[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v9 QEMU 06/15] vfio: Add save and load functions for VFIO PCI
From: |
Alex Williamson |
Subject: |
Re: [PATCH v9 QEMU 06/15] vfio: Add save and load functions for VFIO PCI devices |
Date: |
Wed, 13 Nov 2019 22:00:35 -0700 |
On Tue, 12 Nov 2019 22:35:15 +0530
Kirti Wankhede <address@hidden> wrote:
> These functions save and restore PCI device specific data - config
> space of PCI device.
> Tested save and restore with MSI and MSIX type.
>
> Signed-off-by: Kirti Wankhede <address@hidden>
> Reviewed-by: Neo Jia <address@hidden>
> ---
> hw/vfio/pci.c | 168
> ++++++++++++++++++++++++++++++++++++++++++
> include/hw/vfio/vfio-common.h | 2 +
> 2 files changed, 170 insertions(+)
>
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 4ae02e71622a..2c22cca0c3be 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -41,6 +41,7 @@
> #include "trace.h"
> #include "qapi/error.h"
> #include "migration/blocker.h"
> +#include "migration/qemu-file.h"
>
> #define TYPE_VFIO_PCI "vfio-pci"
> #define PCI_VFIO(obj) OBJECT_CHECK(VFIOPCIDevice, obj, TYPE_VFIO_PCI)
> @@ -1620,6 +1621,55 @@ static void vfio_bars_prepare(VFIOPCIDevice *vdev)
> }
> }
>
> +static int vfio_bar_validate(VFIOPCIDevice *vdev, int nr)
> +{
> + PCIDevice *pdev = &vdev->pdev;
> + VFIOBAR *bar = &vdev->bars[nr];
> + uint64_t addr;
> + uint32_t addr_lo, addr_hi = 0;
> +
> + /* Skip unimplemented BARs and the upper half of 64bit BARS. */
> + if (!bar->size) {
> + return 0;
> + }
> +
> + /* skip IO BAR */
> + if (bar->ioport) {
> + return 0;
> + }
Why?
> +
> + addr_lo = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + nr * 4, 4);
> +
> + addr_lo = addr_lo & (bar->ioport ? PCI_BASE_ADDRESS_IO_MASK :
> + PCI_BASE_ADDRESS_MEM_MASK);
And if we've skipped IO BARs above, why are we checking for them here?
> + if (bar->type == PCI_BASE_ADDRESS_MEM_TYPE_64) {
> + addr_hi = pci_default_read_config(pdev,
> + PCI_BASE_ADDRESS_0 + (nr + 1) * 4,
> 4);
> + }
> +
> + addr = ((uint64_t)addr_hi << 32) | addr_lo;
> +
> + if (!QEMU_IS_ALIGNED(addr, bar->size)) {
> + return -EINVAL;
> + }
Why is this function even necessary?
> +
> + return 0;
> +}
> +
> +static int vfio_bars_validate(VFIOPCIDevice *vdev)
> +{
> + int i, ret;
> +
> + for (i = 0; i < PCI_ROM_SLOT; i++) {
> + ret = vfio_bar_validate(vdev, i);
> + if (ret) {
> + error_report("vfio: BAR address %d validation failed", i);
> + return ret;
> + }
> + }
> + return 0;
> +}
> +
> static void vfio_bar_register(VFIOPCIDevice *vdev, int nr)
> {
> VFIOBAR *bar = &vdev->bars[nr];
> @@ -2402,11 +2452,129 @@ static Object *vfio_pci_get_object(VFIODevice
> *vbasedev)
> return OBJECT(vdev);
> }
>
> +static void vfio_pci_save_config(VFIODevice *vbasedev, QEMUFile *f)
> +{
> + VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> + PCIDevice *pdev = &vdev->pdev;
> + uint16_t pci_cmd;
> + int i;
> +
Is the basis for what we're selecting to save and restore based
primarily on vfio_pci_write_config()? I'm nervous about what we're
choosing to save/load and why it isn't more extensive.
