[PATCH v2 4/7] hw/char/exynos4210_uart: Implement post_load function

[Guenter Roeck]

After restoring a VM, serial parameters need to be updated to reflect
restored register values. Implement a post_load function to handle this
situation.

Signed-off-by: Guenter Roeck <address@hidden>
---
v4: Additional patch to implement post-load functionality
    in exynos uart driver. Required for next patch in series.

 hw/char/exynos4210_uart.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c
index fb7a3ebd09..5d48701b6d 100644
--- a/hw/char/exynos4210_uart.c
+++ b/hw/char/exynos4210_uart.c
@@ -522,10 +522,20 @@ static void exynos4210_uart_reset(DeviceState *dev)
     trace_exynos_uart_rxsize(s->channel, s->rx.size);
 }
 
+static int exynos4210_uart_post_load(void *opaque, int version_id)
+{
+    Exynos4210UartState *s = (Exynos4210UartState *)opaque;
+
+    exynos4210_uart_update_parameters(s);
+
+    return 0;
+}
+
 static const VMStateDescription vmstate_exynos4210_uart_fifo = {
     .name = "exynos4210.uart.fifo",
     .version_id = 1,
     .minimum_version_id = 1,
+    .post_load = exynos4210_uart_post_load,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(sp, Exynos4210UartFIFO),
         VMSTATE_UINT32(rp, Exynos4210UartFIFO),
-- 
2.17.1