[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 0/4] tests/boot_linux_console: Test booting NetBSD via U-Boot
|
From: |
Kamil Rytarowski |
|
Subject: |
Re: [PATCH 0/4] tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi PC |
|
Date: |
Sun, 19 Jan 2020 09:52:47 +0100 |
|
User-agent: |
Mozilla/5.0 (X11; NetBSD amd64; rv:68.0) Gecko/20100101 Thunderbird/68.4.1 |
Thank you for improving testing of the NetBSD target.
On 18.01.2020 20:16, Philippe Mathieu-Daudé wrote:
> This series add a test on the OrangePi PC for:
> - SD Card booting
> - U-boot & UART
> - NetBSD 9
>
> I simply followed Niek description in docs/orangepi.rst:
> https://www.mail-archive.com/address@hidden/msg669347.html
>
> The sdcard image is big, but the test runs very quick (1min),
> even on Travis CI: https://travis-ci.org/philmd/qemu/jobs/638823612#L3778
>
> (11/48)
> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_uboot_netbsd9:
> PASS (65.17 s)
>
> $ TMPDIR=/tmp AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console
> run -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
> JOB ID : 4e11f0d22d121fd766ab5f0956ec464cf9fce64b
> JOB LOG :
> /home/phil/avocado/job-results/job-2020-01-18T19.14-4e11f0d/job.log
> (1/1)
> tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_arm_orangepi_uboot_netbsd9:
> console: U-Boot SPL 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000)
> console: DRAM: 1024 MiB
> console: Failed to set core voltage! Can't set CPU frequency
> console: Trying to boot from MMC1
> console: U-Boot 2020.01+dfsg-1 (Jan 08 2020 - 08:19:44 +0000) Allwinner
> Technology
> console: CPU: Allwinner H3 (SUN8I 0000)
> console: Model: Xunlong Orange Pi Plus / Plus 2
> console: DRAM: 1 GiB
> console: MMC: Device 'mmc@1c11000': seq 1 is in use by 'mmc@1c10000'
> console: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1
> console: Loading Environment from FAT... Warning: HDMI PHY init timeout!
> console: Warning: HDMI PHY init timeout!
> console: In: serial
> console: Out: serial
> console: Err: serial
> console: Net: phy interface7
> console: Could not get PHY for ethernet@1c30000: addr 0
> console: No ethernet found.
> console: starting USB...
> console: Bus usb@1c1b000: USB EHCI 1.00
> console: Bus usb@1c1d000: USB EHCI 1.00
> console: scanning bus usb@1c1b000 for devices... 1 USB Device(s) found
> console: scanning bus usb@1c1d000 for devices... 1 USB Device(s) found
> console: scanning usb for storage devices... 0 Storage Device(s) found
> console: Hit any key to stop autoboot: 0
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: =>
> console: => setenv bootargs root=ld0a
> console: => setenv kernel netbsd-GENERIC.ub
> console: => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb
> console: => setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel};
> fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}; fdt addr ${fdt_addr_r}; bootm
> ${kernel_addr_r} - ${fdt_addr_r}'
> console: => boot
> console: 8850008 bytes read in 2583 ms (3.3 MiB/s)
> console: 28162 bytes read in 34 ms (808.6 KiB/s)
> console: ## Booting kernel from Legacy Image at 42000000 ...
> console: Image Name: NetBSD/earmv7hf 9.0_RC1
> console: Image Type: ARM Linux Kernel Image (no loading done)
> (uncompressed)
> console: Data Size: 8849944 Bytes = 8.4 MiB
> console: Load Address: 00000000
> console: Entry Point: 00000000
> console: Verifying Checksum ... OK
> console: ## Flattened Device Tree blob at 43000000
> console: Booting using the fdt blob at 0x43000000
> console: XIP Kernel Image (no loading done)
> console: Loading Device Tree to 49ff6000, end 49fffe01 ... OK
> console: Starting kernel ...
> console: [ 1.0000000] NetBSD/evbarm (fdt) booting ...
> console: [ 1.0000000] [ Kernel symbol table missing! ]
> console: [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
> 2002, 2003, 2004, 2005,
> console: [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
> 2014, 2015, 2016, 2017,
> console: [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All
> rights reserved.
> console: [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
> console: [ 1.0000000] The Regents of the University of California.
> All rights reserved.
