[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 11/11] hw/arm/pxa2xx: Do not wire up OHCI for PXA255
From: |
Peter Maydell |
Subject: |
[PULL 11/11] hw/arm/pxa2xx: Do not wire up OHCI for PXA255 |
Date: |
Tue, 17 Mar 2020 11:40:39 +0000 |
From: Guenter Roeck <address@hidden>
PXA255 does not support a USB OHCI controller, so don't wire it up.
Signed-off-by: Guenter Roeck <address@hidden>
Message-id: address@hidden
Reviewed-by: Peter Maydell <address@hidden>
Signed-off-by: Peter Maydell <address@hidden>
---
hw/arm/pxa2xx.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 56a36202d71..336c9bad4ae 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -2290,9 +2290,6 @@ PXA2xxState *pxa255_init(MemoryRegion *address_space,
unsigned int sdram_size)
s->ssp[i] = (SSIBus *)qdev_get_child_bus(dev, "ssi");
}
- sysbus_create_simple("sysbus-ohci", 0x4c000000,
- qdev_get_gpio_in(s->pic, PXA2XX_PIC_USBH1));
-
s->pcmcia[0] = pxa2xx_pcmcia_init(address_space, 0x20000000);
s->pcmcia[1] = pxa2xx_pcmcia_init(address_space, 0x30000000);
--
2.20.1
- [PULL 00/11] target-arm queue, Peter Maydell, 2020/03/17
- [PULL 02/11] hw/arm/fsl-imx6ul: Fix USB interrupt numbers, Peter Maydell, 2020/03/17
- [PULL 01/11] hw/usb: Add basic i.MX USB Phy support, Peter Maydell, 2020/03/17
- [PULL 03/11] hw/arm/fsl-imx6ul: Instantiate unimplemented pwm and can devices, Peter Maydell, 2020/03/17
- [PULL 04/11] hw/arm/fsl-imx6ul: Wire up USB controllers, Peter Maydell, 2020/03/17
- [PULL 05/11] hw/arm/fsl-imx6: Wire up USB controllers, Peter Maydell, 2020/03/17
- [PULL 06/11] hw/net/imx_fec: write TGSR and TCSR3 in imx_enet_write(), Peter Maydell, 2020/03/17
- [PULL 08/11] m25p80: Improve command handling for Jedec commands, Peter Maydell, 2020/03/17
- [PULL 07/11] m25p80: Convert to support tracing, Peter Maydell, 2020/03/17
- [PULL 09/11] m25p80: Improve command handling for unsupported commands, Peter Maydell, 2020/03/17
- [PULL 11/11] hw/arm/pxa2xx: Do not wire up OHCI for PXA255,
Peter Maydell <=
- [PULL 10/11] aspeed/smc: Fix number of dummy cycles for FAST_READ_4 command, Peter Maydell, 2020/03/17
- Re: [PULL 00/11] target-arm queue, Peter Maydell, 2020/03/17