qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH v3 6/7] riscv/virt: Add the PFlash CFI01 device


From: Alistair Francis
Subject: [PATCH v3 6/7] riscv/virt: Add the PFlash CFI01 device
Date: Tue, 8 Oct 2019 16:32:25 -0700

Add the CFI01 PFlash to the RISC-V virt board. This is the same PFlash
from the ARM Virt board and the implementation is based on the ARM Virt
board. This allows users to specify flash files from the command line.

Signed-off-by: Alistair Francis <address@hidden>
Reviewed-by: Bin Meng <address@hidden>
Tested-by: Bin Meng <address@hidden>
---
 hw/riscv/Kconfig        |  1 +
 hw/riscv/virt.c         | 86 +++++++++++++++++++++++++++++++++++++++++
 include/hw/riscv/virt.h |  3 ++
 3 files changed, 90 insertions(+)

diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig
index fb19b2df3a..b12660b9f8 100644
--- a/hw/riscv/Kconfig
+++ b/hw/riscv/Kconfig
@@ -36,4 +36,5 @@ config RISCV_VIRT
     select SERIAL
     select VIRTIO_MMIO
     select PCI_EXPRESS_GENERIC_BRIDGE
+    select PFLASH_CFI01
     select SIFIVE
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index e4dcbadcb5..ad29e14d5f 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -26,6 +26,7 @@
 #include "hw/boards.h"
 #include "hw/loader.h"
 #include "hw/sysbus.h"
+#include "hw/qdev-properties.h"
 #include "hw/char/serial.h"
 #include "target/riscv/cpu.h"
 #include "hw/riscv/riscv_hart.h"
@@ -61,12 +62,77 @@ static const struct MemmapEntry {
     [VIRT_PLIC] =        {  0xc000000,     0x4000000 },
     [VIRT_UART0] =       { 0x10000000,         0x100 },
     [VIRT_VIRTIO] =      { 0x10001000,        0x1000 },
+    [VIRT_FLASH] =       { 0x20000000,     0x2000000 },
     [VIRT_DRAM] =        { 0x80000000,           0x0 },
     [VIRT_PCIE_MMIO] =   { 0x40000000,    0x40000000 },
     [VIRT_PCIE_PIO] =    { 0x03000000,    0x00010000 },
     [VIRT_PCIE_ECAM] =   { 0x30000000,    0x10000000 },
 };
 
+#define VIRT_FLASH_SECTOR_SIZE (256 * KiB)
+
+static PFlashCFI01 *virt_flash_create1(RISCVVirtState *s,
+                                       const char *name,
+                                       const char *alias_prop_name)
+{
+    /*
+     * Create a single flash device.  We use the same parameters as
+     * the flash devices on the ARM virt board.
+     */
+    DeviceState *dev = qdev_create(NULL, TYPE_PFLASH_CFI01);
+
+    qdev_prop_set_uint64(dev, "sector-length", VIRT_FLASH_SECTOR_SIZE);
+    qdev_prop_set_uint8(dev, "width", 4);
+    qdev_prop_set_uint8(dev, "device-width", 2);
+    qdev_prop_set_bit(dev, "big-endian", false);
+    qdev_prop_set_uint16(dev, "id0", 0x89);
+    qdev_prop_set_uint16(dev, "id1", 0x18);
+    qdev_prop_set_uint16(dev, "id2", 0x00);
+    qdev_prop_set_uint16(dev, "id3", 0x00);
+    qdev_prop_set_string(dev, "name", name);
+
+    object_property_add_child(OBJECT(s), name, OBJECT(dev),
+                              &error_abort);
+    object_property_add_alias(OBJECT(s), alias_prop_name,
+                              OBJECT(dev), "drive", &error_abort);
+
+    return PFLASH_CFI01(dev);
+}
+
+static void virt_flash_create(RISCVVirtState *s)
+{
+    s->flash[0] = virt_flash_create1(s, "virt.flash0", "pflash0");
+    s->flash[1] = virt_flash_create1(s, "virt.flash1", "pflash1");
+}
+
+static void virt_flash_map1(PFlashCFI01 *flash,
+                            hwaddr base, hwaddr size,
+                            MemoryRegion *sysmem)
+{
+    DeviceState *dev = DEVICE(flash);
+
+    assert(size % VIRT_FLASH_SECTOR_SIZE == 0);
+    assert(size / VIRT_FLASH_SECTOR_SIZE <= UINT32_MAX);
+    qdev_prop_set_uint32(dev, "num-blocks", size / VIRT_FLASH_SECTOR_SIZE);
+    qdev_init_nofail(dev);
+
+    memory_region_add_subregion(sysmem, base,
+                                sysbus_mmio_get_region(SYS_BUS_DEVICE(dev),
+                                                       0));
+}
+
+static void virt_flash_map(RISCVVirtState *s,
+                           MemoryRegion *sysmem)
+{
+    hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
+    hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
+
+    virt_flash_map1(s->flash[0], flashbase, flashsize,
+                    sysmem);
+    virt_flash_map1(s->flash[1], flashbase + flashsize, flashsize,
+                    sysmem);
+}
+
 static void create_pcie_irq_map(void *fdt, char *nodename,
                                 uint32_t plic_phandle)
 {
@@ -121,6 +187,8 @@ static void create_fdt(RISCVVirtState *s, const struct 
MemmapEntry *memmap,
     char *nodename;
     uint32_t plic_phandle, phandle = 1;
     int i;
+    hwaddr flashsize = virt_memmap[VIRT_FLASH].size / 2;
+    hwaddr flashbase = virt_memmap[VIRT_FLASH].base;
 