> console: [ 1.0000000] NetBSD 9.0_RC1 (GENERIC) #0: Wed Nov 27 16:14:52
> UTC 2019
> console: [ 1.0000000]
> address@hidden:/usr/src/sys/arch/evbarm/compile/GENERIC
> console: [ 1.0000000] total memory = 1024 MB
> console: [ 1.0000000] avail memory = 1003 MB
> console: [ 1.0000000] armfdt0 (root)
> console: [ 1.0000000] simplebus0 at armfdt0: Xunlong Orange Pi PC
> console: [ 1.0000000] simplebus1 at simplebus0
> console: [ 1.0000000] simplebus2 at simplebus0
> console: [ 1.0000000] cpus0 at simplebus0
> console: [ 1.0000000] simplebus3 at simplebus0
> console: [ 1.0000000] cpu0 at cpus0: Cortex-A7 r0p5 (Cortex V7A core)
> console: [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch
> prediction enabled
> console: [ 1.0000000] cpu0: 32KB/64B 2-way L1 VIPT Instruction cache
> console: [ 1.0000000] cpu0: 32KB/64B 2-way write-back-locking-C L1 PIPT
> Data cache
> console: [ 1.0000000] cpu0: 2304KB/64B 16-way write-through L2 PIPT
> Unified cache
> console: [ 1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN
> propagation, denormals
> console: [ 1.0000000] cpufreqdt0 at cpu0
> console: [ 1.0000000] cpu1 at cpus0
> console: [ 1.0000000] cpufreqdt1 at cpu1
> console: [ 1.0000000] cpu2 at cpus0
> console: [ 1.0000000] cpufreqdt2 at cpu2
> console: [ 1.0000000] cpu3 at cpus0
> console: [ 1.0000000] cpufreqdt3 at cpu3
> console: [ 1.0000000] gic0 at simplebus1: GIC
> console: [ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 160
> sources (160 valid)
> console: [ 1.0000000] armgic0: 256 Priorities, 128 SPIs, 16 PPIs, 16 SGIs
> console: [ 1.0000000] fclock0 at simplebus2: 24000000 Hz fixed clock
> (osc24M)
> console: [ 1.0000000] fclock1 at simplebus2: 32768 Hz fixed clock
> (ext_osc32k)
> console: [ 1.0000000] gtmr0 at simplebus0: Generic Timer
> console: [ 1.0000000] gtmr0: interrupting on GIC irq 27
> console: [ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz,
> virtual)
> console: [ 1.0000060] sun8ih3ccu0 at simplebus1: H3 CCU
> console: [ 1.0000060] sun8ih3rccu0 at simplebus1: H3 PRCM CCU
> console: [ 1.0000060] sunxigpio0 at simplebus1: PIO
> console: [ 1.0000060] gpio0 at sunxigpio0: 94 pins
> console: [ 1.0000060] sunxigpio0: interrupting on GIC irq 43
> console: [ 1.0000060] sunxigpio1 at simplebus1: PIO
> console: [ 1.0000060] gpio1 at sunxigpio1: 12 pins
> console: [ 1.0000060] sunxigpio1: interrupting on GIC irq 77
> console: [ 1.0000060] sunxisramc0 at simplebus1: SRAM Controller
> console: [ 1.0000060] sun6idma0 at simplebus1: DMA controller (12
> channels)
> console: [ 1.0000060] sun6idma0: interrupting on GIC irq 82
> console: [ 1.0000060] connector0 at simplebus0: HDMI connector
> console: [ 1.0000060] com0 at simplebus1: ns16550a, working fifo
> console: [ 1.0000060] com0: console
> console: [ 1.0000060] com0: interrupting on GIC irq 32
> console: [ 1.0000060] fregulator0 at simplebus0: vcc3v3
> console: [ 1.0000060] fregulator1 at simplebus0: usb0-vbus
> console: [ 1.0000060] fregulator2 at simplebus0: vcc3v0
> console: [ 1.0000060] fregulator3 at simplebus0: vcc5v0
> console: [ 1.0000060] sunxiusbphy0 at simplebus1: USB PHY
> console: [ 1.0000060] /soc/clock@1000000 at simplebus1 not configured
> console: [ 1.0000060] /soc/mixer@1100000 at simplebus1 not configured
> console: [ 1.0000060] /soc/lcd-controller@1c0c000 at simplebus1 not
> configured
> console: [ 1.0000060] /soc/hdmi@1ee0000 at simplebus1 not configured
> console: [ 1.0000060] sunxirtc0 at simplebus1: RTC
> console: [ 1.0000060] emac0 at simplebus1: EMAC
> console: [ 1.0000060] emac0: Ethernet address 52:54:00:12:34:56
> console: [ 1.0000060] emac0: interrupting on GIC irq 114
> console: [ 1.0000060] ukphy0 at emac0 phy 1: OUI 0x0088a0, model 0x0000,
> rev. 0
> console: [ 1.0000060] ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
