Re: [PATCH v16 QEMU 04/16] vfio: Add save and load functions for VFIO PCI devices

[Longpeng (Mike, Cloud Infrastructure Service Product Dept.)]

On 2020/3/25 5:09, Kirti Wankhede wrote:
> These functions save and restore PCI device specific data - config
> space of PCI device.
> Tested save and restore with MSI and MSIX type.
> 
> Signed-off-by: Kirti Wankhede <address@hidden>
> Reviewed-by: Neo Jia <address@hidden>
> ---
>  hw/vfio/pci.c                 | 163 
> ++++++++++++++++++++++++++++++++++++++++++
>  include/hw/vfio/vfio-common.h |   2 +
>  2 files changed, 165 insertions(+)
> 
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 6c77c12e44b9..8deb11e87ef7 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -41,6 +41,7 @@
>  #include "trace.h"
>  #include "qapi/error.h"
>  #include "migration/blocker.h"
> +#include "migration/qemu-file.h"
>  
>  #define TYPE_VFIO_PCI "vfio-pci"
>  #define PCI_VFIO(obj)    OBJECT_CHECK(VFIOPCIDevice, obj, TYPE_VFIO_PCI)
> @@ -1632,6 +1633,50 @@ static void vfio_bars_prepare(VFIOPCIDevice *vdev)
>      }
>  }
>  
> +static int vfio_bar_validate(VFIOPCIDevice *vdev, int nr)
> +{
> +    PCIDevice *pdev = &vdev->pdev;
> +    VFIOBAR *bar = &vdev->bars[nr];
> +    uint64_t addr;
> +    uint32_t addr_lo, addr_hi = 0;
> +
> +    /* Skip unimplemented BARs and the upper half of 64bit BARS. */
> +    if (!bar->size) {
> +        return 0;
> +    }
> +
> +    addr_lo = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + nr * 4, 4);
> +
> +    addr_lo = addr_lo & (bar->ioport ? PCI_BASE_ADDRESS_IO_MASK :
> +                                       PCI_BASE_ADDRESS_MEM_MASK);
> +    if (bar->type == PCI_BASE_ADDRESS_MEM_TYPE_64) {
> +        addr_hi = pci_default_read_config(pdev,
> +                                         PCI_BASE_ADDRESS_0 + (nr + 1) * 4, 
> 4);
> +    }
> +
> +    addr = ((uint64_t)addr_hi << 32) | addr_lo;
> +
> +    if (!QEMU_IS_ALIGNED(addr, bar->size)) {
> +        return -EINVAL;
> +    }
> +
> +    return 0;
> +}
> +
> +static int vfio_bars_validate(VFIOPCIDevice *vdev)
> +{
> +    int i, ret;
> +
> +    for (i = 0; i < PCI_ROM_SLOT; i++) {
> +        ret = vfio_bar_validate(vdev, i);
> +        if (ret) {
> +            error_report("vfio: BAR address %d validation failed", i);
> +            return ret;
> +        }
> +    }
> +    return 0;
> +}
> +
>  static void vfio_bar_register(VFIOPCIDevice *vdev, int nr)
>  {
>      VFIOBAR *bar = &vdev->bars[nr];
> @@ -2414,11 +2459,129 @@ static Object *vfio_pci_get_object(VFIODevice 
> *vbasedev)
>      return OBJECT(vdev);
>  }
>  
> +static void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
> +{
> +    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> +    PCIDevice *pdev = &vdev->pdev;
> +    uint16_t pci_cmd;
> +    int i;
> +
> +    for (i = 0; i < PCI_ROM_SLOT; i++) {
> +        uint32_t bar;
> +
> +        bar = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, 4);
> +        qemu_put_be32(f, bar);
> +    }
> +
> +    qemu_put_be32(f, vdev->interrupt);
> +    if (vdev->interrupt == VFIO_INT_MSI) {
> +        uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
> +        bool msi_64bit;
> +
> +        msi_flags = pci_default_read_config(pdev, pdev->msi_cap + 
> PCI_MSI_FLAGS,
> +                                            2);
> +        msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
> +
> +        msi_addr_lo = pci_default_read_config(pdev,
> +                                         pdev->msi_cap + PCI_MSI_ADDRESS_LO, 
> 4);
> +        qemu_put_be32(f, msi_addr_lo);
> +
> +        if (msi_64bit) {
> +            msi_addr_hi = pci_default_read_config(pdev,
> +                                             pdev->msi_cap + 
> PCI_MSI_ADDRESS_HI,
> +                                             4);
> +        }
> +        qemu_put_be32(f, msi_addr_hi);
> +
> +        msi_data = pci_default_read_config(pdev,
> +                pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 : 
> PCI_MSI_DATA_32),
> +                2);
> +        qemu_put_be32(f, msi_data);
> +    } else if (vdev->interrupt == VFIO_INT_MSIX) {
> +        uint16_t offset;
> +
> +        /* save enable bit and maskall bit */
> +        offset = pci_default_read_config(pdev,
> +                                       pdev->msix_cap + PCI_MSIX_FLAGS + 1, 
> 2);
> +        qemu_put_be16(f, offset);
> +        msix_save(pdev, f);
> +    }
> +    pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
> +    qemu_put_be16(f, pci_cmd);
> +}
> +
> +static int vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f)
> +{
> +    VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> +    PCIDevice *pdev = &vdev->pdev;
> +    uint32_t interrupt_type;
> +    uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
> +    uint16_t pci_cmd;
> +    bool msi_64bit;
> +    int i, ret;
> +
> +    /* retore pci bar configuration */
> +    pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
> +    vfio_pci_write_config(pdev, PCI_COMMAND,
> +                        pci_cmd & (!(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)), 
> 2);
> +    for (i = 0; i < PCI_ROM_SLOT; i++) {
> +        uint32_t bar = qemu_get_be32(f);
> +
> +        vfio_pci_write_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, bar, 4);
> +    }
> +
> +    ret = vfio_bars_validate(vdev);
> +    if (ret) {
> +        return ret;
> +    }
> +
> +    interrupt_type = qemu_get_be32(f);
> +
> +    if (interrupt_type == VFIO_INT_MSI) {
> +        /* restore msi configuration */
> +        msi_flags = pci_default_read_config(pdev,
> +                                            pdev->msi_cap + PCI_MSI_FLAGS, 
> 2);
> +        msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
> +
> +        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
> +                              msi_flags & (!PCI_MSI_FLAGS_ENABLE), 2);
> +
> +        msi_addr_lo = qemu_get_be32(f);
> +        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO,
> +                              msi_addr_lo, 4);
> +
> +        msi_addr_hi = qemu_get_be32(f);
> +        if (msi_64bit) {
> +            vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI,
> +                                  msi_addr_hi, 4);
> +        }
> +        msi_data = qemu_get_be32(f);
> +        vfio_pci_write_config(pdev,
> +                pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 : 
> PCI_MSI_DATA_32),
> +                msi_data, 2);
> +
> +        vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
> +                              msi_flags | PCI_MSI_FLAGS_ENABLE, 2);
> +    } else if (interrupt_type == VFIO_INT_MSIX) {
> +        uint16_t offset = qemu_get_be16(f);
> +
> +        /* load enable bit and maskall bit */
> +        vfio_pci_write_config(pdev, pdev->msix_cap + PCI_MSIX_FLAGS + 1,
> +                              offset, 2);
> +        msix_load(pdev, f);
Hi Kirti, Alex

