Re: [PATCH v3 07/10] migration: add new migration state wait-unplug

[Dr. David Alan Gilbert]

* Jens Freimann (address@hidden) wrote:
> This patch adds a new migration state called wait-unplug.  It is entered
> after the SETUP state and will transition into ACTIVE once all devices
> were succesfully unplugged from the guest.
> 
> So if a guest doesn't respond or takes long to honor the unplug request
> the user will see the migration state 'wait-unplug'.
> 
> In the migration thread we query failover devices if they're are still
> pending the guest unplug. When all are unplugged the migration
> continues. We give it a defined number of iterations including small
> waiting periods before we proceed.
> 
> Signed-off-by: Jens Freimann <address@hidden>
> ---
>  include/migration/vmstate.h |  2 ++
>  migration/migration.c       | 34 ++++++++++++++++++++++++++++++++++
>  migration/migration.h       |  3 +++
>  migration/savevm.c          | 36 ++++++++++++++++++++++++++++++++++++
>  migration/savevm.h          |  1 +
>  qapi/migration.json         |  5 ++++-
>  6 files changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h
> index 1fbfd099dd..39ef125225 100644
> --- a/include/migration/vmstate.h
> +++ b/include/migration/vmstate.h
> @@ -186,6 +186,8 @@ struct VMStateDescription {
>      int (*pre_save)(void *opaque);
>      int (*post_save)(void *opaque);
>      bool (*needed)(void *opaque);
> +    bool (*dev_unplug_pending)(void *opaque);
> +
>      const VMStateField *fields;
>      const VMStateDescription **subsections;
>  };
> diff --git a/migration/migration.c b/migration/migration.c
> index 5f7e4d15e9..a17d9fb990 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -52,9 +52,14 @@
>  #include "hw/qdev-properties.h"
>  #include "monitor/monitor.h"
>  #include "net/announce.h"
> +#include "qemu/queue.h"
>  
>  #define MAX_THROTTLE  (32 << 20)      /* Migration transfer speed throttling 
> */
>  
> +/* Time in milliseconds to wait for guest OS to unplug PCI device */
> +#define FAILOVER_GUEST_UNPLUG_WAIT 10000
> +#define FAILOVER_UNPLUG_RETRIES 5
> +
>  /* Amount of time to allocate to each "chunk" of bandwidth-throttled
>   * data. */
>  #define BUFFER_DELAY     100
> @@ -954,6 +959,9 @@ static void fill_source_migration_info(MigrationInfo 
> *info)
>      case MIGRATION_STATUS_CANCELLED:
>          info->has_status = true;
>          break;
> +    case MIGRATION_STATUS_WAIT_UNPLUG:
> +        info->has_status = true;
> +        break;
>      }
>      info->status = s->state;
>  }
> @@ -1695,6 +1703,7 @@ bool migration_is_idle(void)
>      case MIGRATION_STATUS_COLO:
>      case MIGRATION_STATUS_PRE_SWITCHOVER:
>      case MIGRATION_STATUS_DEVICE:
> +    case MIGRATION_STATUS_WAIT_UNPLUG:

I think the patchew failure that it shows in the migration test is
because that new state is visible to the test and it's not expecting it.

