[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL V2 12/14] net: tulip: check frame size and r/w data length
From: |
Jason Wang |
Subject: |
[PULL V2 12/14] net: tulip: check frame size and r/w data length |
Date: |
Tue, 31 Mar 2020 21:21:37 +0800 |
From: Prasad J Pandit <address@hidden>
Tulip network driver while copying tx/rx buffers does not check
frame size against r/w data length. This may lead to OOB buffer
access. Add check to avoid it.
Limit iterations over descriptors to avoid potential infinite
loop issue in tulip_xmit_list_update.
Reported-by: Li Qiang <address@hidden>
Reported-by: Ziming Zhang <address@hidden>
Reported-by: Jason Wang <address@hidden>
Tested-by: Li Qiang <address@hidden>
Reviewed-by: Li Qiang <address@hidden>
Signed-off-by: Prasad J Pandit <address@hidden>
Signed-off-by: Jason Wang <address@hidden>
---
hw/net/tulip.c | 36 +++++++++++++++++++++++++++---------
1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/hw/net/tulip.c b/hw/net/tulip.c
index cfac271..1295f51 100644
--- a/hw/net/tulip.c
+++ b/hw/net/tulip.c
@@ -170,6 +170,10 @@ static void tulip_copy_rx_bytes(TULIPState *s, struct
tulip_descriptor *desc)
} else {
len = s->rx_frame_len;
}
+
+ if (s->rx_frame_len + len > sizeof(s->rx_frame)) {
+ return;
+ }
pci_dma_write(&s->dev, desc->buf_addr1, s->rx_frame +
(s->rx_frame_size - s->rx_frame_len), len);
s->rx_frame_len -= len;
@@ -181,6 +185,10 @@ static void tulip_copy_rx_bytes(TULIPState *s, struct
tulip_descriptor *desc)
} else {
len = s->rx_frame_len;
}
+
+ if (s->rx_frame_len + len > sizeof(s->rx_frame)) {
+ return;
+ }
pci_dma_write(&s->dev, desc->buf_addr2, s->rx_frame +
(s->rx_frame_size - s->rx_frame_len), len);
s->rx_frame_len -= len;
@@ -227,7 +235,8 @@ static ssize_t tulip_receive(TULIPState *s, const uint8_t
*buf, size_t size)
trace_tulip_receive(buf, size);
- if (size < 14 || size > 2048 || s->rx_frame_len || tulip_rx_stopped(s)) {
+ if (size < 14 || size > sizeof(s->rx_frame) - 4
+ || s->rx_frame_len || tulip_rx_stopped(s)) {
return 0;
}
@@ -275,7 +284,6 @@ static ssize_t tulip_receive_nc(NetClientState *nc,
return tulip_receive(qemu_get_nic_opaque(nc), buf, size);
}
-
static NetClientInfo net_tulip_info = {
.type = NET_CLIENT_DRIVER_NIC,
.size = sizeof(NICState),
@@ -558,7 +566,7 @@ static void tulip_tx(TULIPState *s, struct tulip_descriptor
*desc)
if ((s->csr[6] >> CSR6_OM_SHIFT) & CSR6_OM_MASK) {
/* Internal or external Loopback */
tulip_receive(s, s->tx_frame, s->tx_frame_len);
- } else {
+ } else if (s->tx_frame_len <= sizeof(s->tx_frame)) {
qemu_send_packet(qemu_get_queue(s->nic),
s->tx_frame, s->tx_frame_len);
}
@@ -570,23 +578,31 @@ static void tulip_tx(TULIPState *s, struct
tulip_descriptor *desc)
}
}
-static void tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor *desc)
+static int tulip_copy_tx_buffers(TULIPState *s, struct tulip_descriptor *desc)