> + for (i = 0; i < PCI_ROM_SLOT; i++) {
> + uint32_t bar;
> +
> + bar = pci_default_read_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, 4);
> + qemu_put_be32(f, bar);
> + }
> +
> + qemu_put_be32(f, vdev->interrupt);
> + if (vdev->interrupt == VFIO_INT_MSI) {
> + uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
> + bool msi_64bit;
> +
> + msi_flags = pci_default_read_config(pdev, pdev->msi_cap +
> PCI_MSI_FLAGS,
> + 2);
> + msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
> +
> + msi_addr_lo = pci_default_read_config(pdev,
> + pdev->msi_cap + PCI_MSI_ADDRESS_LO,
> 4);
> + qemu_put_be32(f, msi_addr_lo);
> +
> + if (msi_64bit) {
> + msi_addr_hi = pci_default_read_config(pdev,
> + pdev->msi_cap +
> PCI_MSI_ADDRESS_HI,
> + 4);
> + }
> + qemu_put_be32(f, msi_addr_hi);
> +
> + msi_data = pci_default_read_config(pdev,
> + pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 :
> PCI_MSI_DATA_32),
> + 2);
> + qemu_put_be32(f, msi_data);
> + } else if (vdev->interrupt == VFIO_INT_MSIX) {
> + uint16_t offset;
> +
> + /* save enable bit and maskall bit */
> + offset = pci_default_read_config(pdev,
> + pdev->msix_cap + PCI_MSIX_FLAGS + 1,
> 2);
> + qemu_put_be16(f, offset);
> + msix_save(pdev, f);
> + }
> + pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
> + qemu_put_be16(f, pci_cmd);
> +}
> +
> +static int vfio_pci_load_config(VFIODevice *vbasedev, QEMUFile *f)
> +{
> + VFIOPCIDevice *vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> + PCIDevice *pdev = &vdev->pdev;
> + uint32_t interrupt_type;
> + uint32_t msi_flags, msi_addr_lo, msi_addr_hi = 0, msi_data;
> + uint16_t pci_cmd;
> + bool msi_64bit;
> + int i, ret;
> +
> + /* retore pci bar configuration */
> + pci_cmd = pci_default_read_config(pdev, PCI_COMMAND, 2);
> + vfio_pci_write_config(pdev, PCI_COMMAND,
> + pci_cmd & (!(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)),
> 2);
> + for (i = 0; i < PCI_ROM_SLOT; i++) {
> + uint32_t bar = qemu_get_be32(f);
> +
> + vfio_pci_write_config(pdev, PCI_BASE_ADDRESS_0 + i * 4, bar, 4);
> + }
> +
> + ret = vfio_bars_validate(vdev);
> + if (ret) {
> + return ret;
> + }
> +
> + interrupt_type = qemu_get_be32(f);
> +
> + if (interrupt_type == VFIO_INT_MSI) {
> + /* restore msi configuration */
> + msi_flags = pci_default_read_config(pdev,
> + pdev->msi_cap + PCI_MSI_FLAGS,
> 2);
> + msi_64bit = (msi_flags & PCI_MSI_FLAGS_64BIT);
> +
> + vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
> + msi_flags & (!PCI_MSI_FLAGS_ENABLE), 2);
> +
> + msi_addr_lo = qemu_get_be32(f);
> + vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_LO,
> + msi_addr_lo, 4);
> +
> + msi_addr_hi = qemu_get_be32(f);
> + if (msi_64bit) {
> + vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_ADDRESS_HI,
> + msi_addr_hi, 4);
> + }
> + msi_data = qemu_get_be32(f);
> + vfio_pci_write_config(pdev,
> + pdev->msi_cap + (msi_64bit ? PCI_MSI_DATA_64 :
> PCI_MSI_DATA_32),
> + msi_data, 2);
> +
> + vfio_pci_write_config(pdev, pdev->msi_cap + PCI_MSI_FLAGS,
> + msi_flags | PCI_MSI_FLAGS_ENABLE, 2);
> + } else if (interrupt_type == VFIO_INT_MSIX) {
> + uint16_t offset = qemu_get_be16(f);
> +
> + /* load enable bit and maskall bit */
> + vfio_pci_write_config(pdev, pdev->msix_cap + PCI_MSIX_FLAGS + 1,
> + offset, 2);
> + msix_load(pdev, f);
> + }
> + pci_cmd = qemu_get_be16(f);
> + vfio_pci_write_config(pdev, PCI_COMMAND, pci_cmd, 2);
> + return 0;
> +}
> +
> static VFIODeviceOps vfio_pci_ops = {
> .vfio_compute_needs_reset = vfio_pci_compute_needs_reset,
> .vfio_hot_reset_multi = vfio_pci_hot_reset_multi,
> .vfio_eoi = vfio_intx_eoi,
> .vfio_get_object = vfio_pci_get_object,
> + .vfio_save_config = vfio_pci_save_config,
> + .vfio_load_config = vfio_pci_load_config,
> };
>
> int vfio_populate_vga(VFIOPCIDevice *vdev, Error **errp)
> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> index 74261feaeac9..d69a7f3ae31e 100644
> --- a/include/hw/vfio/vfio-common.h
> +++ b/include/hw/vfio/vfio-common.h
> @@ -120,6 +120,8 @@ struct VFIODeviceOps {
> int (*vfio_hot_reset_multi)(VFIODevice *vdev);
> void (*vfio_eoi)(VFIODevice *vdev);
> Object *(*vfio_get_object)(VFIODevice *vdev);
> + void (*vfio_save_config)(VFIODevice *vdev, QEMUFile *f);
> + int (*vfio_load_config)(VFIODevice *vdev, QEMUFile *f);
> };
>
> typedef struct VFIOGroup {
- [PATCH v9 Qemu 00/15] Add migration support for VFIO devices, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 01/15] vfio: KABI for migration interface for device state, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 02/15] vfio iommu: Add ioctl defination to get dirty pages bitmap., Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 03/15] vfio iommu: Add ioctl defination to unmap IOVA and return dirty bitmap, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 04/15] vfio: Add function to unmap VFIO region, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 05/15] vfio: Add vfio_get_object callback to VFIODeviceOps, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 06/15] vfio: Add save and load functions for VFIO PCI devices, Kirti Wankhede, 2019/11/12
- Re: [PATCH v9 QEMU 06/15] vfio: Add save and load functions for VFIO PCI devices,
Alex Williamson <=
- [PATCH v9 QEMU 07/15] vfio: Add migration region initialization and finalize function, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 08/15] vfio: Add VM state change handler to know state of VM, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 09/15] vfio: Add migration state change notifier, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 10/15] vfio: Register SaveVMHandlers for VFIO device, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 11/15] vfio: Add save state functions to SaveVMHandlers, Kirti Wankhede, 2019/11/12
- [PATCH v9 QEMU 14/15] vfio: Add ioctl to get dirty pages bitmap during dma unmap., Kirti Wankhede, 2019/11/12