[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v13 07/10] virtio-iommu-pci: Add virtio iommu pci support
From: |
Auger Eric |
Subject: |
Re: [PATCH v13 07/10] virtio-iommu-pci: Add virtio iommu pci support |
Date: |
Mon, 3 Feb 2020 14:20:55 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.4.0 |
Hi Michael,
On 2/3/20 2:03 PM, Michael S. Tsirkin wrote:
> On Sat, Jan 25, 2020 at 06:19:52PM +0100, Eric Auger wrote:
>> This patch adds virtio-iommu-pci, which is the pci proxy for
>> the virtio-iommu device.
>>
>> Signed-off-by: Eric Auger <address@hidden>
>> Reviewed-by: Jean-Philippe Brucker <address@hidden>
>
> I commented on v11 of this patch:
>>> Could you send a smaller patchset without pci/acpi bits for now?
> And you answered:
>> Yes I am about to send v12.
>
> I guess this patch is here by mistake then?
>
> I think PCI devices should always have config space so guests are
> not tempted to find work-arounds. Right?
No it is not here by mistake. I removed everything related non DT
integration as we discussed.
DT support is fully upstream even for virtio-iommu-pci.
https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/virtio/iommu.txt
So what's wrong implementing that at the moment. As we discussed we
would use the PCIe config space integration for non DT.
If I use the MMIO based device, I am forced to lock an MMIO region for
it in the machvirt memory map:
https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/virtio/mmio.txt
I guess Peter (Maydell) will not be happy with this situation either.
Thanks
Eric
>
>> ---
>>
>> v11 -> v12:
>> - added Jean's R-b
>> - remove the array of intervals. Will be introduced later?
>>
>> v10 -> v11:
>> - add the reserved_regions array property
>>
>> v9 -> v10:
>> - include "hw/qdev-properties.h" header
>>
>> v8 -> v9:
>> - add the msi-bypass property
>> - create virtio-iommu-pci.c
>> ---
>> hw/virtio/Makefile.objs | 1 +
>> hw/virtio/virtio-iommu-pci.c | 88 ++++++++++++++++++++++++++++++++
>> include/hw/pci/pci.h | 1 +
>> include/hw/virtio/virtio-iommu.h | 1 +
>> qdev-monitor.c | 1 +
>> 5 files changed, 92 insertions(+)
>> create mode 100644 hw/virtio/virtio-iommu-pci.c
>>
>> diff --git a/hw/virtio/Makefile.objs b/hw/virtio/Makefile.objs
>> index 2fd9da7410..4e4d39a0a4 100644
>> --- a/hw/virtio/Makefile.objs
>> +++ b/hw/virtio/Makefile.objs
>> @@ -29,6 +29,7 @@ obj-$(CONFIG_VIRTIO_INPUT_HOST) += virtio-input-host-pci.o
>> obj-$(CONFIG_VIRTIO_INPUT) += virtio-input-pci.o
>> obj-$(CONFIG_VIRTIO_RNG) += virtio-rng-pci.o
>> obj-$(CONFIG_VIRTIO_BALLOON) += virtio-balloon-pci.o
>> +obj-$(CONFIG_VIRTIO_IOMMU) += virtio-iommu-pci.o
>> obj-$(CONFIG_VIRTIO_9P) += virtio-9p-pci.o
>> obj-$(CONFIG_VIRTIO_SCSI) += virtio-scsi-pci.o
>> obj-$(CONFIG_VIRTIO_BLK) += virtio-blk-pci.o
>> diff --git a/hw/virtio/virtio-iommu-pci.c b/hw/virtio/virtio-iommu-pci.c
>> new file mode 100644
>> index 0000000000..4cfae1f9df
>> --- /dev/null
>> +++ b/hw/virtio/virtio-iommu-pci.c
>> @@ -0,0 +1,88 @@
>> +/*
>> + * Virtio IOMMU PCI Bindings
>> + *
>> + * Copyright (c) 2019 Red Hat, Inc.
>> + * Written by Eric Auger
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 or
>> + * (at your option) any later version.
>> + */
>> +
>> +#include "qemu/osdep.h"
>> +
>> +#include "virtio-pci.h"
>> +#include "hw/virtio/virtio-iommu.h"
>> +#include "hw/qdev-properties.h"
>> +
>> +typedef struct VirtIOIOMMUPCI VirtIOIOMMUPCI;
>> +
>> +/*
>> + * virtio-iommu-pci: This extends VirtioPCIProxy.