> 100baseTX-FDX, 100baseT4, auto
> console: [ 1.0000060] h3codec0 at simplebus1: H3 Audio Codec (analog part)
> console: [ 1.0000060] /soc/hdmi-phy@1ef0000 at simplebus1 not configured
> console: [ 1.0000060] /opp_table0 at simplebus0 not configured
> console: [ 1.0000060] sunxitwi0 at simplebus1: Marvell TWSI controller
> console: [ 1.0000060] sunxitwi0: interrupting on GIC irq 76
> console: [ 1.0000060] iic0 at sunxitwi0: I2C bus
> console: [ 1.0000060] sy8106a0 at iic0 addr 0x65: Silergy SY8106A
> regulator
> console: [ 1.0000060] /display-engine at simplebus0 not configured
> console: [ 1.0000060] sunximmc0 at simplebus1: SD/MMC controller
> console: [ 1.0000060] sunximmc0: interrupting on GIC irq 92
> console: [ 1.0000060] motg0 at simplebus1: 'otg' mode not supported
> console: [ 1.0000060] ehci0 at simplebus1: EHCI
> console: [ 1.0000060] ehci0: interrupting on GIC irq 104
> console: ehci0: ohci or uhci probably not configured
> console: [ 1.0000060] usb0 at ehci0: USB revision 2.0
> console: [ 1.0000060] ohci0 at simplebus1: OHCI
> console: [ 1.0000060] ohci0: interrupting on GIC irq 105
> console: [ 1.0000060] ohci0: OHCI version 1.0
> console: [ 1.0000060] usb1 at ohci0: USB revision 1.0
> console: [ 1.0000060] ehci1 at simplebus1: EHCI
> console: [ 1.0000060] ehci1: interrupting on GIC irq 106
> console: ehci1: ohci or uhci probably not configured
> console: [ 1.0000060] usb2 at ehci1: USB revision 2.0
> console: [ 1.0000060] ohci1 at simplebus1: OHCI
> console: [ 1.0000060] ohci1: interrupting on GIC irq 107
> console: [ 1.0000060] ohci1: OHCI version 1.0
> -console: [ 1.0000060] usb3 at ohci1: USB revision 1.0
> console: [ 1.0000060] ehci2 at simplebus1: EHCI
> console: [ 1.0000060] ehci2: interrupting on GIC irq 108
> console: ehci2: ohci or uhci probably not configured
> console: [ 1.0000060] usb4 at ehci2: USB revision 2.0
> console: [ 1.0000060] ohci2 at simplebus1: OHCI
> console: [ 1.0000060] ohci2: interrupting on GIC irq 109
> console: [ 1.0000060] ohci2: OHCI version 1.0
> console: [ 1.0000060] usb5 at ohci2: USB revision 1.0
> console: [ 1.0000060] ehci3 at simplebus1: EHCI
> console: [ 1.0000060] ehci3: interrupting on GIC irq 110
> console: ehci3: ohci or uhci probably not configured
> console: [ 1.0000060] usb6 at ehci3: USB revision 2.0
> console: [ 1.0000060] ohci3 at simplebus1: OHCI
> console: [ 1.0000060] ohci3: interrupting on GIC irq 111
> console: [ 1.0000060] ohci3: OHCI version 1.0
> console: [ 1.0000060] usb7 at ohci3: USB revision 1.0
> console: [ 1.0000060] sunxiwdt0 at simplebus1: Watchdog
> console: [ 1.0000060] sunxiwdt0: default watchdog period is 16 seconds
> console: [ 1.0000060] sunxicodec0 at simplebus1: H3 Audio Codec
> console: [ 1.0000060] audio0 at sunxicodec0: playback, capture, full
> duplex, independent
> console: [ 1.0000060] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for
> playback
> console: [ 1.0000060] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for
> recording
> console: [ 1.0000060] spkr0 at audio0: PC Speaker (synthesized)
> console: [ 1.0000060] wsbell at spkr0 not configured
> console: [ 1.0000060] /soc/ir@1f02000 at simplebus1 not configured
> console: [ 1.0000060] /soc/gpu@1c40000 at simplebus1 not configured
> console: [ 1.0000060] psci0 at simplebus0: PSCI 0.1
> console: [ 1.0000060] gpioleds0 at simplebus0: orangepi:green:pwr
> orangepi:red:status
> console: [ 1.0000060] gpiokeys0 at simplebus0: sw4
> console: [ 1.0000060] sunxitimer0 at simplebus1: Timer
> console: [ 1.0000060] /soc/video-codec@1c0e000 at simplebus1 not
> configured
> console: [ 1.0000060] cpu3: Cortex-A7 r0p5 (Cortex V7A core)
> console: [ 1.0000060] cpu3: DC enabled IC enabled WB enabled LABT branch
> prediction enabled
