Re: [PATCH v32 21/22] BootLinuxConsoleTest: Test the RX-Virt machine

[Philippe Mathieu-Daudé]

On 2/24/20 3:19 PM, Yoshinori Sato wrote:
> From: Philippe Mathieu-Daudé <address@hidden>
>
> Add two tests for the rx-virt machine, based on the recommended test
> setup from Yoshinori Sato:
> https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html
>
> - U-Boot prompt
> - Linux kernel with Sash shell
>
> These are very quick tests:
>
>    $ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
>    JOB ID     : 84a6ef01c0b87975ecbfcb31a920afd735753ace
>    JOB LOG    : 
> /home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
>     (1/2) 
> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: PASS 
> (0.11 s)
>     (2/2) 
> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: PASS 
> (0.45 s)
>    RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | 
> CANCEL 0
>
> Tests can also be run with:
>
>    $ avocado --show=console run -t arch:rx 
> tests/acceptance/boot_linux_console.py
>    console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 
> +0900)
>    console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 
> 20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
>    console: Built 1 zonelists, mobility grouping on.  Total pages: 8128
>    ...
>    console: SuperH (H)SCI(F) driver initialized
>    console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is 
> a sci
>    console: console [ttySC0] enabled
>    console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is 
> a sci
>
> Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
> Based-on: address@hidden
> "RX architecture support"
> Signed-off-by: Yoshinori Sato <address@hidden>
> ---
>   tests/acceptance/boot_linux_console.py | 46 ++++++++++++++++++++++++++
>   1 file changed, 46 insertions(+)
>
> diff --git a/tests/acceptance/boot_linux_console.py 
> b/tests/acceptance/boot_linux_console.py
> index 34d37eba3b..367cf480a5 100644
> --- a/tests/acceptance/boot_linux_console.py
> +++ b/tests/acceptance/boot_linux_console.py
> @@ -686,3 +686,49 @@ class BootLinuxConsole(Test):
>           tar_hash = '49e88d9933742f0164b60839886c9739cb7a0d34'
>           self.vm.add_args('-cpu', 'dc233c')
>           self.do_test_advcal_2018('02', tar_hash, 'santas-sleigh-ride.elf')
> +
> +    def test_rx_uboot(self):
> +        """
> +        :avocado: tags=arch:rx
> +        :avocado: tags=machine:rx-virt
> +        :avocado: tags=endian:little
> +        """
> +        uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
> +        uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
> +        uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
> +        uboot_path = archive.uncompress(uboot_path, self.workdir)
> +
> +        self.vm.set_machine('rx-virt')
> +        self.vm.set_console()
> +        self.vm.add_args('-bios', uboot_path,
> +                         '-no-reboot')
> +        self.vm.launch()
> +        uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
> +        self.wait_for_console_pattern(uboot_version)
> +        gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105 
> (experimental)'
> +        # FIXME limit baudrate on chardev, else we type too fast
> +        #self.exec_command_and_wait_for_pattern('version', gcc_version)
> +
> +    def test_rx_linux(self):
> +        """
> +        :avocado: tags=arch:rx
> +        :avocado: tags=machine:rx-virt
> +        :avocado: tags=endian:little
> +        """
> +        dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')

Sourceforge URL are not very stable, I'm now getting:

HTTP request sent, awaiting response... 302 Found
Location: https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb [following]
--2020-03-08 17:17:31--  https://osdn.dl.osdn.net/users/23/23887/rx-qemu.dtb
Resolving osdn.dl.osdn.net (osdn.dl.osdn.net)... 202.221.179.23
Connecting to osdn.dl.osdn.net (osdn.dl.osdn.net)|202.221.179.23|:443... 
connected.
HTTP request sent, awaiting response... 404 Not Found
2020-03-08 17:17:32 ERROR 404: Not Found.

> +        dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
> +        dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
> +        kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
> +        kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
> +        kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
> +
> +        self.vm.set_machine('rx-virt')
> +        self.vm.set_console()
> +        kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
> +        self.vm.add_args('-kernel', kernel_path,
> +                         '-dtb', dtb_path,
> +                         '-no-reboot')
> +        self.vm.launch()
> +        self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
> +        self.exec_command_and_wait_for_pattern('printenv',
> +                                               'TERM=linux')