Dave

>          return false;
>      case MIGRATION_STATUS__MAX:
>          g_assert_not_reached();
> @@ -3224,6 +3233,8 @@ static void *migration_thread(void *opaque)
>      int64_t setup_start = qemu_clock_get_ms(QEMU_CLOCK_HOST);
>      MigThrError thr_error;
>      bool urgent = false;
> +    bool all_unplugged = true;
> +    int i = 0;
>  
>      rcu_register_thread();
>  
> @@ -3260,6 +3271,27 @@ static void *migration_thread(void *opaque)
>  
>      qemu_savevm_state_setup(s->to_dst_file);
>  
> +    migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
> +                      MIGRATION_STATUS_WAIT_UNPLUG);
> +
> +    while (i < FAILOVER_UNPLUG_RETRIES &&
> +           s->state == MIGRATION_STATUS_WAIT_UNPLUG) {
> +        i++;
> +        qemu_sem_timedwait(&s->wait_unplug_sem, FAILOVER_GUEST_UNPLUG_WAIT);
> +        all_unplugged = qemu_savevm_state_guest_unplug_pending();
> +        if (all_unplugged) {
> +            break;
> +        }
> +    }
> +
> +    if (all_unplugged) {
> +        migrate_set_state(&s->state, MIGRATION_STATUS_WAIT_UNPLUG,
> +                MIGRATION_STATUS_ACTIVE);
> +    } else {
> +        migrate_set_state(&s->state, MIGRATION_STATUS_WAIT_UNPLUG,
> +                          MIGRATION_STATUS_CANCELLING);
> +    }
> +
>      s->setup_time = qemu_clock_get_ms(QEMU_CLOCK_HOST) - setup_start;
>      migrate_set_state(&s->state, MIGRATION_STATUS_SETUP,
>                        MIGRATION_STATUS_ACTIVE);
> @@ -3508,6 +3540,7 @@ static void migration_instance_finalize(Object *obj)
>      qemu_mutex_destroy(&ms->qemu_file_lock);
>      g_free(params->tls_hostname);
>      g_free(params->tls_creds);
> +    qemu_sem_destroy(&ms->wait_unplug_sem);
>      qemu_sem_destroy(&ms->rate_limit_sem);
>      qemu_sem_destroy(&ms->pause_sem);
>      qemu_sem_destroy(&ms->postcopy_pause_sem);
> @@ -3553,6 +3586,7 @@ static void migration_instance_init(Object *obj)
>      qemu_sem_init(&ms->postcopy_pause_rp_sem, 0);
>      qemu_sem_init(&ms->rp_state.rp_sem, 0);
>      qemu_sem_init(&ms->rate_limit_sem, 0);
> +    qemu_sem_init(&ms->wait_unplug_sem, 0);
>      qemu_mutex_init(&ms->qemu_file_lock);
>  }
>  
> diff --git a/migration/migration.h b/migration/migration.h
> index 4f2fe193dc..79b3dda146 100644
> --- a/migration/migration.h
> +++ b/migration/migration.h
> @@ -206,6 +206,9 @@ struct MigrationState
>      /* Flag set once the migration thread called bdrv_inactivate_all */
>      bool block_inactive;
>  
> +    /* Migration is waiting for guest to unplug device */
> +    QemuSemaphore wait_unplug_sem;
> +
>      /* Migration is paused due to pause-before-switchover */
>      QemuSemaphore pause_sem;
>  
> diff --git a/migration/savevm.c b/migration/savevm.c
> index bb9462a54d..26e5bde687 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -942,6 +942,20 @@ static void qemu_savevm_command_send(QEMUFile *f,
>      qemu_fflush(f);
>  }
>  
> +static int qemu_savevm_nr_failover_devices(void)
> +{
> +    SaveStateEntry *se;
> +    int n = 0;
> +
> +    QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> +        if (se->vmsd && se->vmsd->dev_unplug_pending) {
> +            n++;
> +        }
> +    }
> +
> +    return n;
> +}
> +
>  void qemu_savevm_send_colo_enable(QEMUFile *f)
>  {
>      trace_savevm_send_colo_enable();
> @@ -1113,6 +1127,28 @@ void qemu_savevm_state_header(QEMUFile *f)
>      }
>  }
>  
> +bool qemu_savevm_state_guest_unplug_pending(void)
> +{
> +    int nr_failover_devs;
> +    SaveStateEntry *se;
> +    bool ret = false;
> +    int n = 0;
> +
> +    nr_failover_devs = qemu_savevm_nr_failover_devices();
> +
> +    QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
> +        if (!se->vmsd || !se->vmsd->dev_unplug_pending) {
> +            continue;
> +        }
> +        ret = se->vmsd->dev_unplug_pending(se->opaque);
> +        if (!ret) {
> +            n++;
> +        }
> +    }
> +
> +    return n == nr_failover_devs;
> +}
> +
>  void qemu_savevm_state_setup(QEMUFile *f)
>  {
>      SaveStateEntry *se;
> diff --git a/migration/savevm.h b/migration/savevm.h
> index 51a4b9caa8..ba64a7e271 100644
> --- a/migration/savevm.h
> +++ b/migration/savevm.h
> @@ -31,6 +31,7 @@
>  
>  bool qemu_savevm_state_blocked(Error **errp);
>  void qemu_savevm_state_setup(QEMUFile *f);
> +bool qemu_savevm_state_guest_unplug_pending(void);
>  int qemu_savevm_state_resume_prepare(MigrationState *s);
>  void qemu_savevm_state_header(QEMUFile *f);
>  int qemu_savevm_state_iterate(QEMUFile *f, bool postcopy);
> diff --git a/qapi/migration.json b/qapi/migration.json
> index 52e69e2868..5a06cd489f 100644
> --- a/qapi/migration.json
> +++ b/qapi/migration.json
> @@ -133,6 +133,9 @@
>  # @device: During device serialisation when pause-before-switchover is 
> enabled
>  #        (since 2.11)
>  #
> +# @wait-unplug: wait for device unplug request by guest OS to be completed.
> +#               (since 4.2)
> +#
>  # Since: 2.3
>  #
>  ##
> @@ -140,7 +143,7 @@
>    'data': [ 'none', 'setup', 'cancelling', 'cancelled',
>              'active', 'postcopy-active', 'postcopy-paused',
>              'postcopy-recover', 'completed', 'failed', 'colo',
> -            'pre-switchover', 'device' ] }
> +            'pre-switchover', 'device', 'wait-unplug' ] }
>  
>  ##
>  # @MigrationInfo:
> -- 
> 2.21.0
> 
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK