[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v3 17/17] docs: add Orange Pi PC document

From: Philippe Mathieu-Daudé
Subject: Re: [PATCH v3 17/17] docs: add Orange Pi PC document
Date: Sat, 18 Jan 2020 10:37:51 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.2.2

On 1/8/20 9:00 PM, Niek Linnenbank wrote:
The Xunlong Orange Pi PC machine is a functional ARM machine
based on the Allwinner H3 System-on-Chip. It supports mainline
Linux, U-Boot, NetBSD and is covered by acceptance tests.

This commit adds a documentation text file with a description
of the machine and instructions for the user.

Signed-off-by: Niek Linnenbank <address@hidden>
  docs/orangepi.rst | 200 ++++++++++++++++++++++++++++++++++++++++++++++
  MAINTAINERS       |   1 +
  2 files changed, 201 insertions(+)
  create mode 100644 docs/orangepi.rst

diff --git a/docs/orangepi.rst b/docs/orangepi.rst
new file mode 100644
index 0000000000..5ac2a7b7cc
--- /dev/null
+++ b/docs/orangepi.rst
@@ -0,0 +1,200 @@
+Orange Pi PC Machine Type
+The Xunlong Orange Pi PC is an Allwinner H3 System on Chip
+based embedded computer with mainline support in both U-Boot
+and Linux. The board comes with a Quad Core Cortex A7 @ 1.3GHz,
+512MB RAM, 100Mbit ethernet, USB, SD/MMC, USB, HDMI and
+various other I/O.
+Supported devices
+The Orange Pi PC machine type supports the following devices:

Maybe drop "type"?

+ * SMP (Quad Core Cortex A7)
+ * Generic Interrupt Controller configuration
+ * SRAM mappings
+ * SDRAM controller
+ * Real Time Clock
+ * Timer device (re-used from Allwinner A10)
+ * UART
+ * SD/MMC storage controller
+ * EMAC ethernet connectivity

Drop "connectivity"?

+ * USB 2.0 interfaces
+ * Clock Control Unit
+ * System Control module
+ * Security Identifier device
+Currently, Orange Pi PC does *not* support the following features:
+- Graphical output via HDMI, GPU and/or the Display Engine
+- Audio output
+- Hardware Watchdog
+Also see the 'unimplemented' array in the Allwinner H3 SoC module
+for a complete list of unimplemented I/O devices:
+  ./hw/arm/allwinner-h3.c
+Using the Orange Pi PC machine type
+Boot options
+The Orange Pi PC machine can start using the standard -kernel functionality
+for loading a Linux kernel or ELF executable. Additionally, the Orange Pi PC
+machine can also emulate the BootROM which is present on an actual Allwinner H3
+based SoC, which loads the bootloader from SD card, specified via the -sd 

"from a SD card"?

+to qemu-system-arm.
+Running mainline Linux
+Recently released mainline Linux kernels from 4.19 up to latest master

Drop "Recently released mainline" or only use "Mainline"?

+are known to work. To build a Linux mainline kernel that can be booted
+by the Orange Pi PC machine, simply configure the kernel using the
+sunxi_defconfig configuration:
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make mrproper
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make sunxi_defconfig
+To be able to use USB storage, you need to manually enable the corresponding
+configuration item. Start the kconfig configuration tool:
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make menuconfig
+Navigate to the following item, enable it and save your configuration:
+  Device Drivers > USB support > USB Mass Storage support

Isn't it simpler to run 'echo CONFIG_USB_STORAGE=y >> .config && make oldconfig'?

+Build the Linux kernel with:
+  $ ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- make -j5

I'm not sure about recommending "-j5" in the doc, not all user have >=4 SMP system. Maybe we don't care.