     fdt = s->fdt = create_device_tree(&s->fdt_size);
     if (!fdt) {
@@ -316,6 +384,15 @@ static void create_fdt(RISCVVirtState *s, const struct 
MemmapEntry *memmap,
         qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline);
     }
     g_free(nodename);
+
+    nodename = g_strdup_printf("/flash@%" PRIx64, flashbase);
+    qemu_fdt_add_subnode(s->fdt, nodename);
+    qemu_fdt_setprop_string(s->fdt, nodename, "compatible", "cfi-flash");
+    qemu_fdt_setprop_sized_cells(s->fdt, nodename, "reg",
+                                 2, flashbase, 2, flashsize,
+                                 2, flashbase + flashsize, 2, flashsize);
+    qemu_fdt_setprop_cell(s->fdt, nodename, "bank-width", 4);
+    g_free(nodename);
 }
 
 
@@ -495,6 +572,15 @@ static void riscv_virt_board_init(MachineState *machine)
         0, qdev_get_gpio_in(DEVICE(s->plic), UART0_IRQ), 399193,
         serial_hd(0), DEVICE_LITTLE_ENDIAN);
 
+    virt_flash_create(s);
+
+    for (i = 0; i < ARRAY_SIZE(s->flash); i++) {
+        /* Map legacy -drive if=pflash to machine properties */
+        pflash_cfi01_legacy_drive(s->flash[i],
+                                  drive_get(IF_PFLASH, 0, i));
+    }
+    virt_flash_map(s, system_memory);
+
     g_free(plic_hart_config);
 }
 
diff --git a/include/hw/riscv/virt.h b/include/hw/riscv/virt.h
index ffcdcc6dcc..8630f84592 100644
--- a/include/hw/riscv/virt.h
+++ b/include/hw/riscv/virt.h
@@ -21,6 +21,7 @@
 
 #include "hw/riscv/riscv_hart.h"
 #include "hw/sysbus.h"
+#include "hw/block/flash.h"
 
 #define TYPE_RISCV_VIRT_MACHINE MACHINE_TYPE_NAME("virt")
 #define RISCV_VIRT_MACHINE(obj) \
@@ -33,6 +34,7 @@ typedef struct {
     /*< public >*/
     RISCVHartArrayState soc;
     DeviceState *plic;
+    PFlashCFI01 *flash[2];
 
     void *fdt;
     int fdt_size;
@@ -46,6 +48,7 @@ enum {
     VIRT_PLIC,
     VIRT_UART0,
     VIRT_VIRTIO,
+    VIRT_FLASH,
     VIRT_DRAM,
     VIRT_PCIE_MMIO,
     VIRT_PCIE_PIO,
-- 
2.23.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]