> console: [ 1.0000060] cpu3: 32KB/64B 2-way L1 VIPT Instruction cache
> console: [ 1.0000060] cpu3: 32KB/64B 2-way write-back-locking-C L1 PIPT
> Data cache
> console: [ 1.0160154] cpu3: 2304KB/64B 16-way write-through L2 PIPT
> Unified cache
> console: [ 1.0234452] vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN
> propagation, denormals
> console: [ 1.0291986] cpu1: Cortex-A7 r0p5 (Cortex V7A core)
> console: [ 1.0291986] cpu1: DC enabled IC enabled WB enabled LABT branch
> prediction enabled
> console: [ 1.0291986] cpu1: 32KB/64B 2-way L1 VIPT Instruction cache
> console: [ 1.0394135] cpu1: 32KB/64B 2-way write-back-locking-C L1 PIPT
> Data cache
> console: [ 1.0394135] cpu1: 2304KB/64B 16-way write-through L2 PIPT
> Unified cache
> console: [ 1.0394135] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN
> propagation, denormals
> console: [ 1.0493315] cpu2: Cortex-A7 r0p5 (Cortex V7A core)
> console: [ 1.0634020] cpu2: DC enabled IC enabled WB enabled LABT branch
> prediction enabled
> console: [ 1.0694913] cpu2: 32KB/64B 2-way L1 VIPT Instruction cache
> console: [ 1.0694913] cpu2: 32KB/64B 2-way write-back-locking-C L1 PIPT
> Data cache
> console: [ 1.0806243] cpu2: 2304KB/64B 16-way write-through L2 PIPT
> Unified cache
> console: [ 1.0896281] vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN
> propagation, denormals
> console: [ 1.6053940] sdmmc0 at sunximmc0
> console: [ 1.9566931] uhub0 at usb0: NetBSD (0000) EHCI root hub (0000),
> class 9/0, rev 2.00/1.00, addr 1
> console: [ 2.0663940] uhub1 at usb2: NetBSD (0000) EHCI root hub (0000),
> class 9/0, rev 2.00/1.00, addr 1
> console: [ 2.1170633] uhub2 at usb1: NetBSD (0000) OHCI root hub (0000),
> class 9/0, rev 1.00/1.00, addr 1
> console: [ 2.2277627] uhub3 at usb4: NetBSD (0000) EHCI root hub (0000),
> class 9/0, rev 2.00/1.00, addr 1
> console: [ 2.2800297] uhub4 at usb3: NetBSD (0000) OHCI root hub (0000),
> class 9/0, rev 1.00/1.00, addr 1
> console: [ 2.3289886] uhub5 at usb6: NetBSD (0000) EHCI root hub (0000),
> class 9/0, rev 2.00/1.00, addr 1
> console: [ 2.4083724] uhub6 at usb7: NetBSD (0000) OHCI root hub (0000),
> class 9/0, rev 1.00/1.00, addr 1
> console: [ 2.4895047] uhub7 at usb5: NetBSD (0000) OHCI root hub (0000),
> class 9/0, rev 1.00/1.00, addr 1
> console: [ 2.8171937] sdmmc0: SD card status: 4-bit, C0
> console: [ 2.8234040] ld0 at sdmmc0:
> <0xaa:0x5859:QEMU!:0x01:0xdeadbeef:0x062>
> console: [ 2.8743967] ld0: 1290 MB, 655 cyl, 64 head, 63 sec, 512
> bytes/sect x 2642944 sectors
> console: [ 3.1588850] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
> console: [ 4.9942260] WARNING: 4 errors while detecting hardware; check
> system log.
> console: [ 5.0142912] boot device: ld0
> console: [ 5.0551260] root on ld0a dumps on ld0b
> console: [ 5.2175484] root file system type: ffs
> console: [ 5.2858559] kern.module.path=/stand/evbarm/9.0/modules
> console: Tue Jan 18 18:15:15 UTC 2050
> console: Starting root file system check:
> PASS (35.96 s)
> RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 |
> CANCEL 0
> JOB TIME : 36.09 s
>
> Based-on: <address@hidden>
> "Add Allwinner H3 SoC and Orange Pi PC Machine" v3
> https://www.mail-archive.com/address@hidden/msg669328.html
>
> Philippe Mathieu-Daudé (4):
> Acceptance tests: Extract _console_interaction()
> Acceptance tests: Add interrupt_interactive_console_until_pattern()
> tests/boot_linux_console: Test booting NetBSD via U-Boot on OrangePi
> PC
> .travis.yml: Allow untrusted code and large files
>
> .travis.yml | 2 +
> tests/acceptance/avocado_qemu/__init__.py | 59 ++++++++++++++++-----
> tests/acceptance/boot_linux_console.py | 63 +++++++++++++++++++++++
> 3 files changed, 110 insertions(+), 14 deletions(-)
>
signature.asc
Description: OpenPGP digital signature