qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 20/22] fuzz: add i440fx fuzz targets


From: Oleinik, Alexander
Subject: [Qemu-devel] [PATCH v3 20/22] fuzz: add i440fx fuzz targets
Date: Wed, 18 Sep 2019 23:19:47 +0000

These three targets should simply fuzz reads/writes to a couple ioports,
but they mostly serve as examples of different ways to write targets.
They demonstrate using qtest and qos for fuzzing, as well as using
rebooting and forking to reset state, or not resetting it at all.

Signed-off-by: Alexander Oleinik <address@hidden>
---
 tests/fuzz/Makefile.include |   3 +
 tests/fuzz/i440fx_fuzz.c    | 158 ++++++++++++++++++++++++++++++++++++
 2 files changed, 161 insertions(+)
 create mode 100644 tests/fuzz/i440fx_fuzz.c

diff --git a/tests/fuzz/Makefile.include b/tests/fuzz/Makefile.include
index 687dacce04..37d6821bee 100644
--- a/tests/fuzz/Makefile.include
+++ b/tests/fuzz/Makefile.include
@@ -3,5 +3,8 @@ fuzz-obj-y = $(libqos-obj-y)
 fuzz-obj-y += tests/libqtest.o
 fuzz-obj-y += tests/fuzz/fuzz.o
 fuzz-obj-y += tests/fuzz/fork_fuzz.o
+fuzz-obj-y += tests/fuzz/qos_fuzz.o
+
+fuzz-obj-y += tests/fuzz/i440fx_fuzz.o
 
 FUZZ_LDFLAGS += -Xlinker -T$(SRC_PATH)/tests/fuzz/fork_fuzz.ld
diff --git a/tests/fuzz/i440fx_fuzz.c b/tests/fuzz/i440fx_fuzz.c
new file mode 100644
index 0000000000..9079c40f55
--- /dev/null
+++ b/tests/fuzz/i440fx_fuzz.c
@@ -0,0 +1,158 @@
+#include "qemu/osdep.h"
+
+#include "fuzz.h"
+#include "tests/libqtest.h"
+#include "fuzz/qos_fuzz.h"
+#include "fuzz/fork_fuzz.h"
+#include "qemu/main-loop.h"
+#include "tests/libqos/pci.h"
+#include "tests/libqos/pci-pc.h"
+
+enum action_id {
+    WRITEB,
+    WRITEW,
+    WRITEL,
+    READB,
+    READW,
+    READL,
+};
+
+static void i440fx_fuzz_qtest(QTestState *s,
+        const unsigned char *Data, size_t Size) {
+
+    typedef struct QTestFuzzAction {
+        uint8_t id;
+        uint8_t addr;
+        uint32_t value;
+    } QTestFuzzAction;
+    QTestFuzzAction *a = (QTestFuzzAction *)Data;
+    while (Size >= sizeof(QTestFuzzAction)) {
+        uint16_t addr = a->addr % 2 ? 0xcf8 : 0xcfc;
+        switch (a->id) {
+        case WRITEB:
+            qtest_outb(s, addr, (uint8_t)a->value);
+            break;
+        case WRITEW:
+            qtest_outw(s, addr, (uint16_t)a->value);
+            break;
+        case WRITEL:
+            qtest_outl(s, addr, (uint32_t)a->value);
+            break;
+        case READB:
+            qtest_inb(s, addr);
+            break;
+        case READW:
+            qtest_inw(s, addr);
+            break;
+        case READL:
+            qtest_inl(s, addr);
+            break;
+        }
+        a++;
+        Size -= sizeof(QTestFuzzAction);
+    }
+    qtest_clock_step_next(s);
+    main_loop_wait(true);
+    reboot(s);
+}
+
+static void i440fx_fuzz_qos(QTestState *s,
+        const unsigned char *Data, size_t Size) {
+
+    typedef struct QOSFuzzAction {
+        uint8_t id;
+        int devfn;
+        uint8_t offset;
+        uint32_t value;
+    } QOSFuzzAction;
+
+    QOSFuzzAction *a = (QOSFuzzAction *)Data;
+    static QPCIBus *bus;
+    if (!bus) {
+        bus = qpci_new_pc(s, fuzz_qos_alloc);
+    }
+
+    while (Size >= sizeof(QOSFuzzAction)) {
+        switch (a->id) {
+        case WRITEB:
+            bus->config_writeb(bus, a->devfn, a->offset, (uint8_t)a->value);
+            break;
+        case WRITEW:
+            bus->config_writew(bus, a->devfn, a->offset, (uint16_t)a->value);
+            break;
+        case WRITEL:
+            bus->config_writel(bus, a->devfn, a->offset, (uint32_t)a->value);
+            break;
+        case READB:
+            bus->config_readb(bus, a->devfn, a->offset);
+            break;
+        case READW:
+            bus->config_readw(bus, a->devfn, a->offset);
+            break;
+        case READL:
+            bus->config_readl(bus, a->devfn, a->offset);
+            break;
+        }
+        a++;
+        Size -= sizeof(QOSFuzzAction);
+    }
+    qtest_clock_step_next(s);
+    main_loop_wait(true);
+}
+
+static void i440fx_fuzz_qos_fork(QTestState *s,
+        const unsigned char *Data, size_t Size) {
+    if (fork() == 0) {
+        i440fx_fuzz_qos(s, Data, Size);
+        counter_shm_store();
+        _Exit(0);
+    } else {
+        wait(NULL);
+        counter_shm_load();
+    }
+}
+
+static void fork_init(QTestState *s)
+{
+    counter_shm_init();
+}
+static const char *i440fx_qtest_argv[] = {"qemu_system_i386", "-machine", 
"accel=qtest"};
+
+static void register_pci_fuzz_targets(void)
+{
+    /* Uses simple qtest commands and reboots to reset state */
+    fuzz_add_target("i440fx-qtest-reboot-fuzz",
+            "Fuzz the i440fx using raw qtest commands and rebooting"
+            "after each run",
+            &(FuzzTarget){
+                .fuzz = i440fx_fuzz_qtest,
+                .main_argc = 3,
+                .main_argv = (char **)i440fx_qtest_argv,
+                });
+
+    /* Uses libqos and forks to prevent state leakage */
+    fuzz_add_qos_target("i440fx-qos-fork-fuzz",
+            "Fuzz the i440fx using qos helpers and forking"
+            "for each run",
+            "i440FX-pcihost",
+            &(QOSGraphTestOptions){},
+            &(FuzzTarget){
+            .pre_main = &qos_setup,
+            .pre_fuzz = &fork_init,
+            .fuzz = &i440fx_fuzz_qos_fork
+            });
+
+    /* Uses libqos. Doesn't do anything to reset state. Note that if we were to
+     reboot after each run, we would also have to redo the qos-related
+     initialization (qos_init_path) */
+    fuzz_add_qos_target("i440fx-qos-nocleanup-fuzz",
+            "Fuzz the i440fx using qos helpers. No cleanup done after each 
run",
+            "i440FX-pcihost",
+            &(QOSGraphTestOptions){},
+            &(FuzzTarget){
+            .pre_main = &qos_setup,
+            .fuzz = &i440fx_fuzz_qos
+            });
+}
+
+fuzz_target_init(register_pci_fuzz_targets);
-- 
2.23.0




reply via email to

[Prev in Thread] Current Thread [Next in Thread]