'msix_load' here may increases the downtime. Our migrate-cap device has 128 msix
interrupts and the guestos enables all of them, so cost a lot of time (nearly
1s) to do 'msix_load', because in 'vfio_msix_vector_do_use' we need disable all
old interuppts and then append a new one.

What's your opinions ?

> +    }
> +    pci_cmd = qemu_get_be16(f);
> +    vfio_pci_write_config(pdev, PCI_COMMAND, pci_cmd, 2);
> +    return 0;
> +}
> +
>  static VFIODeviceOps vfio_pci_ops = {
>      .vfio_compute_needs_reset = vfio_pci_compute_needs_reset,
>      .vfio_hot_reset_multi = vfio_pci_hot_reset_multi,
>      .vfio_eoi = vfio_intx_eoi,
>      .vfio_get_object = vfio_pci_get_object,
> +    .vfio_save_config = vfio_pci_save_config,
> +    .vfio_load_config = vfio_pci_load_config,
>  };
>  
>  int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> index 74261feaeac9..d69a7f3ae31e 100644
> --- a/include/hw/vfio/vfio-common.h
> +++ b/include/hw/vfio/vfio-common.h
> @@ -120,6 +120,8 @@ struct VFIODeviceOps {
>      int (*vfio_hot_reset_multi)(VFIODevice *vdev);
>      void (*vfio_eoi)(VFIODevice *vdev);
>      Object *(*vfio_get_object)(VFIODevice *vdev);
> +    void (*vfio_save_config)(VFIODevice *vdev, QEMUFile *f);
> +    int (*vfio_load_config)(VFIODevice *vdev, QEMUFile *f);
>  };
>  
>  typedef struct VFIOGroup {
> 

-- 
---
Regards,
Longpeng(Mike)