{
int len1 = (desc->control >> TDES1_BUF1_SIZE_SHIFT) & TDES1_BUF1_SIZE_MASK;
int len2 = (desc->control >> TDES1_BUF2_SIZE_SHIFT) & TDES1_BUF2_SIZE_MASK;
+ if (s->tx_frame_len + len1 > sizeof(s->tx_frame)) {
+ return -1;
+ }
if (len1) {
pci_dma_read(&s->dev, desc->buf_addr1,
s->tx_frame + s->tx_frame_len, len1);
s->tx_frame_len += len1;
}
+ if (s->tx_frame_len + len2 > sizeof(s->tx_frame)) {
+ return -1;
+ }
if (len2) {
pci_dma_read(&s->dev, desc->buf_addr2,
s->tx_frame + s->tx_frame_len, len2);
s->tx_frame_len += len2;
}
desc->status = (len1 + len2) ? 0 : 0x7fffffff;
+
+ return 0;
}
static void tulip_setup_filter_addr(TULIPState *s, uint8_t *buf, int n)
@@ -651,13 +667,15 @@ static uint32_t tulip_ts(TULIPState *s)
static void tulip_xmit_list_update(TULIPState *s)
{
+#define TULIP_DESC_MAX 128
+ uint8_t i = 0;
struct tulip_descriptor desc;
if (tulip_ts(s) != CSR5_TS_SUSPENDED) {
return;
}
- for (;;) {
+ for (i = 0; i < TULIP_DESC_MAX; i++) {
tulip_desc_read(s, s->current_tx_desc, &desc);
tulip_dump_tx_descriptor(s, &desc);
@@ -675,10 +693,10 @@ static void tulip_xmit_list_update(TULIPState *s)
s->tx_frame_len = 0;
}
- tulip_copy_tx_buffers(s, &desc);
-
- if (desc.control & TDES1_LS) {
- tulip_tx(s, &desc);
+ if (!tulip_copy_tx_buffers(s, &desc)) {
+ if (desc.control & TDES1_LS) {
+ tulip_tx(s, &desc);
+ }
}
}
tulip_desc_write(s, s->current_tx_desc, &desc);
--
2.5.0
- [PULL V2 01/14] hw/net/i82596: Correct command bitmask (CID 1419392), (continued)
- [PULL V2 01/14] hw/net/i82596: Correct command bitmask (CID 1419392), Jason Wang, 2020/03/31
- [PULL V2 02/14] hw/net/i82596.c: Avoid reading off end of buffer in i82596_receive(), Jason Wang, 2020/03/31
- [PULL V2 03/14] Fixed integer overflow in e1000e, Jason Wang, 2020/03/31
- [PULL V2 05/14] hw/net/smc91c111: Let smc91c111_can_receive() return a boolean, Jason Wang, 2020/03/31
- [PULL V2 04/14] hw/net/e1000e_core: Let e1000e_can_receive() return a boolean, Jason Wang, 2020/03/31
- [PULL V2 06/14] hw/net/rtl8139: Simplify if/else statement, Jason Wang, 2020/03/31
- [PULL V2 07/14] hw/net/rtl8139: Update coding style to make checkpatch.pl happy, Jason Wang, 2020/03/31
- [PULL V2 09/14] hw/net/can: Make CanBusClientInfo::can_receive() return a boolean, Jason Wang, 2020/03/31
- [PULL V2 08/14] hw/net: Make NetCanReceive() return a boolean, Jason Wang, 2020/03/31
- [PULL V2 11/14] net/colo-compare.c: Expose "expired_scan_cycle" to users, Jason Wang, 2020/03/31
- [PULL V2 12/14] net: tulip: check frame size and r/w data length,
Jason Wang <=
- [PULL V2 10/14] net/colo-compare.c: Expose "compare_timeout" to users, Jason Wang, 2020/03/31
- [PULL V2 14/14] qtest: add tulip test case, Jason Wang, 2020/03/31
- [PULL V2 13/14] hw/net/allwinner-sun8i-emac.c: Fix REG_ADDR_HIGH/LOW reads, Jason Wang, 2020/03/31
- Re: [PULL V2 00/14] Net patches, Peter Maydell, 2020/03/31