device_aml(ISADevice *fdc)
-{
- int i;
- Aml *dev;
- Aml *crs;
-
-#define ACPI_FDE_MAX_FD 4
- uint32_t fde_buf[5] = {
- 0, 0, 0, 0, /* presence of floppy drives #0 - #3 */
- cpu_to_le32(2) /* tape presence (2 == never present) */
- };
-
- dev = aml_device("FDC0");
- aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700")));
-
- crs = aml_resource_template();
- aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04));
- aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01));
- aml_append(crs, aml_irq_no_flags(6));
- aml_append(crs,
- aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2));
- aml_append(dev, aml_name_decl("_CRS", crs));
-
- for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) {
- FloppyDriveType type = isa_fdc_get_drive_type(fdc, i);
-
- if (type < FLOPPY_DRIVE_TYPE_NONE) {
- fde_buf[i] = cpu_to_le32(1); /* drive present */
- aml_append(dev, build_fdinfo_aml(i, type));
- }
- }
- aml_append(dev, aml_name_decl("_FDE",
- aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf)));
-
- return dev;
-}
-
static Aml *build_kbd_device_aml(void)
{
Aml *dev;
@@ -1175,7 +1096,6 @@ static Aml *build_mouse_device_aml(void)
static void build_isa_devices_aml(Aml *table)
{
- ISADevice *fdc = pc_find_fdc0();
bool ambiguous;
Aml *scope = aml_scope("_SB.PCI0.ISA");
@@ -1183,9 +1103,6 @@ static void build_isa_devices_aml(Aml *table)
aml_append(scope, build_kbd_device_aml());
aml_append(scope, build_mouse_device_aml());
- if (fdc) {
- aml_append(scope, build_fdc_device_aml(fdc));
- }
if (ambiguous) {
error_report("Multiple ISA busses, unable to define IPMI ACPI data");
diff --git a/stubs/cmos.c b/stubs/cmos.c
new file mode 100644
index 000000000000..416cbe4055ff
--- /dev/null
+++ b/stubs/cmos.c
@@ -0,0 +1,7 @@
+#include "qemu/osdep.h"
+#include "hw/i386/pc.h"
+
+int cmos_get_fd_drive_type(FloppyDriveType fd0)
+{
+ return 0;
+}
diff --git a/stubs/Makefile.objs b/stubs/Makefile.objs
index 45be5dc0ed78..3cbe472d1c6c 100644
--- a/stubs/Makefile.objs
+++ b/stubs/Makefile.objs
@@ -3,6 +3,7 @@ stub-obj-y += bdrv-next-monitor-owned.o
stub-obj-y += blk-commit-all.o
stub-obj-y += blockdev-close-all-bdrv-states.o
stub-obj-y += clock-warp.o
+stub-obj-y += cmos.o
stub-obj-y += cpu-get-clock.o
stub-obj-y += cpu-get-icount.o
stub-obj-y += dump.o
--
2.18.4