[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v5 2/4] raw: Recognize zoned backing devices
From: |
Dmitry Fomichev |
Subject: |
[Qemu-devel] [PATCH v5 2/4] raw: Recognize zoned backing devices |
Date: |
Fri, 23 Aug 2019 15:49:25 -0400 |
The purpose of this patch is to recognize a zoned block device (ZBD)
when it is opened as a raw file. The new code initializes the zoned
model propery introduced by the previous commit.
This commit is Linux-specific as it gets the Zoned Block Device Model
value (none/host-managed/host-aware) from sysfs on the host.
In order to avoid code duplication in file-posix.c, a common helper
function is added to read values of sysfs entries under
/sys/block/<dev>/queue. This way, the existing function that reads
the value of "max_segments" entry and the the new function that reads
"zoned" value both share the same helper code.
Signed-off-by: Dmitry Fomichev <address@hidden>
---
block/file-posix.c | 74 ++++++++++++++++++++++++++++++++++++++--------
block/raw-format.c | 8 +++++
2 files changed, 70 insertions(+), 12 deletions(-)
diff --git a/block/file-posix.c b/block/file-posix.c
index fbeb0068db..d9f2fc5e46 100644
--- a/block/file-posix.c
+++ b/block/file-posix.c
@@ -1067,15 +1067,13 @@ static int sg_get_max_transfer_length(int fd)
#endif
}
-static int sg_get_max_segments(int fd)
+static int hdev_read_blk_queue_entry(int fd, const char *key,
+ char *buf, int buf_len)
{
#ifdef CONFIG_LINUX
- char buf[32];
- const char *end;
char *sysfspath = NULL;
int ret;
int sysfd = -1;
- long max_segments;
struct stat st;
if (fstat(fd, &st)) {
@@ -1083,23 +1081,45 @@ static int sg_get_max_segments(int fd)
goto out;
}
- sysfspath = g_strdup_printf("/sys/dev/block/%u:%u/queue/max_segments",
- major(st.st_rdev), minor(st.st_rdev));
+ sysfspath = g_strdup_printf("/sys/dev/block/%u:%u/queue/%s",
+ major(st.st_rdev), minor(st.st_rdev), key);
sysfd = open(sysfspath, O_RDONLY);
if (sysfd == -1) {
ret = -errno;
goto out;
}
do {
- ret = read(sysfd, buf, sizeof(buf) - 1);
+ ret = read(sysfd, buf, buf_len - 1);
} while (ret == -1 && errno == EINTR);
if (ret < 0) {
ret = -errno;
- goto out;
} else if (ret == 0) {
ret = -EIO;
+ }
+out:
+ if (sysfd != -1) {
+ close(sysfd);
+ }
+ g_free(sysfspath);
+ return ret;
+#else
+ return -ENOTSUP;
+#endif
+}
+
+static int sg_get_max_segments(int fd)
+{
+#ifdef CONFIG_LINUX
+ char buf[32];
+ const char *end;
+ int ret;
+ long max_segments;
+
+ ret = hdev_read_blk_queue_entry(fd, "max_segments", buf, sizeof(buf));
+ if (ret < 0) {
goto out;
}
+
buf[ret] = 0;
/* The file is ended with '\n', pass 'end' to accept that. */
ret = qemu_strtol(buf, &end, 10, &max_segments);
@@ -1108,10 +1128,33 @@ static int sg_get_max_segments(int fd)
}
out:
- if (sysfd != -1) {
- close(sysfd);
+ return ret;
+#else
+ return -ENOTSUP;
+#endif
+}
+
+static int hdev_get_zoned_model(int fd)
+{
+#ifdef CONFIG_LINUX
+ char buf[32];
+ int ret;
+
+ ret = hdev_read_blk_queue_entry(fd, "zoned", buf, sizeof(buf));
+ if (ret < 0) {
+ ret = BLK_ZONED_MODEL_NONE;
+ goto out;
}
- g_free(sysfspath);
+
+ buf[ret - 1] = 0;
+ ret = BLK_ZONED_MODEL_NONE;
+ if (strcmp(buf, "host-managed") == 0) {
+ ret = BLK_ZONED_MODEL_HM;
+ } else if (strcmp(buf, "host-aware") == 0) {
+ ret = BLK_ZONED_MODEL_HA;
+ }
+
+out:
return ret;
#else
return -ENOTSUP;
@@ -1121,9 +1164,10 @@ out:
static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
{
BDRVRawState *s = bs->opaque;
+ int ret;
if (bs->sg) {
- int ret = sg_get_max_transfer_length(s->fd);
+ ret = sg_get_max_transfer_length(s->fd);
if (ret > 0 && ret <= BDRV_REQUEST_MAX_BYTES) {
bs->bl.max_transfer = pow2floor(ret);
@@ -1133,6 +1177,12 @@ static void raw_refresh_limits(BlockDriverState *bs,
Error **errp)
if (ret > 0) {
bs->bl.max_transfer = MIN(bs->bl.max_transfer, ret *
getpagesize());
}
+
+ }
+
+ ret = hdev_get_zoned_model(s->fd);
+ if (ret >= 0) {
+ bs->bl.zoned_model = ret;
}
raw_probe_alignment(bs, s->fd, errp);
diff --git a/block/raw-format.c b/block/raw-format.c
index 42c28cc29a..a606e4a7fe 100644
--- a/block/raw-format.c
+++ b/block/raw-format.c
@@ -369,6 +369,13 @@ static void raw_refresh_limits(BlockDriverState *bs, Error
**errp)
}
}
+static void raw_get_zoned_info(BlockDriverState *bs)
+{
+ if (!bs->probed) {
+ bs->bl.zoned_model = bs->file->bs->bl.zoned_model;
+ }
+}
+
static int coroutine_fn raw_co_truncate(BlockDriverState *bs, int64_t offset,
PreallocMode prealloc, Error **errp)
{
@@ -578,6 +585,7 @@ BlockDriver bdrv_raw = {
.create_opts = &raw_create_opts,
.bdrv_has_zero_init = &raw_has_zero_init,
.bdrv_has_zero_init_truncate = &raw_has_zero_init_truncate,
+ .bdrv_get_zoned_info = &raw_get_zoned_info,
.strong_runtime_opts = raw_strong_runtime_opts,
.mutable_opts = mutable_opts,
};
--
2.21.0
- [Qemu-devel] [PATCH v5 0/4] virtio/block: handle zoned backing devices, Dmitry Fomichev, 2019/08/23
- [Qemu-devel] [PATCH v5 4/4] raw: Don't open ZBDs if backend can't handle them, Dmitry Fomichev, 2019/08/23
- [Qemu-devel] [PATCH v5 1/4] block: Add zoned device model property, Dmitry Fomichev, 2019/08/23
- [Qemu-devel] [PATCH v5 3/4] block/ide/scsi: Set BLK_PERM_SUPPORT_ZONED, Dmitry Fomichev, 2019/08/23
- [Qemu-devel] [PATCH v5 2/4] raw: Recognize zoned backing devices,
Dmitry Fomichev <=
- Re: [Qemu-devel] [PATCH v5 0/4] virtio/block: handle zoned backing devices, no-reply, 2019/08/23
- Re: [Qemu-devel] [Qemu-block] [PATCH v5 0/4] virtio/block: handle zoned backing devices, Stefan Hajnoczi, 2019/08/28