[PATCH v4 15/20] tests/boot_linux_console: Add a SD card test for the OrangePi PC board

[Niek Linnenbank]

From: Philippe Mathieu-Daudé <address@hidden>

The kernel image and DeviceTree blob are built by the Armbian
project (based on Debian):
https://www.armbian.com/orange-pi-pc/

The SD image is from the kernelci.org project:
https://kernelci.org/faq/#the-code

If ARM is a target being built, "make check-acceptance" will
automatically include this test by the use of the "arch:arm" tags.

Alternatively, this test can be run using:

  $ avocado --show=console run -t machine:orangepi-pc 
tests/acceptance/boot_linux_console.py
  console: Uncompressing Linux... done, booting the kernel.
  console: Booting Linux on physical CPU 0x0
  console: Linux version 4.20.7-sunxi (address@hidden) (gcc version 7.2.1 
20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP Fri Feb 8 09:02:10 CET 2019
  console: CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d
  [...]
  console: sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, 
nowayout=0)
  console: sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.2
  console: sunxi-mmc 1c0f000.mmc: Got CD GPIO
  console: ledtrig-cpu: registered to indicate activity on CPUs
  console: hidraw: raw HID events driver (C) Jiri Kosina
  console: usbcore: registered new interface driver usbhid
  console: usbhid: USB HID core driver
  console: Initializing XFRM netlink socket
  console: sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
  console: NET: Registered protocol family 10
  console: mmc0: host does not support reading read-only switch, assuming 
write-enable
  console: mmc0: Problem switching card into high-speed mode!
  console: mmc0: new SD card at address 4567
  console: mmcblk0: mmc0:4567 QEMU! 60.0 MiB
  [...]
  console: EXT4-fs (mmcblk0): mounting ext2 file system using the ext4 subsystem
  console: EXT4-fs (mmcblk0): mounted filesystem without journal. Opts: (null)
  console: VFS: Mounted root (ext2 filesystem) on device 179:0.
  console: Run /sbin/init as init process
  console: EXT4-fs (mmcblk0): re-mounted. Opts: 
block_validity,barrier,user_xattr,acl
  console: Starting syslogd: OK
  console: Starting klogd: OK
  console: Populating /dev using udev: udevd[203]: starting version 3.2.7
  console: /bin/sh: can't access tty; job control turned off
  console: cat /proc/partitions
  console: / # cat /proc/partitions
  console: major minor  #blocks  name
  console: 1        0       4096 ram0
  console: 1        1       4096 ram1
  console: 1        2       4096 ram2
  console: 1        3       4096 ram3
  console: 179        0      61440 mmcblk0
  console: reboot
  console: / # reboot
  console: umount: devtmpfs busy - remounted read-only
  console: EXT4-fs (mmcblk0): re-mounted. Opts: (null)
  console: The system is going down NOW!
  console: Sent SIGTERM to all processes
  console: Sent SIGKILL to all processes
  console: Requesting system reboot
  console: reboot: Restarting system
  JOB TIME   : 68.64 s

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
[NL: rename in commit message Raspbian to Armbian, remove vm.set_machine()]
Signed-off-by: Niek Linnenbank <address@hidden>
---
 tests/acceptance/boot_linux_console.py | 41 ++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/tests/acceptance/boot_linux_console.py 
b/tests/acceptance/boot_linux_console.py
index 463aa65f4d..50294e1675 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -550,6 +550,47 @@ class BootLinuxConsole(Test):
         exec_command_and_wait_for_pattern(self, 'reboot',
                                                 'reboot: Restarting system')
 
+    def test_arm_orangepi_sd(self):
+        """
+        :avocado: tags=arch:arm
+        :avocado: tags=machine:orangepi-pc
+        """
+        deb_url = ('https://apt.armbian.com/pool/main/l/'
+                   'linux-4.20.7-sunxi/linux-image-dev-sunxi_5.75_armhf.deb')
+        deb_hash = '1334c29c44d984ffa05ed10de8c3361f33d78315'
+        deb_path = self.fetch_asset(deb_url, asset_hash=deb_hash)
+        kernel_path = self.extract_from_deb(deb_path,
+                                            '/boot/vmlinuz-4.20.7-sunxi')
+        dtb_path = '/usr/lib/linux-image-dev-sunxi/sun8i-h3-orangepi-pc.dtb'
+        dtb_path = self.extract_from_deb(deb_path, dtb_path)
+        rootfs_url = ('http://storage.kernelci.org/images/rootfs/buildroot/'
+                      'kci-2019.02/armel/base/rootfs.ext2.xz')
+        rootfs_hash = '692510cb625efda31640d1de0a8d60e26040f061'
+        rootfs_path_xz = self.fetch_asset(rootfs_url, asset_hash=rootfs_hash)
+        rootfs_path = os.path.join(self.workdir, 'rootfs.cpio')
+        archive.lzma_uncompress(rootfs_path_xz, rootfs_path)
+
+        self.vm.set_console()
+        kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE +
+                               'console=ttyS0,115200 '
+                               'root=/dev/mmcblk0 rootwait rw '
+                               'panic=-1 noreboot')
+        self.vm.add_args('-kernel', kernel_path,
+                         '-dtb', dtb_path,
+                         '-drive', 'file=' + rootfs_path + ',if=sd,format=raw',
+                         '-append', kernel_command_line,
+                         '-no-reboot')
+        self.vm.launch()
+        shell_ready = "/bin/sh: can't access tty; job control turned off"
+        self.wait_for_console_pattern(shell_ready)
+
+        exec_command_and_wait_for_pattern(self, 'cat /proc/cpuinfo',
+                                                'Allwinner sun8i Family')
+        exec_command_and_wait_for_pattern(self, 'cat /proc/partitions',
+                                                'mmcblk0')
+        exec_command_and_wait_for_pattern(self, 'reboot',
+                                                'reboot: Restarting system')
+
     def test_s390x_s390_ccw_virtio(self):
         """
         :avocado: tags=arch:s390x
-- 
2.17.1