[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 12/26] nvme: add missing mandatory features
|
From: |
Maxim Levitsky |
|
Subject: |
Re: [PATCH v5 12/26] nvme: add missing mandatory features |
|
Date: |
Wed, 25 Mar 2020 12:22:21 +0200 |
On Mon, 2020-03-16 at 00:47 -0700, Klaus Birkelund Jensen wrote:
> On Feb 12 12:27, Maxim Levitsky wrote:
> > On Tue, 2020-02-04 at 10:51 +0100, Klaus Jensen wrote:
> > > Add support for returning a resonable response to Get/Set Features of
> > > mandatory features.
> > >
> > > Signed-off-by: Klaus Jensen <address@hidden>
> > > ---
> > > hw/block/nvme.c | 57 ++++++++++++++++++++++++++++++++++++++++---
> > > hw/block/trace-events | 2 ++
> > > include/block/nvme.h | 3 ++-
> > > 3 files changed, 58 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/hw/block/nvme.c b/hw/block/nvme.c
> > > index a186d95df020..3267ee2de47a 100644
> > > --- a/hw/block/nvme.c
> > > +++ b/hw/block/nvme.c
> > > @@ -1008,7 +1008,15 @@ static uint16_t nvme_get_feature(NvmeCtrl *n,
> > > NvmeCmd *cmd, NvmeRequest *req)
> > > uint32_t dw11 = le32_to_cpu(cmd->cdw11);
> > > uint32_t result;
> > >
> > > + trace_nvme_dev_getfeat(nvme_cid(req), dw10);
> > > +
> > > switch (dw10) {
> > > + case NVME_ARBITRATION:
> > > + result = cpu_to_le32(n->features.arbitration);
> > > + break;
> > > + case NVME_POWER_MANAGEMENT:
> > > + result = cpu_to_le32(n->features.power_mgmt);
> > > + break;
> > > case NVME_TEMPERATURE_THRESHOLD:
> > > result = 0;
> > >
> > > @@ -1029,6 +1037,9 @@ static uint16_t nvme_get_feature(NvmeCtrl *n,
> > > NvmeCmd *cmd, NvmeRequest *req)
> > > break;
> > > }
> > >
> > > + break;
> > > + case NVME_ERROR_RECOVERY:
> > > + result = cpu_to_le32(n->features.err_rec);
> > > break;
> > > case NVME_VOLATILE_WRITE_CACHE:
> > > result = blk_enable_write_cache(n->conf.blk);
> >
> > This is existing code but still like to point out that endianess conversion
> > is missing.
>
> Fixed.
>
> > Also we need to think if we need to do some flush if the write cache is
> > disabled.
> > I don't know yet that area well enough.
> >
>
> Looking at the block layer code it just sets a flag when disabling, but
> subsequent requests will have BDRV_REQ_FUA set. So to make sure that
> stuff in the cache is flushed, let's do a flush.
Good to know!
>
> > > @@ -1041,6 +1052,19 @@ static uint16_t nvme_get_feature(NvmeCtrl *n,
> > > NvmeCmd *cmd, NvmeRequest *req)
> > > break;
> > > case NVME_TIMESTAMP:
> > > return nvme_get_feature_timestamp(n, cmd);
> > > + case NVME_INTERRUPT_COALESCING:
> > > + result = cpu_to_le32(n->features.int_coalescing);
> > > + break;
> > > + case NVME_INTERRUPT_VECTOR_CONF:
> > > + if ((dw11 & 0xffff) > n->params.num_queues) {
> >
> > Looks like it should be >= since interrupt vector is not zero based.
>
> Fixed in other patch.
>
> > > + return NVME_INVALID_FIELD | NVME_DNR;
> > > + }
> > > +
> > > + result = cpu_to_le32(n->features.int_vector_config[dw11 &
> > > 0xffff]);
> > > + break;
> > > + case NVME_WRITE_ATOMICITY:
> > > + result = cpu_to_le32(n->features.write_atomicity);
> > > + break;
> > > case NVME_ASYNCHRONOUS_EVENT_CONF:
> > > result = cpu_to_le32(n->features.async_config);
> > > break;
> > > @@ -1076,6 +1100,8 @@ static uint16_t nvme_set_feature(NvmeCtrl *n,
> > > NvmeCmd *cmd, NvmeRequest *req)
> > > uint32_t dw10 = le32_to_cpu(cmd->cdw10);
> > > uint32_t dw11 = le32_to_cpu(cmd->cdw11);
> > >
> > > + trace_nvme_dev_setfeat(nvme_cid(req), dw10, dw11);
> > > +
> > > switch (dw10) {
> > > case NVME_TEMPERATURE_THRESHOLD:
> > > if (NVME_TEMP_TMPSEL(dw11)) {
> > > @@ -1116,6 +1142,13 @@ static uint16_t nvme_set_feature(NvmeCtrl *n,
> > > NvmeCmd *cmd, NvmeRequest *req)
> > > case NVME_ASYNCHRONOUS_EVENT_CONF:
> > > n->features.async_config = dw11;
> > > break;
> > > + case NVME_ARBITRATION:
> > > + case NVME_POWER_MANAGEMENT:
> > > + case NVME_ERROR_RECOVERY:
> > > + case NVME_INTERRUPT_COALESCING:
> > > + case NVME_INTERRUPT_VECTOR_CONF:
> > > + case NVME_WRITE_ATOMICITY:
> > > + return NVME_FEAT_NOT_CHANGABLE | NVME_DNR;
> > > default:
> > > trace_nvme_dev_err_invalid_setfeat(dw10);
> > > return NVME_INVALID_FIELD | NVME_DNR;
> > > @@ -1689,6 +1722,21 @@ static void nvme_init_state(NvmeCtrl *n)
> > > n->temperature = NVME_TEMPERATURE;
> > > n->features.temp_thresh_hi = NVME_TEMPERATURE_WARNING;
> > > n->starttime_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
> > > +
> > > + /*
> > > + * There is no limit on the number of commands that the controller
> > > may
> > > + * launch at one time from a particular Submission Queue.
