qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 3/5] vfio/pci: Respond to KVM irqchip change notifier


From: Greg Kurz
Subject: Re: [PATCH 3/5] vfio/pci: Respond to KVM irqchip change notifier
Date: Fri, 22 Nov 2019 06:12:57 +0100

On Thu, 21 Nov 2019 11:56:05 +1100
David Gibson <address@hidden> wrote:

> VFIO PCI devices already respond to the pci intx routing notifier, in order
> to update kernel irqchip mappings when routing is updated.  However this
> won't handle the case where the irqchip itself is replaced by a different
> model while retaining the same routing.  This case can happen on
> the pseries machine type due to PAPR feature negotiation.
> 
> To handle that case, add a handler for the irqchip change notifier, which
> does much the same thing as the routing notifier, but is unconditional,
> rather than being a no-op when the routing hasn't changed.
> 
> Cc: Alex Williamson <address@hidden>
> Cc: Alexey Kardashevskiy <address@hidden>
> 
> Signed-off-by: David Gibson <address@hidden>
> ---
>  hw/vfio/pci.c | 23 ++++++++++++++++++-----
>  hw/vfio/pci.h |  1 +
>  2 files changed, 19 insertions(+), 5 deletions(-)
> 
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 521289aa7d..95478c2c55 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -256,6 +256,14 @@ static void vfio_intx_routing_notifier(PCIDevice *pdev)
>      }
>  }
>  
> +static void vfio_irqchip_change(Notifier *notify, void *data)
> +{
> +    VFIOPCIDevice *vdev = container_of(notify, VFIOPCIDevice,
> +                                       irqchip_change_notifier);
> +
> +    vfio_intx_update(vdev, &vdev->intx.route);
> +}
> +
>  static int vfio_intx_enable(VFIOPCIDevice *vdev, Error **errp)
>  {
>      uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1);
> @@ -2973,16 +2981,18 @@ static void vfio_realize(PCIDevice *pdev, Error 
> **errp)
>                                                    vfio_intx_mmap_enable, 
> vdev);
>          pci_device_set_intx_routing_notifier(&vdev->pdev,
>                                               vfio_intx_routing_notifier);
> +        vdev->irqchip_change_notifier.notify = vfio_irqchip_change;
> +        kvm_irqchip_add_change_notifier(&vdev->irqchip_change_notifier);
>          ret = vfio_intx_enable(vdev, errp);
>          if (ret) {
> -            goto out_teardown;
> +            goto out_deregister;
>          }
>      }
>  
>      if (vdev->display != ON_OFF_AUTO_OFF) {
>          ret = vfio_display_probe(vdev, errp);
>          if (ret) {
> -            goto out_teardown;
> +            goto out_deregister;
>          }
>      }
>      if (vdev->enable_ramfb && vdev->dpy == NULL) {
> @@ -2992,11 +3002,11 @@ static void vfio_realize(PCIDevice *pdev, Error 
> **errp)
>      if (vdev->display_xres || vdev->display_yres) {
>          if (vdev->dpy == NULL) {
>              error_setg(errp, "xres and yres properties require display=on");
> -            goto out_teardown;
> +            goto out_deregister;
>          }
>          if (vdev->dpy->edid_regs == NULL) {
>              error_setg(errp, "xres and yres properties need edid support");
> -            goto out_teardown;
> +            goto out_deregister;
>          }
>      }
>  

After this change, we end up with:

    if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) {
        vdev->intx.mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
                                                  vfio_intx_mmap_enable, vdev);
        pci_device_set_intx_routing_notifier(&vdev->pdev,
                                             vfio_intx_routing_notifier);
        vdev->irqchip_change_notifier.notify = vfio_irqchip_change;
        kvm_irqchip_add_change_notifier(&vdev->irqchip_change_notifier);
        ret = vfio_intx_enable(vdev, errp);
        if (ret) {
            goto out_deregister;
        }
    }

    if (vdev->display != ON_OFF_AUTO_OFF) {
        ret = vfio_display_probe(vdev, errp);
        if (ret) {
            goto out_deregister;
        }
    }
    if (vdev->enable_ramfb && vdev->dpy == NULL) {
        error_setg(errp, "ramfb=on requires display=on");
        goto out_teardown;
             ^^^^^^^^^^^^

This should be out_deregister.

The enable_ramfb property belongs to the nohotplug variant. It
means QEMU is going to terminate and we probably don't really
care to leak notifiers, but this still looks weird and fragile,
if enable_ramfb ever becomes usable by hotpluggable devices
one day.

    }
    if (vdev->display_xres || vdev->display_yres) {
        if (vdev->dpy == NULL) {
            error_setg(errp, "xres and yres properties require display=on");
            goto out_deregister;
        }
        if (vdev->dpy->edid_regs == NULL) {
            error_setg(errp, "xres and yres properties need edid support");
            goto out_deregister;
        }
    }


> @@ -3020,8 +3030,10 @@ static void vfio_realize(PCIDevice *pdev, Error **errp)
>  
>      return;
>  
> -out_teardown:
> +out_deregister:
>      pci_device_set_intx_routing_notifier(&vdev->pdev, NULL);
> +    kvm_irqchip_remove_change_notifier(&vdev->irqchip_change_notifier);
> +out_teardown:
>      vfio_teardown_msi(vdev);
>      vfio_bars_exit(vdev);
>  error:
> @@ -3064,6 +3076,7 @@ static void vfio_exitfn(PCIDevice *pdev)
>      vfio_unregister_req_notifier(vdev);
>      vfio_unregister_err_notifier(vdev);
>      pci_device_set_intx_routing_notifier(&vdev->pdev, NULL);
> +    kvm_irqchip_remove_change_notifier(&vdev->irqchip_change_notifier);
>      vfio_disable_interrupts(vdev);
>      if (vdev->intx.mmap_timer) {
>          timer_free(vdev->intx.mmap_timer);
> diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> index b329d50338..35626cd63e 100644
> --- a/hw/vfio/pci.h
> +++ b/hw/vfio/pci.h
> @@ -169,6 +169,7 @@ typedef struct VFIOPCIDevice {
>      bool enable_ramfb;
>      VFIODisplay *dpy;
>      Error *migration_blocker;
> +    Notifier irqchip_change_notifier;
>  } VFIOPCIDevice;
>  
>  uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);




reply via email to

[Prev in Thread] Current Thread [Next in Thread]