qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[kvm-unit-tests PATCH v4 08/12] arm: pmu: Test SW_INCR event count


From: Eric Auger
Subject: [kvm-unit-tests PATCH v4 08/12] arm: pmu: Test SW_INCR event count
Date: Fri, 3 Apr 2020 09:13:22 +0200

Add tests dedicated to SW_INCR event counting.

Signed-off-by: Eric Auger <address@hidden>

---

v3: new
- Formerly in chained counter tests but as QEMU does not
  support chained counters, the whole test was failing. Peter
  split the test.
---
 arm/pmu.c         | 47 +++++++++++++++++++++++++++++++++++++++++++++++
 arm/unittests.cfg |  6 ++++++
 2 files changed, 53 insertions(+)

diff --git a/arm/pmu.c b/arm/pmu.c
index 45dccf7..c954c71 100644
--- a/arm/pmu.c
+++ b/arm/pmu.c
@@ -140,6 +140,7 @@ static void test_event_introspection(void) {}
 static void test_event_counter_config(void) {}
 static void test_basic_event_count(void) {}
 static void test_mem_access(void) {}
+static void test_sw_incr(void) {}
 
 #elif defined(__aarch64__)
 #define ID_AA64DFR0_PERFMON_SHIFT 8
@@ -464,6 +465,48 @@ static void test_mem_access(void)
                        read_sysreg(pmovsclr_el0));
 }
 
+static void test_sw_incr(void)
+{
+       uint32_t events[] = {SW_INCR, SW_INCR};
+       int i;
+
+       if (!satisfy_prerequisites(events, ARRAY_SIZE(events)))
+               return;
+
+       pmu_reset();
+
+       write_regn_el0(pmevtyper, 0, SW_INCR | PMEVTYPER_EXCLUDE_EL0);
+       write_regn_el0(pmevtyper, 1, SW_INCR | PMEVTYPER_EXCLUDE_EL0);
+       /* enable counters #0 and #1 */
+       write_sysreg_s(0x3, PMCNTENSET_EL0);
+
+       write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+
+       for (i = 0; i < 100; i++)
+               write_sysreg(0x1, pmswinc_el0);
+
+       report_info("SW_INCR counter #0 has value %ld", read_regn_el0(pmevcntr, 
0));
+       report(read_regn_el0(pmevcntr, 0) == PRE_OVERFLOW,
+               "PWSYNC does not increment if PMCR.E is unset");
+
+       pmu_reset();
+
+       write_regn_el0(pmevcntr, 0, PRE_OVERFLOW);
+       write_sysreg_s(0x3, PMCNTENSET_EL0);
+       set_pmcr(pmu.pmcr_ro | PMU_PMCR_E);
+
+       for (i = 0; i < 100; i++)
+               write_sysreg(0x3, pmswinc_el0);
+
+       report(read_regn_el0(pmevcntr, 0)  == 84, "counter #1 after + 100 
SW_INCR");
+       report(read_regn_el0(pmevcntr, 1)  == 100,
+               "counter #0 after + 100 SW_INCR");
+       report_info("counter values after 100 SW_INCR #0=%ld #1=%ld",
+                   read_regn_el0(pmevcntr, 0), read_regn_el0(pmevcntr, 1));
+       report(read_sysreg(pmovsclr_el0) == 0x1,
+               "overflow reg after 100 SW_INCR");
+}
+
 #endif
 
 /*
@@ -650,6 +693,10 @@ int main(int argc, char *argv[])
                report_prefix_push(argv[1]);
                test_mem_access();
                report_prefix_pop();
+       } else if (strcmp(argv[1], "pmu-sw-incr") == 0) {
+               report_prefix_push(argv[1]);
+               test_sw_incr();
+               report_prefix_pop();
        } else {
                report_abort("Unknown sub-test '%s'", argv[1]);
        }
diff --git a/arm/unittests.cfg b/arm/unittests.cfg
index 32ab8c6..175afe6 100644
--- a/arm/unittests.cfg
+++ b/arm/unittests.cfg
@@ -90,6 +90,12 @@ groups = pmu
 arch = arm64
 extra_params = -append 'pmu-mem-access'
 
+[pmu-sw-incr]
+file = pmu.flat
+groups = pmu
+arch = arm64
+extra_params = -append 'pmu-sw-incr'
+
 # Test PMU support (TCG) with -icount IPC=1
 #[pmu-tcg-icount-1]
 #file = pmu.flat
-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]