> > > + */
> > > + n->features.arbitration = 0x7;
> >
> > A nice #define in nvme.h stating that 0x7 means no burst limit would be
> > nice.
> >
>
> Done.
>
> > > +
> > > + n->features.int_vector_config = g_malloc0_n(n->params.num_queues,
> > > + sizeof(*n->features.int_vector_config));
> > > +
> > > + /* disable coalescing (not supported) */
> > > + for (int i = 0; i < n->params.num_queues; i++) {
> > > + n->features.int_vector_config[i] = i | (1 << 16);
> >
> > Same here
>
> Done.
>
> > > + }
> > > +
> > > n->aer_reqs = g_new0(NvmeRequest *, n->params.aerl + 1);
> > > }
> > >
> > > @@ -1782,15 +1830,17 @@ static void nvme_init_ctrl(NvmeCtrl *n)
> > > id->nn = cpu_to_le32(n->num_namespaces);
> > > id->oncs = cpu_to_le16(NVME_ONCS_WRITE_ZEROS | NVME_ONCS_TIMESTAMP);
> > >
> > > +
> > > + if (blk_enable_write_cache(n->conf.blk)) {
> > > + id->vwc = 1;
> > > + }
> > > +
> > > strcpy((char *) id->subnqn, "nqn.2019-08.org.qemu:");
> > > pstrcat((char *) id->subnqn, sizeof(id->subnqn), n->params.serial);
> > >
> > > id->psd[0].mp = cpu_to_le16(0x9c4);
> > > id->psd[0].enlat = cpu_to_le32(0x10);
> > > id->psd[0].exlat = cpu_to_le32(0x4);
> > > - if (blk_enable_write_cache(n->conf.blk)) {
> > > - id->vwc = 1;
> > > - }
> > >
> > > n->bar.cap = 0;
> > > NVME_CAP_SET_MQES(n->bar.cap, 0x7ff);
> > > @@ -1861,6 +1911,7 @@ static void nvme_exit(PCIDevice *pci_dev)
> > > g_free(n->cq);
> > > g_free(n->sq);
> > > g_free(n->aer_reqs);
> > > + g_free(n->features.int_vector_config);
> > >
> > > if (n->params.cmb_size_mb) {
> > > g_free(n->cmbuf);
> > > diff --git a/hw/block/trace-events b/hw/block/trace-events
> > > index 3952c36774cf..4cf39961989d 100644
> > > --- a/hw/block/trace-events
> > > +++ b/hw/block/trace-events
> > > @@ -41,6 +41,8 @@ nvme_dev_del_cq(uint16_t cqid) "deleted completion
> > > queue, sqid=%"PRIu16""
> > > nvme_dev_identify_ctrl(void) "identify controller"
> > > nvme_dev_identify_ns(uint16_t ns) "identify namespace, nsid=%"PRIu16""
> > > nvme_dev_identify_nslist(uint16_t ns) "identify namespace list,
> > > nsid=%"PRIu16""
> > > +nvme_dev_getfeat(uint16_t cid, uint32_t fid) "cid %"PRIu16" fid
> > > 0x%"PRIx32""
> > > +nvme_dev_setfeat(uint16_t cid, uint32_t fid, uint32_t val) "cid
> > > %"PRIu16" fid 0x%"PRIx32" val 0x%"PRIx32""
> > > nvme_dev_getfeat_vwcache(const char* result) "get feature volatile write
> > > cache, result=%s"
> > > nvme_dev_getfeat_numq(int result) "get feature number of queues,
> > > result=%d"
> > > nvme_dev_setfeat_numq(int reqcq, int reqsq, int gotcq, int gotsq)
> > > "requested cq_count=%d sq_count=%d, responding with cq_count=%d
> > > sq_count=%d"
> > > diff --git a/include/block/nvme.h b/include/block/nvme.h
> > > index a24be047a311..09419ed499d0 100644
> > > --- a/include/block/nvme.h
> > > +++ b/include/block/nvme.h
> > > @@ -445,7 +445,8 @@ enum NvmeStatusCodes {
> > > NVME_FW_REQ_RESET = 0x010b,
> > > NVME_INVALID_QUEUE_DEL = 0x010c,
> > > NVME_FID_NOT_SAVEABLE = 0x010d,
> > > - NVME_FID_NOT_NSID_SPEC = 0x010f,
> > > + NVME_FEAT_NOT_CHANGABLE = 0x010e,
> > > + NVME_FEAT_NOT_NSID_SPEC = 0x010f,
> > > NVME_FW_REQ_SUSYSTEM_RESET = 0x0110,
> > > NVME_CONFLICTING_ATTRS = 0x0180,
> > > NVME_INVALID_PROT_INFO = 0x0181,
> >
> > Best regards,
> > Maxim Levitsky
> >
>
>
Thanks,
Best regards,
Maxim Levitsky