qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v27 21/21] BootLinuxConsoleTest: Test the RX-Virt machine


From: Yoshinori Sato
Subject: [PATCH v27 21/21] BootLinuxConsoleTest: Test the RX-Virt machine
Date: Sat, 21 Dec 2019 23:42:38 +0900

From: Philippe Mathieu-Daudé <address@hidden>

Add two tests for the rx-virt machine, based on the recommended test
setup from Yoshinori Sato:
https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg03586.html

- U-Boot prompt
- Linux kernel with Sash shell

These are very quick tests:

  $ avocado run -t arch:rx tests/acceptance/boot_linux_console.py
  JOB ID     : 84a6ef01c0b87975ecbfcb31a920afd735753ace
  JOB LOG    : 
/home/phil/avocado/job-results/job-2019-05-24T05.02-84a6ef0/job.log
   (1/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_uboot: 
PASS (0.11 s)
   (2/2) tests/acceptance/boot_linux_console.py:BootLinuxConsole.test_rx_linux: 
PASS (0.45 s)
  RESULTS    : PASS 2 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | 
CANCEL 0

Tests can also be run with:

  $ avocado --show=console run -t arch:rx tests/acceptance/boot_linux_console.py
  console: U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty (Feb 05 2019 - 21:56:06 
+0900)
  console: Linux version 4.19.0+ (yo-satoh@yo-satoh-debian) (gcc version 9.0.0 
20181105 (experimental) (GCC)) #137 Wed Feb 20 23:20:02 JST 2019
  console: Built 1 zonelists, mobility grouping on.  Total pages: 8128
  ...
  console: SuperH (H)SCI(F) driver initialized
  console: 88240.serial: ttySC0 at MMIO 0x88240 (irq = 215, base_baud = 0) is a 
sci
  console: console [ttySC0] enabled
  console: 88248.serial: ttySC1 at MMIO 0x88248 (irq = 219, base_baud = 0) is a 
sci

Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Based-on: address@hidden
"RX architecture support"
Signed-off-by: Yoshinori Sato <address@hidden>
---
 tests/acceptance/boot_linux_console.py | 47 ++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/tests/acceptance/boot_linux_console.py 
b/tests/acceptance/boot_linux_console.py
index 9c6aa2040a..9976227b21 100644
--- a/tests/acceptance/boot_linux_console.py
+++ b/tests/acceptance/boot_linux_console.py
@@ -483,3 +483,50 @@ class BootLinuxConsole(Test):
         self.wait_for_console_pattern(console_pattern)
         console_pattern = 'No filesystem could mount root'
         self.wait_for_console_pattern(console_pattern)
+
+    def test_rx_uboot(self):
+        """
+        :avocado: tags=arch:rx
+        :avocado: tags=machine:rx-virt
+        :avocado: tags=endian:little
+        """
+        uboot_url = ('https://acc.dl.osdn.jp/users/23/23888/u-boot.bin.gz')
+        uboot_hash = '9b78dbd43b40b2526848c0b1ce9de02c24f4dcdb'
+        uboot_path = self.fetch_asset(uboot_url, asset_hash=uboot_hash)
+        uboot_path = archive.uncompress(uboot_path, self.workdir)
+
+        self.vm.set_machine('rx-virt')
+        self.vm.set_console()
+        self.vm.add_args('-bios', uboot_path,
+                         '-no-reboot')
+        self.vm.launch()
+        uboot_version = 'U-Boot 2016.05-rc3-23705-ga1ef3c71cb-dirty'
+        self.wait_for_console_pattern(uboot_version)
+        gcc_version = 'rx-unknown-linux-gcc (GCC) 9.0.0 20181105 
(experimental)'
+        # FIXME limit baudrate on chardev, else we type too fast
+        #self.exec_command_and_wait_for_pattern('version', gcc_version)
+
+    def test_rx_linux(self):
+        """
+        :avocado: tags=arch:rx
+        :avocado: tags=machine:rx-virt
+        :avocado: tags=endian:little
+        """
+        dtb_url = ('https://acc.dl.osdn.jp/users/23/23887/rx-qemu.dtb')
+        dtb_hash = '7b4e4e2c71905da44e86ce47adee2210b026ac18'
+        dtb_path = self.fetch_asset(dtb_url, asset_hash=dtb_hash)
+        kernel_url = ('http://acc.dl.osdn.jp/users/23/23845/zImage')
+        kernel_hash = '39a81067f8d72faad90866ddfefa19165d68fc99'
+        kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
+
+        self.vm.set_machine('rx-virt')
+        self.vm.set_console()
+        kernel_command_line = self.KERNEL_COMMON_COMMAND_LINE + 'earlycon'
+        self.vm.add_args('-kernel', kernel_path,
+                         '-dtb', dtb_path,
+                         '-no-reboot')
+        self.vm.launch()
+        self.wait_for_console_pattern('Sash command shell (version 1.1.1)')
+        self.exec_command_and_wait_for_pattern('printenv',
+                                               'TERM=linux')
+
-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]