[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 02/10] ppc: Remove stub of PPC970 HID4 implementation
From: |
David Gibson |
Subject: |
Re: [PATCH v2 02/10] ppc: Remove stub of PPC970 HID4 implementation |
Date: |
Wed, 8 Jan 2020 12:08:50 +1100 |
On Tue, Jan 07, 2020 at 06:36:38PM +0100, Greg Kurz wrote:
> On Tue, 7 Jan 2020 18:32:15 +0100
> Greg Kurz <address@hidden> wrote:
>
> > On Tue, 7 Jan 2020 15:48:19 +1100
> > David Gibson <address@hidden> wrote:
> >
> > > The PowerPC 970 CPU was a cut-down POWER4, which had hypervisor
> > > capability.
> > > However, it can be (and often was) strapped into "Apple mode", where the
> > > hypervisor capabilities were disabled (essentially putting it always in
> > > hypervisor mode).
>
> Isn't it supervisor mode instead of hypervisor mode ?
No; hypervisor is correct. If the cpu was always in supervisor mode,
the boot OS couldn't access the hypervisor privileged registers that
are needed for basic setup (e.g. SDR1). "Apple mode" means the cpu
doesn't have a supervisor mode that _isn't_ hypervisor privileged and
hence, can't run guests.
>
> > >
> > > That's actually the only mode of the 970 we support in qemu, and we're
> > > unlikely to change that any time soon. However, we do have a partial
> > > implementation of the 970's HID4 register which affects things only
> > > relevant for hypervisor mode.
> > >
> > > That stub is also really ugly, since it attempts to duplicate the effects
> > > of HID4 by re-encoding it into the LPCR register used in newer CPUs, but
> > > in a really confusing way.
> > >
> > > Just get rid of it.
> > >
> > > Signed-off-by: David Gibson <address@hidden>
> > > ---
> >
> > Reviewed-by: Greg Kurz <address@hidden>
> >
> > > target/ppc/mmu-hash64.c | 28 +---------------------------
> > > target/ppc/translate_init.inc.c | 17 ++++++-----------
> > > 2 files changed, 7 insertions(+), 38 deletions(-)
> > >
> > > diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> > > index da8966ccf5..a881876647 100644
> > > --- a/target/ppc/mmu-hash64.c
> > > +++ b/target/ppc/mmu-hash64.c
> > > @@ -1091,33 +1091,6 @@ void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong
> > > val)
> > >
> > > /* Filter out bits */
> > > switch (env->mmu_model) {
> > > - case POWERPC_MMU_64B: /* 970 */
> > > - if (val & 0x40) {
> > > - lpcr |= LPCR_LPES0;
> > > - }
> > > - if (val & 0x8000000000000000ull) {
> > > - lpcr |= LPCR_LPES1;
> > > - }
> > > - if (val & 0x20) {
> > > - lpcr |= (0x4ull << LPCR_RMLS_SHIFT);
> > > - }
> > > - if (val & 0x4000000000000000ull) {
> > > - lpcr |= (0x2ull << LPCR_RMLS_SHIFT);
> > > - }
> > > - if (val & 0x2000000000000000ull) {
> > > - lpcr |= (0x1ull << LPCR_RMLS_SHIFT);
> > > - }
> > > - env->spr[SPR_RMOR] = ((lpcr >> 41) & 0xffffull) << 26;
> > > -
> > > - /*
> > > - * XXX We could also write LPID from HID4 here
> > > - * but since we don't tag any translation on it
> > > - * it doesn't actually matter
> > > - *
> > > - * XXX For proper emulation of 970 we also need
> > > - * to dig HRMOR out of HID5
> > > - */
> > > - break;
> > > case POWERPC_MMU_2_03: /* P5p */
> > > lpcr = val & (LPCR_RMLS | LPCR_ILE |
> > > LPCR_LPES0 | LPCR_LPES1 |
> > > @@ -1154,6 +1127,7 @@ void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong
> > > val)
> > > }
> > > break;
> > > default:
> > > + g_assert_not_reached();
> > > ;
> > > }
> > > env->spr[SPR_LPCR] = lpcr;
> > > diff --git a/target/ppc/translate_init.inc.c
> > > b/target/ppc/translate_init.inc.c
> > > index d33d65dff7..436d0d5a51 100644
> > > --- a/target/ppc/translate_init.inc.c
> > > +++ b/target/ppc/translate_init.inc.c
> > > @@ -7884,25 +7884,20 @@ static void spr_write_lpcr(DisasContext *ctx, int
> > > sprn, int gprn)
> > > {
> > > gen_helper_store_lpcr(cpu_env, cpu_gpr[gprn]);
> > > }
> > > -
> > > -static void spr_write_970_hid4(DisasContext *ctx, int sprn, int gprn)
> > > -{
> > > -#if defined(TARGET_PPC64)
> > > - spr_write_generic(ctx, sprn, gprn);
> > > - gen_helper_store_lpcr(cpu_env, cpu_gpr[gprn]);
> > > -#endif
> > > -}
> > > -
> > > #endif /* !defined(CONFIG_USER_ONLY) */
> > >
> > > static void gen_spr_970_lpar(CPUPPCState *env)
> > > {
> > > #if !defined(CONFIG_USER_ONLY)
> > > /* Logical partitionning */
> > > - /* PPC970: HID4 is effectively the LPCR */
> > > + /* PPC970: HID4 covers things later controlled by the LPCR and
> > > + * RMOR in later CPUs, but with a different encoding. We only
> > > + * support the 970 in "Apple mode" which has all hypervisor
> > > + * facilities disabled by strapping, so we can basically just
> > > + * ignore it */
> > > spr_register(env, SPR_970_HID4, "HID4",
> > > SPR_NOACCESS, SPR_NOACCESS,
> > > - &spr_read_generic, &spr_write_970_hid4,
> > > + &spr_read_generic, &spr_write_generic,
> > > 0x00000000);
> > > #endif
> > > }
> >
> >
>
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
signature.asc
Description: PGP signature
Re: [PATCH v2 02/10] ppc: Remove stub of PPC970 HID4 implementation, Greg Kurz, 2020/01/08
[PATCH v2 01/10] ppc: Drop PPC_EMULATE_32BITS_HYPV stub, David Gibson, 2020/01/06
[PATCH v2 03/10] target/ppc: Correct handling of real mode accesses with vhyp on hash MMU, David Gibson, 2020/01/06
[PATCH v2 08/10] target/ppc: Streamline calculation of RMA limit from LPCR[RMLS], David Gibson, 2020/01/06