>> + *
>> + */
>> +#define VIRTIO_IOMMU_PCI(obj) \
>> + OBJECT_CHECK(VirtIOIOMMUPCI, (obj), TYPE_VIRTIO_IOMMU_PCI)
>> +
>> +struct VirtIOIOMMUPCI {
>> + VirtIOPCIProxy parent_obj;
>> + VirtIOIOMMU vdev;
>> +};
>> +
>> +static Property virtio_iommu_pci_properties[] = {
>> + DEFINE_PROP_UINT32("class", VirtIOPCIProxy, class_code, 0),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void virtio_iommu_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
>> +{
>> + VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(vpci_dev);
>> + DeviceState *vdev = DEVICE(&dev->vdev);
>> +
>> + qdev_set_parent_bus(vdev, BUS(&vpci_dev->bus));
>> + object_property_set_link(OBJECT(dev),
>> + OBJECT(pci_get_bus(&vpci_dev->pci_dev)),
>> + "primary-bus", errp);
>> + object_property_set_bool(OBJECT(vdev), true, "realized", errp);
>> +}
>> +
>> +static void virtio_iommu_pci_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
>> + PCIDeviceClass *pcidev_k = PCI_DEVICE_CLASS(klass);
>> + k->realize = virtio_iommu_pci_realize;
>> + set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>> + dc->props = virtio_iommu_pci_properties;
>> + pcidev_k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
>> + pcidev_k->device_id = PCI_DEVICE_ID_VIRTIO_IOMMU;
>> + pcidev_k->revision = VIRTIO_PCI_ABI_VERSION;
>> + pcidev_k->class_id = PCI_CLASS_OTHERS;
>> +}
>> +
>> +static void virtio_iommu_pci_instance_init(Object *obj)
>> +{
>> + VirtIOIOMMUPCI *dev = VIRTIO_IOMMU_PCI(obj);
>> +
>> + virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
>> + TYPE_VIRTIO_IOMMU);
>> +}
>> +
>> +static const VirtioPCIDeviceTypeInfo virtio_iommu_pci_info = {
>> + .base_name = TYPE_VIRTIO_IOMMU_PCI,
>> + .generic_name = "virtio-iommu-pci",
>> + .transitional_name = "virtio-iommu-pci-transitional",
>> + .non_transitional_name = "virtio-iommu-pci-non-transitional",
>> + .instance_size = sizeof(VirtIOIOMMUPCI),
>> + .instance_init = virtio_iommu_pci_instance_init,
>> + .class_init = virtio_iommu_pci_class_init,
>> +};
>> +
>> +static void virtio_iommu_pci_register(void)
>> +{
>> + virtio_pci_types_register(&virtio_iommu_pci_info);
>> +}
>> +
>> +type_init(virtio_iommu_pci_register)
>> +
>> +
>> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
>> index 2acd8321af..cfedf5a995 100644
>> --- a/include/hw/pci/pci.h
>> +++ b/include/hw/pci/pci.h
>> @@ -86,6 +86,7 @@ extern bool pci_available;
>> #define PCI_DEVICE_ID_VIRTIO_9P 0x1009
>> #define PCI_DEVICE_ID_VIRTIO_VSOCK 0x1012
>> #define PCI_DEVICE_ID_VIRTIO_PMEM 0x1013
>> +#define PCI_DEVICE_ID_VIRTIO_IOMMU 0x1014
>>
>> #define PCI_VENDOR_ID_REDHAT 0x1b36
>> #define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001
>> diff --git a/include/hw/virtio/virtio-iommu.h
>> b/include/hw/virtio/virtio-iommu.h
>> index 2a2c2ecf83..f39aa0fbb4 100644
>> --- a/include/hw/virtio/virtio-iommu.h
>> +++ b/include/hw/virtio/virtio-iommu.h
>> @@ -25,6 +25,7 @@
>> #include "hw/pci/pci.h"
>>
>> #define TYPE_VIRTIO_IOMMU "virtio-iommu-device"
>> +#define TYPE_VIRTIO_IOMMU_PCI "virtio-iommu-device-base"
>> #define VIRTIO_IOMMU(obj) \
>> OBJECT_CHECK(VirtIOIOMMU, (obj), TYPE_VIRTIO_IOMMU)
>>
>> diff --git a/qdev-monitor.c b/qdev-monitor.c
>> index 3465a1e2d0..97f4022b51 100644
>> --- a/qdev-monitor.c
>> +++ b/qdev-monitor.c
>> @@ -66,6 +66,7 @@ static const QDevAlias qdev_alias_table[] = {
>> { "virtio-input-host-ccw", "virtio-input-host", QEMU_ARCH_S390X },
>> { "virtio-input-host-pci", "virtio-input-host",
>> QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
>> + { "virtio-iommu-pci", "virtio-iommu", QEMU_ARCH_ALL & ~QEMU_ARCH_S390X
>> },
>> { "virtio-keyboard-ccw", "virtio-keyboard", QEMU_ARCH_S390X },
>> { "virtio-keyboard-pci", "virtio-keyboard",
>> QEMU_ARCH_ALL & ~QEMU_ARCH_S390X },
>> --
>> 2.20.1
>
>