+To boot the newly build linux kernel in QEMU with the Orange Pi PC machine, 
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+      -kernel /path/to/linux/arch/arm/boot/zImage \
+      -append 'console=ttyS0,115200' \
+      -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb
+Orange Pi PC images
+Note that the mainline kernel does not have a root filesystem. You may provide 
+with an official Orange Pi PC image from the official website:
+  http://www.orangepi.org/downloadresources/
+Another possibility is to run an Armbian image for Orange Pi PC which
+can be downloaded from:
+   https://www.armbian.com/orange-pi-pc/
+Alternatively, you can also choose to build you own image with buildroot
+using the orangepi_pc_defconfig. Also see https://buildroot.org for more 
+You can choose to attach the selected image either as an SD card or as USB 
mass storage.
+For example, to boot using the Orange Pi PC Debian image on SD card, simply 
add the -sd
+argument and provide the proper root= kernel parameter:
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+      -kernel /path/to/linux/arch/arm/boot/zImage \
+      -append 'console=ttyS0,115200 root=/dev/mmcblk0p2' \
+      -dtb /path/to/linux/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb \
+      -sd OrangePi_pc_debian_stretch_server_linux5.3.5_v1.0.img
+To attach the image as an USB mass storage device to the machine,
+simply append to the command:
+  -drive if=none,id=stick,file=myimage.img \
+  -device usb-storage,bus=usb-bus.0,drive=stick
+Instead of providing a custom Linux kernel via the -kernel command you may also
+choose to let the Orange Pi PC machine load the bootloader from SD card, just 
+a real board would do using the BootROM. Simply pass the selected image via 
the -sd
+argument and remove the -kernel, -append, -dbt and -initrd arguments:
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+       -sd Armbian_19.11.3_Orangepipc_buster_current_5.3.9.img
+Note that both the official Orange Pi PC images and Armbian images start
+a lot of userland programs via systemd. Depending on the host hardware and OS,
+they may be slow to emulate, especially due to emulating the 4 cores.
+To help reduce the performance slow down due to emulating the 4 cores, you can
+give the following kernel parameters (or via -append):
+  => setenv extraargs 'systemd.default_timeout_start_sec=9000 loglevel=7 nosmp 
+Running U-Boot
+U-Boot mainline can be build and configured using the orangepi_pc_defconfig
+using similar commands as describe above for Linux. Note that it is recommended
+for development/testing to select the following configuration setting in 
+  Device Tree Control > Provider for DTB for DT Control > Embedded DTB
+To start U-Boot using the Orange Pi PC machine, provide the
+u-boot binary to the -kernel argument:
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+      -kernel /path/to/uboot/u-boot -sd disk.img
+Use the following U-boot commands to load and boot a Linux kernel from SD card:
+  -> setenv bootargs console=ttyS0,115200
+  -> ext2load mmc 0 0x42000000 zImage
+  -> ext2load mmc 0 0x43000000 sun8i-h3-orangepi-pc.dtb
+  -> bootz 0x42000000 - 0x43000000
+Running NetBSD
+The NetBSD operating system also includes support for Allwinner H3 based 
+including the Orange Pi PC. NetBSD 9.0 is known to work best for the Orange Pi 
+board and provides a fully working system with serial console, networking and 
+Currently NetBSD 9.0 is in testing, but release candidate 1 can be started
+successfully on the Orange Pi PC machine. Get the 'evbarm-earmv7hf' based 
image from:
+The image requires manually installing U-Boot in the image. Build U-Boot with
+the orangepi_pc_defconfig configuration as described in the previous section.
+Next, unzip the NetBSD image and write the U-Boot binary including SPL using:
+  $ gunzip armv7.img.gz
+  $ dd if=/path/to/u-boot-sunxi-with-spl.bin of=armv7.img bs=1024 seek=8 
+Start the machine using the following command:
+  $ qemu-system-arm -M orangepi-pc -nic user -nographic \
+        -sd armv7.img
+At the U-Boot stage, interrupt the automatic boot process by pressing a key
+and set the following environment variables before booting:
+  => setenv bootargs root=ld0a
+  => setenv kernel netbsd-GENERIC.ub
+  => setenv fdtfile dtb/sun8i-h3-orangepi-pc.dtb
+  => setenv bootcmd 'fatload mmc 0:1 ${kernel_addr_r} ${kernel}; fatload mmc 
0:1 ${fdt_addr_r} ${fdtfile}; fdt addr ${fdt_addr_r}; bootm ${kernel_addr_r} - 
+Optionally you may save the environment variables to SD card with 'saveenv'.
+To continue booting simply give the 'boot' command and NetBSD boots.
+Orange Pi PC acceptance tests
+The Orange Pi PC machine has several acceptance tests included.
+To run the whole set of tests, build QEMU from source and simply
+provide the following command:
+  $ AVOCADO_ALLOW_LARGE_STORAGE=yes avocado --show=app,console run \
+     -t machine:orangepi-pc tests/acceptance/boot_linux_console.py
index 6e1b92b5fa..b52ac2fb9e 100644
@@ -488,6 +488,7 @@ S: Maintained
  F: hw/*/allwinner-h3*
  F: include/hw/*/allwinner-h3*
  F: hw/arm/orangepi.c
+F: docs/orangepi.rst
ARM PrimeCell and CMSDK devices
  M: Peter Maydell <address@hidden>

reply via email to

[Prev in Thread] Current Thread [Next in Thread]